I have an hp 8510w notebook and I just updated its graphic card driver for Nvidia FX 570M via Windows Update (dated 29.1.2009) because so far I had positive experiences with it. But not this time! Since I updated it the screen is not as bright as it was any more... It is actually so dark my eyes hurt when typing in Word for instance... and the brightness is on max
how to restore my previous driver.
i have hp pavilion dv6 1245dx in win 7 need to instal win xp when i instal xp on it .
pc show some error like full screen blue
i bought a dv3 series laptop, as usual it comes with crapware vista.
I downgraded it to windows xp without a problem. i am having lot of issues trying to install the drivers.
I loaded sp3, right after i installed windows. I downloaded the drivers from [Drivers] HP dv3, Compaq CQ35 / CQ36 (INTEL) most of the drivers installed fine, the problem i am getting is with the graphic card driver, nvidia refuses to install, saying that cannot find hardware configuration for your specific hardware type. for the sound i install the UAA update for sp3 which i found from [url] after i install the operating system finds audio on high speed blah blah, load the driver and when i restart the soundcard disappears. cant get my head around this. after installing most of this, i am left with 4-5 unknown device entries in device manager. cant figure out what is causing this.
The sound overlay keeps coming on every 2 seconds with the sound like its changing the volume, but it isnt. If i try using my finger it goes up and down maybe 2 bars then goes back to where it was stuck at after going mental for another 5 seconds. I can only change the volume using the taskbar icon, but the overlay keeps coming on. mute doesnt work, pause/play etc doesnt work, quickplay. You can imagine its incredibly annoying.
Is there a driver i can reinstall or something?
[url]
Its a vid file of the problem, when you see the bars going up and down, thats me trying to change the volume.
i have the hp dv5t-1000 CTO and here's my problem:
I cant figure out what driver i need to download to fix that. I think it's something to do with my USB ports, but that doesn't make any sense. thanks in advance!
edit: i tried to DL this:
JMicron Card Reader Driver
[url]
but it freezes in the installer everytime.
im missing a few drivers
device 1
FieldValue
Device Properties
Driver DescriptionPCI Data Acquisition and Signal Processing Controller
Hardware IDPCIVEN_8086&DEV_2932&SUBSYS_3602103C&REV_03
Location Information@system32driverspci.sys,#65536;PCI bus %1, device %2, function %3;(0,31,6)
PCI DevicePCI Data Acquisition and Signal Processing Controller [NoDB]
Device Resources
IRQ11
MemoryDC704000-DC704FFF
device 2
FieldValue
Device Properties
Driver DescriptionSM Bus Controller
Hardware IDPCIVEN_8086&DEV_2930&SUBSYS_3602103C&REV_03
Location Information@system32driverspci.sys,#65536;PCI bus %1, device %2, function %3;(0,31,3)
PCI DeviceSM Bus Controller [NoDB].........
I upgraded an old Compaq (1200Xl500) from WIN ME to XP not realizing this was a bad choice. Everything went okay except I lost my network adapter and PCMCIA which worked fine before the upgrade. No help from HP support and no drivers to download there either. I need a Texas Instruments PCI 1410 card bus controller. When I do a search I find links but nothing that works. Some links just refer me to Windows update? and there is nothing there either.
View 8 Replies View Relatedhad a pre-installed vista on my 6680ej and everything was fine, till i upgraded to windows 7. now i have an unknown device in device manager called Intel(R) ICH8M LPC Interface Controller - 2815 and i can't seem to find drivers for it.
View 5 Replies View RelatedIm running Vista 32 on a 6710b and I want to install the latest X3100 driver from the Intel site, but it tells me the driver is not made for my laptop and to get the driver from the manufacture of the laptop. Ive seen this come up with a google search, but in every instance, there is no solution. Is there a way to install the latest drivers from Intel, or do I have to wait for HP to make them available on their site?
View 5 Replies View RelatedI got a Dv9500 although the lid says its a Pavillion DV9000 and I am dying for the ethernet driver and the OHCI Compliant IEEE 1395 host controller drivers.
View 3 Replies View RelatedI've an HP 6510B and I don't know which is the sd/mmc card reader driver to download.
Actually the card readibility is not available under my system. I' ve installed win xp professional.
I acquired last week the above mentioned laptop for my wife. The use for it is basically browsing, shopping, skyping, messaging, searching over the net, no gaming.
