Lenovo T400 / T500 :: T510 4384-DS9 - Cannot Find Any OPTIMUS Options In The BIOS
Sep 3, 2014
I was originally under the impression that my laptop (Thinkpad T510 4384-DS9) had NVIDIA Optimus display technology, however, I cannot find any OPTIMUS options in the BIOS under display (or any other section for that matter).
The reason I would like to know is that I have recently purchased a docking station (model: 4338) and 3 external monitors which I would like to use simultaneously.
Forgetting the fact that I'm using Linux, and that for most people this wouldn’t be a challenge worth undertaking, I would just like to know if my system actually supports 3 external monitors and the laptop screen concurrently using the docking station.
[URL]
View 7 Replies
ADVERTISEMENT
Aug 21, 2013
I have a T430 (2342-CTO) with an i7-3520M processor that I purchased at the beginning of 2013, and I loaded Virtualbox along with an appliance. When I ran the appliance, it gave me an error something to the effect that virtualization is unavailable on my machine.I went into the BIOS and found the settings for dynamic frequency and hyperthreading for the CPU, but I didn't see any entry for virtualization - where to look or what to do to enable this feature?
View 3 Replies
View Related
Oct 16, 2014
i cant find bios mode sata menu for ahci i use m.2ssd 256gb i want m,2ssd os boot!!
View 2 Replies
View Related
Aug 27, 2013
I have a T510 with a 128GB Samsung Solid State drive that is out of space. I would like to replace it with a larger one, preferably a Samsung 840 series with 500GB. I do not want to get an additional drive for the ultrabay, but rather replace the one I have. While shopping and researching, it looks like the drive I have is 78.5 x 54 x 5mm and all of the potential replacements are 100 x 69 x 7mm. Will this fit into the existing drive space? If it will not, what should I get? It also looks like the current drive is SATA II while all replacement options are SATA III.
View 3 Replies
View Related
Dec 7, 2013
Windows 7 64bit on my T510 has died. When logging in, it hangs on the login screen forever. Windows recovery failed too. It ran for 8 hours and reported error (something like error in restoring a file and disk is full, though my C drive is half empty). After that all the Windows restoration points are gone. So I suppose I have to do factory reset.
My question is, I made two additional partitions on my hard drive using external tools, which store all of my data. So when I do factory reset, will these two partitions be overwritten? How I can recover the system while keeping all my data?
View 2 Replies
View Related
Sep 7, 2010
I was watching a film on my projector, from my Lenovo T510 laptop, using a Display Port to HDMI cable. There was a thunderstorm and a powercut during the film, but my laptop wasnt plugged in at the time. Then when I touched the Display port end of the cable, which is plugged in to my laptop, it was too hot to touch, and had was slightly bulging and mis shapen! Now it has cooled down and just looks and feels normal. Very strange, and I dont see how it could have been related to the storm and powercut, but it seems a bit too coincidental! I have used this cable multiple times before and never noticed this, but then again maybe I wouldnt have ever touched it until it had cooled down. But I it was pretty much metling it was so hot, so I would think Id notice it.
View 3 Replies
View Related
Apr 2, 2011
Recently my T510 9 cell battery suddenly stopped working. According to the Lenovo battery utility, the battery condition is poor and it suggests replacing a battery.
However, the battery seems still have 99% capacity, either by Lenovo utility or by other softwares. Before the failing it lasts 3-4 hours and charges normally.
I read several posts online and see some people have similar problems. It is suggested that maybe one of the cells fail so the circuit stopped the battery from working/or the safety circuits just malfunctions? Or indeed I need to replace the battery.
I understand that messing with battery is risky and I believe it is detected as not working for a good reason. However, I am wondering if there is a way to assure that my battery is completely dead, but not a problem with other hardware or the OS, before I purchase a new battery. For example, using a volmeter on the whole batteryto see if I can get a reading, or opening up the battery case and test on each cell?
Is it doable to replace a single cell if one of them fails?
PS: For people who says that they connect two terminals of the battery to a volmeter and see no readings, I believe you also need to ground the safety pin to turn on the battery.
View 7 Replies
View Related
Dec 16, 2013
I recently purchased my new notebook (Lenovo T440p) which comes with OPTIMUS integrated Intel graphic card coupled by GeForce GT 730M 1GB. I tried to play some games; however for some reason in game options show, that my Intel HD card is being used as a default graphic card. This suggests that OPTIMUS technology is not switching the graphic card properly. System running on windows 8.1 Pro 64bit. How to enable Optimus switching?
