Im running Vista 32 on a 6710b and I want to install the latest X3100 driver from the Intel site, but it tells me the driver is not made for my laptop and to get the driver from the manufacture of the laptop. Ive seen this come up with a google search, but in every instance, there is no solution. Is there a way to install the latest drivers from Intel, or do I have to wait for HP to make them available on their site?
View 5 RepliesI bought a second hand M1330 on ebay with the intel graphics. I can't seem to get a driver installed no matter which one I use. I've tried both Vista and Windows 7 but in both cases when I'm trying to install the drivers, I get an error message saying
The computer does not meet the minimum requirements for installing the software.
Setup with exit.
I've tried both drivers from the intel site as well as the dell site but no luck. Any ideas?
Not long had this laptop and it can happen once every couple of days then not happen for a week or so.
The screen will go blue there is a heap of text and it locks up and crashes. The text is not on screen long enough to see what the fault is.
I have a Compaq 6710b that was given to me for work. My friend put a password on it that requires me write in before the computer will boot in order for me to log-in to my work account. I believe that this is called a BIOS or CMOS or a boot password. My friend said that it is for extra security. I know the password and have no problems getting past this point, but I do not want to have to enter this first password to get to where I log-in onto my work account. The computer was not like this when I got it and I do not want to take it to a tech at work and explain to him what my idiot friend did. The friend does not know how to change it back so that I do not have to enter this password.
View 3 Replies View RelatedI have a 6710b which just crapped out on me, the power jack died. I assume....that it was because of the charger (universal) that I got with the PC from a friend. I have a charger for my old laptop (Dell Inspiron 6000) and the plug fits into the 6710b, will this work or will it burn out my new 6710b (which is being taken care of via warranty) The specs of the charger are.....:
65W-AC ADAPTER
MODEL: HPOQ065B83 REV A01
INPUT: 100-240V - 50-60Hz 1.5A
OUTPUT: 19.5V---3.34A
Not sure on the power specs of the PC itself, hopefully this is where you guys could help me out. I'm really in a bind here and would like to avoid spending the 75+ dollars HP wants for a new charger. Not to mention, I've heard some bad things about the HP chargers for a while now.
I have an old HP Compaq 6710b laptop and I'm trying to get Minecraft running. It ran on windows 7 a few months ago but now I upgraded to Windows 8 and I have the latest video driver on Windows Update because I can't find the video driver for Windows 8, how to get Minecraft running?
I have the bought version of the game.
I also got it running on Ubuntu.
Minecraft log:
---- Minecraft Crash Report ----// I bet Cylons wouldn't have this problem.
Time: 4/26/14 1:36 PMDescription: Initializing game
org.lwjgl.LWJGLException: Pixel format not acceleratedat org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat(Native Method)at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:244)at
[code]....
I returned from a 2 week holiday to find that I could not logon to my laptop. During the time I was away the laptop was powered down. When I enter the correct password to logon I get: "The User Profile Service service failed the logon. User profile cannot be loaded." message. I tried powering the laptop for 3 hours then tried to logon again but without success. How do I get around this?
View 3 Replies View Relatedi know theres a clear difference, but does the 9400 clearly blow the x3100 out the water? also; i heard the white macbook was being discontinued. why do the new whitebooks not have a 2.4 processor. How much difference is 2.0/2.1ghz vs a 2.4? Why isn't there a 2.4 + 9400m option? is it a heating issue?
View 7 Replies View RelatedI have an Acer 5720Z with GMA X3100. The BIOS is very basic and there is no way to change the RAM size from there. So I would like to know if there are other ways to change the video RAM size from the default 8mb to the maximum 358mb
View 4 Replies View Relatedi got the black macbook, i was wondering how do i update drivers for the x3100?
View 4 Replies View RelatedI noticed 2 types of integrated video cards for the XPS 1330.
The 3100 vs. x3100
What's the difference?
I recently got an Aspire 5315 laptop and have been slowly getting it set up to run XP instead of Vista. However, the one problem I am having at the moment is with the Intel X3100 Graphics Accelerator. I have looked all over the internet and can't seem to find any info on how I can define the memory that is allocated to the card, it's all well and good the card using dynamic memory allocation but it's not allocating enough memory. I want to have a fixed 128MB dedicated to the graphics but I can't see any way of doing this either via the Intel software or the BIOS.