To make it short and not to bother you with long stories: My brother gave me an original Ultimate Vista 64 with its own license and I'm planning to install it on this new laptop delivered with Premium 32 bits to fully use the 4 Gig Ram.
I've collected all the necessary drivers to proceed, but one, only one driver is giving me a major headache, the driver for the chipset Intel Cantiga PM45...I simply can't find it, neither on Intel's site...as if it never has existed.
Everest tell's me:
- Manufacturer: Quanta
- Chipset: Intel GM45/GM47/GS45/PM45 Yes (Intel Cantiga PM45) Montevina Platform
- Northbridge: Intel Cantiga PM45
- Southbridge: Intel 82801IM ICH9M
And here a screenshot with Cpuz
Maybe I don't even need that driver, but having built many xp desktops, I guess that there's no possible workaround without that driver...
my laptop is dv2500 and for e past 2 days, my display driver has been giving me a lot of problems.
at times, the screen would just go fuzzy and i won't be able to see anything so i have to power off my computer. at times, the screen goes totally blank and the computer restarts itself. when it does restart the screen stays blank and i have to shut down using alt+f4. at times i'll just get a BSOD for nvlddmkm error. and at times, the screen will go black and then return with the message "the display driver stopped responding and has recovered". the screen was fuzzy but i still did manage to make out that message.
i rolled back my driver to the default drivers that came with this laptop and after that, e screen has only gone blank once only to come back again totally alright 3 secs later with the same "display driver recovered" message.
this only started happening like 2-3 days ago but today it happened like atleast 5-6 times within 6 hrs. so i was wondering what's really the problem? i have searched around for people having this problem but their problem isn't as unique as mine. for them, it usually happens while playing games. for me it happens anytime, like during normal usage or whatever.
I have been able to install Windows XP on an HP DV5-1125NR and I have a problem with the following devices.
Network Adapters-
Atheros AR5007 802.11 b/g - System sees this device but places a "!" over it. Driver Detail shows:
PCIVen_168C&DEV_001C&SUBSYS_137A103C&REV_014&201108AE&0&0028
Other Devices-
Unknown Device - No idea what this is.
Driver Detail shows :
ACPIENE01004&15458EF3&0
System Devices-
HP Mobile Data Protection Sensor - Has a "!"
Driver Detail shows:
ACPIHPQ00043&2411E6FE&0
my dv6-2044ca (amd turion ii mobile dual core, 4gb ram, mobility radeon hd 4200), whenever i try to connect to a network and it fails, i have this thing sticking on my desktop wherever i go until i shut down the computer...
second question,
HP's display drivers (ati) are 8.635xxxxx and it's what i currently have.
however, at ATI's website, they have the 8.65 version..
what is recommended?
should i take the HP's drivers, but less updated? or should i take the gfx maker's updated drivers, but not from HP?
my friend has the 8.65 and it has "-ATI" at the end whereas i have the 8.635 and it has "-HP" at the end.
my notebook is hp dv4t-1400, i've just install win7, but i can't setup driver Nvidia GeForce G 105M/103M Graphics Driver. it report "The NVIDIA setup program could not locate any driver that are compatible with your current hardware. Setup will now exit".
View 5 Replies View RelatedI recently did a clean install from Vista 64 to Windows 7 64... I was upgrading my drivers today but came across a problem... When I install the newest driver (here) for my Realtek Family PCI-E Fast Ethernet NIC port, my download speed (from speedtest.net) drops from 20-25,000 Mbs to 5,000 Mbs
The newest driver is 7.4.713.2009... The one which installed when I loaded up the HP / Windows 7 discs was version 7.2.1127.2008, so when I saw my speed drop so much I rolled back to this driver... So what am I missing here? Why is the newer driver causing the speed to drop so much?
I did an upgrade to windows 7 RC 7100 and my 3DMark scores took a dive to 935. I tried 2 different drivers, but my scores didn't improve. Anyone isntall windows 7, and got better scores? if so, what drivers did you use?
View 9 Replies View RelatedI keep getting this error whenever i play Team Fortress 2 or WoW, in WoW my screen flashes black for about 2 seconds then comes back on, it really doesn't effect my game play but it's different for tf2. I play in windowed mode and when i get the message 'display driver stopped working' the game flashes black for about 10 or more seconds. I'm not sure what to do, here are my computer specs
HP Pavilion dv6700 Notebook
intel core 2 duo cpu 1.83 ghz
3 gb ram
I'm running on 32-bit windows vistas
all of the options work on win7/7229/64 bit.