View 4 Replies
View Related
Dec 28, 2013
I bought a T510 few days ago and was surprised to see this machine has ridiculously low volume. I have tried everything including the tweaks in Smart audio and removing audio limiter but still the volume is very low. On my dell 1525, I never go past 40% volume on my headphones but on T51o, I am using 90-100% volume to watch videos on live streaming websites.
Is there any solution to boost the volume on T510? My system is with windows 7 ultimate (64-bit) and audio device is Conexant 20585.
View 9 Replies
View Related
Dec 28, 2013
I have a lenovo T510 which has a maximum res of 1366x768 it has nvidia NVS 3100M graphics.Ive checked with nvidia and it says the gfx card supports 1920x1080.
If its possible could i buy a 1920x1080 lcd and fit it to this laptop without any problems.Or shall i just buy a 1366x768 lcd.
View 8 Replies
View Related
Nov 1, 2010
I just got a Thinkpad T510 and when I turn on the NumLock a little black box appears on the screen when it is on and I want to know how to make that not appear when the NumLock is turned on,
View 7 Replies
View Related
Dec 19, 2013
I've got little issues with screen brightness on my T510.
Sometimes after returning from hybernate/sleep I cannot control screen brightness at all (chaning it by Fn+Home/End or from PowerManager just dont work).
I have got latest nNvidia NVS 3100M drivers.
View 1 Replies
View Related
Nov 22, 2014
I've just out my hdd to check whether the ssd will fit there, just checked whether the slot is ok. Then I put back the original HHD very carefully. After that I opened the extra RAM slot, took it out and put it back, also VERY carefully. I didn't harm the laptop in any way.
Then I turned the computer on and it was just a black screen, nothing happening. No indicators lighted up, except for power button. I cannot enter BIOS, no response whatsoever.
View 3 Replies
View Related
Feb 6, 2009
I have a T510 running Win7 64-bit. For at least 3 years, I have had the same dual monitor setup (2 DoubleSight DS-1900S) running off my minidock with the laptop closed. The rgith monitor is the primary, running off the DVI port, while the left uses the analog port. I was away for a week at Scout camp, powered on the system once while I was there, and when I came back to the office, my monitor setup started failing.
Specifically, the right screen is active but it no longer displays the signal being sent to it. When I powercycle the screen, I can see the display for about a quarter of a second, then it goes blank. When the problem first started, I could cycle it about 20 times and eventually it would stay on, until I left the unit overnight and it went to sleep, at which point the probelm started again.
Sounds like a wonky monitor? I have a backup set of monitors that I swapped in, and had the same exact problem, so that appears to rule out a mechanical defect. More fun facts: I can only use the laptop screen as a standalone display. I cannot get the multidisplay control panel to open, even though my left screen is powered up. However, one of my programs that normally launches to my right (main) screen will still launch, but not to my laptop screen. It really wants to live on my right screen, even when that screen is not powered on (I can close the program by accessing the icon bar at the bottom of my laptop screen).
View 2 Replies
View Related
Dec 30, 2013
I recently picked up a T431s from the outlet. Nice ultrabook. Lighter than my T520 and T410. I have been using the 4337 and 4338 dock solutions for both of those units. I had done research before purchasing the T431s and was assured by Lenovo that the unit would work in both a 4337 and 4338 with an adapter (part number 04x0856 - Lenovo CS09 Dock Adapter). The part is shown here: CS09 Part. The T431s did not ship with the Lenovo CS09 Dock Adapter and I have been looking everywhere to locate one so that I can use it in either the 4337 or 4338 dock. Is there another part number that I am missing?
View 3 Replies
View Related
May 23, 2014
I was looking for the software to disable the touchpad. I saw a video that had the option but it was windows 8 and I have been unable to find the same options for 7. The thinkpad tab in the screen shot is not showing up in 7.
Link to image
View 3 Replies
View Related
Jan 26, 2014
I just recently purchased a ThinkPad T530 (type/model# 2429-C93) which should have the following options present according to Lenovo´s product information:
i5-3320M(2.6GHz), 4GB RAM, 500GB 7200rpm HD, 15.6in 1366x768 LCD, Intel HD Graphics, Intel 802.11agn wireless, WWAN, Bluetooth, 1Gb Ethernet, UltraNav, Secure Chip, Fingerprint reader, Camera, 6c Li-Ion, Win7 Pro 64.