I thought I ought to be able to assign a minimum memory amount via the BIOS but graphics memory is locked on my BIOS setting. Would flashing to a later BIOS fix this?
Purolator left me a message saying my Dell laptop will arrive tomorrow morning. Ordered the Inspiron 13 on Sep 10th. Would I be able to run Counter Strike Source on high with Intel Graphics Media Accelerator X3100? I was able to run Fallout 3 on medium with GeForce 9500M GS. How does Intel X3100 compare to NVIDIA GeForce 9500M GS?
I don't play any computer games. Had Fallout 3 for PC when my Xbox 360 broke again. I'm not going to play any games with this new Inspiron 13, but still just wondering. I have a 16" Acer right now, I wanted a smaller laptop to carry around and faster CPU. I hope the T8300 does its job.
I just ordered a new Dell XPS M1330 with the Intel X3100 chipset and then I saw this:
http://sam.charrington.com/blog/one-...ernal-monitors
My question: Does it matter what graphics chipset I have? Can I run 2 external monitors with the Intel chipset? If so, that would be very cool!
I just bought an Acer-Notebook with the Mobile Intel Graphics Media Accelerator x3100.
I did not buy the notebook for playing games, but sometimes I just want to play. First it is all fine with World of Warcraft. Low FPS at all, but everything normal.
But when I am trying to run Warcraft with the notebook I get bluescreens. I know this have been discussed several times yet, but I can't get it running with the given hints.
First I did:
-opengl on shortcut (Bluescreen)
-swtnl on shortcut (Bluescreen)
Then I tried several drivers to run. The latest and some older drivers from the official Intel page.
Another hint is to install drivers of the version 14.33 or older. But I can't find anything like this. The links posted in some posts i found here didnt work and in the archieves of the Intel page are just newer drivers.
One of my mates has a dead M1330. I told him about the "oven" trick but his wife might hurt the both of us. It is however possible to replace the motherboard with the integrated X3100 motherboard correct?
View 10 Replies View RelatedI have an hp 8510w notebook and I just updated its graphic card driver for Nvidia FX 570M via Windows Update (dated 29.1.2009) because so far I had positive experiences with it. But not this time! Since I updated it the screen is not as bright as it was any more... It is actually so dark my eyes hurt when typing in Word for instance... and the brightness is on max
how to restore my previous driver.
i have hp pavilion dv6 1245dx in win 7 need to instal win xp when i instal xp on it .
pc show some error like full screen blue
i bought a dv3 series laptop, as usual it comes with crapware vista.
I downgraded it to windows xp without a problem. i am having lot of issues trying to install the drivers.
I loaded sp3, right after i installed windows. I downloaded the drivers from [Drivers] HP dv3, Compaq CQ35 / CQ36 (INTEL) most of the drivers installed fine, the problem i am getting is with the graphic card driver, nvidia refuses to install, saying that cannot find hardware configuration for your specific hardware type. for the sound i install the UAA update for sp3 which i found from [url] after i install the operating system finds audio on high speed blah blah, load the driver and when i restart the soundcard disappears. cant get my head around this. after installing most of this, i am left with 4-5 unknown device entries in device manager. cant figure out what is causing this.
The sound overlay keeps coming on every 2 seconds with the sound like its changing the volume, but it isnt. If i try using my finger it goes up and down maybe 2 bars then goes back to where it was stuck at after going mental for another 5 seconds. I can only change the volume using the taskbar icon, but the overlay keeps coming on. mute doesnt work, pause/play etc doesnt work, quickplay. You can imagine its incredibly annoying.
Is there a driver i can reinstall or something?