Even through there are 4 weeks until Win7 officially hits the street. No sense cutting to too close.....
I have an HP dv6-1154TX notebook which has a mobility radeon 4650 graphics card. I read in a thread in this forum that you can overclock the GPU in the new version 9 catalyst drivers. When I go to the AMD site, there is no HD4650 under mobility radeon driver list.
Actually there are no HD series cards at all, only the older x1900, etc.. So do the HD series mobility radeons use the normal radeon drivers?
I have a dv5-1235dx that i wiped clean and installed Windows 7 Professional. My first round of updates took care of most drivers like scrolling and sound. My laptop has the touch sensitive button up top for volume, mute, play, pause etc.
The volume buttons work but the volume bar no longer displays on screen and it doesnt "click" as you change the volume.
I have the HP page for drivers [url] but dont know what i need. I installed HP quick launch buttons but that didnt do it.
Does anyone know which driver it is? Also which ones should i get and is there a specific way to install them or just run them?
I bought one of these monsters a couple of months ago. Downgraded (?) it to XP pro sp3 and got everything working except the IR remote control.
View 4 Replies View RelatedThe new driver 195.62 gives me BSODing upon just logging in to my machine.
After first reboot upon installing the driver, it worked fine for a few minutes and then BSOD'd while watching a flash video. It then BSODs whenever I try to log back in to the machine. I've since uninstalled the driver through safe mode.
I have a HP HDX 16, Nvidia 130m, 2.1ghz C2D, Windows 7 64bit.
I did a clean install of the driver (ie. uninstalling through control panel, going into safe mode and using driver sweeper, then installing again through normal mode).
I'm converting my lap top from vista to xp pro:
mobo: Quanta 30d3
compaq presario F504eu
I've managed to install some of the drivers for my laptop but 2 yellow question marks are still in my device manager - under "other devices" there's a yellow question mark next to "unknown device" and "video controller (VGA compatible)"
hp's website doesn't list the nvidia driver or any other, as for the unknown device - well i'll find out about that later no doubt!
where i can
1. get my video driver
2. a complete list of driver downloads (free)
I have a weird behavior of my brand new HP HDX18 (running Windows Vista 64 bit).
The Laptop does not play BluRay DVDs any more. It only worked two times. I can access the BluRay file system so I assume that the BluRay drive is working. Then trying to watch the movie with either HP MediaSmart or Windows Media Center, both programs hang and need to be stopped via Task Manager.
HP support recommended a video driver update - but...
When I try to install the recommended update of the display driver from the HP HDX18 support site, it installs and the laptop remains working (I hear sounds when receiving new emails or when wiping my finger on the finger print sensor), but the result is simply a black screen. Same thing when using the nvidia beta drivers for notebook chips.
I tried to first switch to Standard VGA, then removing the old nvidia package, then installing the new driver. Same result: A black screen.
All I can do is doing a system recovery to get a working display again.
I did the BIOS update that I downloaded from the HP site as well. I currently have the Spyder software for screen calibration running.
HP support also recommended a "hard reset" of my windows installation, but since I just finished the complete installation of all programs I need, this is not what I really want.
In order to gain CUDA support for my nvidia 8400m gs video card, I downloaded the latest notebook driver from Nvidia website directly and installed it on my HP 2500t custom order laptop recently, so far, I have experienced frequent system hang, sudden blue screen of death, lost of display and system overheating. I am considering reverting back to HP stock video which is a bit old and has no support for CUDA.
Has anybody else tried the new nvidia video driver for notebook?
I change windows vista to xp to my hp dv6500 laptop i find all drivers except nvidia video driver , when i try to install the driver " Nvidia setup program couldnot locate any drivers that are compatible with your current hardware.setup will now exit" .
Hp pavilion dv6500
S/n: CNF7496BP3
P/N : GZ945EA#BV
Service Tag : dv6670ee
I need Wireless driver for windows 7 ultimate 32bit for Hp pavilion dv6 2164ee, i found driver on HP website but it is not working
View 3 Replies View RelatedThis is the last driver I have to load. Anyone know which driver to use or where I can find it? Its a g60-243dx. It has this card in it [url]
View 5 Replies View Related