However, there is no Bluetooth device detected while trying to install the respective driver. Also, installation of the Integrated Camera Driver runs, but disappears at some point in time, with no error message or pop-up indicating a successful installation. Third, while trying to configure the Fingerprint sensor, the ThinkPad Fingerprint software states there is no device available.
Both camera and FP sensor are physically visible, where the green Bluetooth LED known from an R61 and T410 is missing at the lower edge of the lid.
Fn+F5 and Fn+F6 keys don´t provide an option to toggle on/off Bluetooth and camera, but only WiFi/WWAN and Audio options.
Device Manager does not show any unknown devices or such related to these functions.
Is there a chance that these options are missing in a specific laptop, despite specified for its type/model# (serial#: R9V8MNB)?
Or do I need to first activate the options in the BIOS?
View 5 Replies
View Related
Jun 19, 2012
Got a new T440 yesterday. Good machine, only a small issue with the Windows 7 System Restore feature that i'm not able to fix:
I wanted to try system restore but it did not work properly. There are numerous system restore points created but i'm not able to revert to one of these restore points. It says Local Disk (Unknown) - The station cannot be found. (Picture in Dutch)
After i received the T440, i created a new partition on the 256GB Samsung SSD. Maybe this is the reason system restore is not working properly?
I already fixed the mbr, but this makes no difference. In the picture below, you can see the partitions. I
only reduced the size of the C: partition and created a new D: partition. The *SYSTEM_DRV, Q: Lenovo Recovery and the *: 7.00 GB partition are not changed at all.
System specs:
Windows 7 SP1 x64
i7-4600U
256GB Samsung SSD
8,00GB Ram
View 1 Replies
View Related
Sep 28, 2014
I purchased this wonderful machine from a friend of mine after he had me install a copy of Windows 7 (64) onto it. I am not entirely sure when this problem started.
Problem: I can access my BIOS, but my settings are completely greyed out, I cannot select, much less change anything in it. After startup and I press the "BLUE" button, it prompts me for a power up password, so I press the enter key without typing anything in, which is how I believe I set it, and it allows me to "see" the BIOS settings. I am never prompted for a SVP as I do not believe there is one, although when gazing into the mystic BIOS I see the security settings are as follows-
SUPERVISOR PASSWORD [ENTER]
PASSWORD STATUS ENABLED
LOCK VEFI BIOS SETTINGS ENABLED
SET MINIMUM LENGTH DISABLED
PASSWORD AT
UNATTENDED BOOT [ENABLED]
PASSWORD AT START DISABLED
The entire section is greyed out, and I do realize that I am indeed missing some settings that ARE in my BIOS, such as HDD Password (NONE) and I believe something else.
I am trying to edit my display and optimus settings, as I am an avid game player, and the NVIDIA card appears to be a much better option, but I however, cannot.
View 4 Replies
View Related
Jan 3, 2012
I want to run a Virtual PC in VirtualBox and get the message, that I need to enable VT-x. I have updated to the newest bios (1.31) but i still don't have the option to enable "Intel Virtualization Technology" under the Config --> CPU menu.
View 7 Replies
View Related
Nov 9, 2009
I have a T400 2765-P3U model, and it won't boot up. When you turn it on, you see the Thinkvantage logo and it stays there. Trying to access the BIOS is non-responsive. I connected the hard drive to see if it was a hard drive issue, but it's not. The hard drive is response when connected via USB. I can't get past the Thinkvantage logo, no response when attempting to access the BIOS. It's still under warranty, so I'll probably send it in for repair but thought I'd give it a try fixing it before hand.
View 9 Replies
View Related
Jun 20, 2014
I am using T440. I just upgrade the operating system from windows 7 to windows 8 using recovery disk. I upgrade according to the manual paper in the box.
The issue is, the windows 8 is installed in my HDD with capacity 500GB and the SSD 16GB are not detected. My question is, it should be installed in my 500GB HDD or the SSD drive? What are the correct steps to do recovery if I 500GB HDD and SSD drive?
View 1 Replies
View Related
Sep 12, 2012
I am unable to enter the BIOS (or the boot device and application menu) of my T530. When I press Enter at the 'Press Enter to interrupt normal startup' prompt, nothing happens. It just ignores my input completely. F1 doesn't do anything either.
Otherwise my ThinkPad is working fine, but I would like to change some settings (especially change the boot device, to boot from USB).
View 9 Replies
View Related
Jul 23, 2014
I want to upgrade my BIOS, but there is no update available for bios in windows 8.1.. My Bios version is 1.18, I want to update because i read somewhere that if your fan make noise make sure you have updated BIOS :A.. I want to know if I can install "BIOS update for win 8" in my lenovo t410 with windows 8.1..
View 7 Replies
View Related
Jun 2, 2014
How can i remove my bios password on a t410s and on t410. I work by selling refubished computer and i have some t410s and t410 but with bios password, can i flash bios, to remove it?if yes, how?
Is there any jumpers on them (specially on t410s)...
View 1 Replies
View Related
Oct 3, 2014
I purchased online a T440s brand new. I opened the box for the first time myself. When I enter BIOS it asks for password and I just hit enter without entering any password. I can enter the BIOS but i can not change any settings.
What can I do? Can a brand new thinkpad come with a BIOS password out the box?
I get conflicting information regarding the type of password. First image says it's power on which can be removed but bios says its supervisor.
View 9 Replies
View Related
Nov 22, 2013
I am new to having a thinkpad and I know that my system has a the intigrated graphics and the discrete nvidia nvs 3100m Optimus card. Here is the issue though. I have been trying to run some programs that are more video oriented (gaming). I discovered that my system is only reading the intigrated graphics and doesn't even acknowledge that the nvidia card is there.
I have updated to the latest drivers and checked the Bios to make sure things are there. Sadly they are not. I looked at the bios, followed the directions I found on the forum to set that to card to on only to find that the the only card it recognizes is the intigrated graphics. So the question is, how do I get the bios and the computer in general to recognize the nvidia card on my T410 (2522)?
View 5 Replies
View Related
Nov 17, 2014
I recently bought a t440s from a friend, And i wanted to lookup its warranty.The serial under the battery is recognised by the lenovo warranty check, But in the bios the serial shows up as R8000000, Could this become a problem for me in the future? refrain from bumping your thread(s) / post(s) more frequently than 3 days. Doing so, unfairly, pushes other members' threads downwards.
View 3 Replies
View Related
Apr 8, 2014
I think my attempt to update BIOS with a "BIOS update bootable CD" method has failed!
My laptop: Lenovo Thinkpad T420, i5 @ 2.5GHz, 4 GB RAM.
My old BIOS infos (taken from Setup before update attempt):
UEFI BIOS Version 83ET52WW (1.22)
UEFI BIOS Date (Year-Month-Day) 2011-03-24
Embedded Controller Version 83HT27WW (1.11)
I intended to update my BIOS to version 1.46 using "BIOS Update Bootable CD" from this link: [URL] .....
Steps:
1) I downloaded this ISO image: [URL] .... and burned it on a DVD-RW(DVD rewritable) medium.
2) I placed the DVD in my T420 and turned it off, then turned it on, select F12 (boot menu), selected DVD to boot from, and the BIOS update utility started.
3) In BIOS update utility I pressed "1" to read the instructions, then press "2" to update BIOS. I clicked "Y" to confirm and the update operation started. First it said " Now updating... ", then afer about 2 minutes, it said "Still updating ..." and it stuck like this.
So, right now, this message stays on my screen for about 1,5 hours(!!!):
"Still updating...
It may take about a few minutes.
<<< CAUTION >>>
Do not turn off the computer during the update.
Do not remove the CD during the update."
Other details (on system setup and current behaviour): AC was continously plugged in before&during BIOS update, battery is OK, no hard disk activity at all, keyboard is(seems) unresponsive, system's temperature is pretty high, but not dangerously high...
View 5 Replies
View Related
Mar 26, 2014
After the latest system update from Lenovo System update, my laptop T530 doesn't do a successful cold boot. A warm successive boot (with interruptible boot screen) works fine.
But cold boot always fails and the system powers down in less than 5s. This is seen after the BIOS updated to 2.59.1.12. restore to older version of BIOS(downgrade it)?
View 9 Replies
View Related