[url]
Its a vid file of the problem, when you see the bars going up and down, thats me trying to change the volume.
i have the hp dv5t-1000 CTO and here's my problem:
I cant figure out what driver i need to download to fix that. I think it's something to do with my USB ports, but that doesn't make any sense. thanks in advance!
edit: i tried to DL this:
JMicron Card Reader Driver
[url]
but it freezes in the installer everytime.
im missing a few drivers
device 1
FieldValue
Device Properties
Driver DescriptionPCI Data Acquisition and Signal Processing Controller
Hardware IDPCIVEN_8086&DEV_2932&SUBSYS_3602103C&REV_03
Location Information@system32driverspci.sys,#65536;PCI bus %1, device %2, function %3;(0,31,6)
PCI DevicePCI Data Acquisition and Signal Processing Controller [NoDB]
Device Resources
IRQ11
MemoryDC704000-DC704FFF
device 2
FieldValue
Device Properties
Driver DescriptionSM Bus Controller
Hardware IDPCIVEN_8086&DEV_2930&SUBSYS_3602103C&REV_03
Location Information@system32driverspci.sys,#65536;PCI bus %1, device %2, function %3;(0,31,3)
PCI DeviceSM Bus Controller [NoDB].........
I upgraded an old Compaq (1200Xl500) from WIN ME to XP not realizing this was a bad choice. Everything went okay except I lost my network adapter and PCMCIA which worked fine before the upgrade. No help from HP support and no drivers to download there either. I need a Texas Instruments PCI 1410 card bus controller. When I do a search I find links but nothing that works. Some links just refer me to Windows update? and there is nothing there either.
View 8 Replies View Relatedhad a pre-installed vista on my 6680ej and everything was fine, till i upgraded to windows 7. now i have an unknown device in device manager called Intel(R) ICH8M LPC Interface Controller - 2815 and i can't seem to find drivers for it.
View 5 Replies View RelatedI got a Dv9500 although the lid says its a Pavillion DV9000 and I am dying for the ethernet driver and the OHCI Compliant IEEE 1395 host controller drivers.
View 3 Replies View RelatedI've an HP 6510B and I don't know which is the sd/mmc card reader driver to download.
Actually the card readibility is not available under my system. I' ve installed win xp professional.
I acquired last week the above mentioned laptop for my wife. The use for it is basically browsing, shopping, skyping, messaging, searching over the net, no gaming.
To make it short and not to bother you with long stories: My brother gave me an original Ultimate Vista 64 with its own license and I'm planning to install it on this new laptop delivered with Premium 32 bits to fully use the 4 Gig Ram.
I've collected all the necessary drivers to proceed, but one, only one driver is giving me a major headache, the driver for the chipset Intel Cantiga PM45...I simply can't find it, neither on Intel's site...as if it never has existed.
Everest tell's me:
- Manufacturer: Quanta
- Chipset: Intel GM45/GM47/GS45/PM45 Yes (Intel Cantiga PM45) Montevina Platform
- Northbridge: Intel Cantiga PM45
- Southbridge: Intel 82801IM ICH9M
And here a screenshot with Cpuz
Maybe I don't even need that driver, but having built many xp desktops, I guess that there's no possible workaround without that driver...
my laptop is dv2500 and for e past 2 days, my display driver has been giving me a lot of problems.
at times, the screen would just go fuzzy and i won't be able to see anything so i have to power off my computer. at times, the screen goes totally blank and the computer restarts itself. when it does restart the screen stays blank and i have to shut down using alt+f4. at times i'll just get a BSOD for nvlddmkm error. and at times, the screen will go black and then return with the message "the display driver stopped responding and has recovered". the screen was fuzzy but i still did manage to make out that message.
i rolled back my driver to the default drivers that came with this laptop and after that, e screen has only gone blank once only to come back again totally alright 3 secs later with the same "display driver recovered" message.
this only started happening like 2-3 days ago but today it happened like atleast 5-6 times within 6 hrs. so i was wondering what's really the problem? i have searched around for people having this problem but their problem isn't as unique as mine. for them, it usually happens while playing games. for me it happens anytime, like during normal usage or whatever.
I have been able to install Windows XP on an HP DV5-1125NR and I have a problem with the following devices.
Network Adapters-
Atheros AR5007 802.11 b/g - System sees this device but places a "!" over it. Driver Detail shows:
PCIVen_168C&DEV_001C&SUBSYS_137A103C&REV_014&201108AE&0&0028
Other Devices-
Unknown Device - No idea what this is.
Driver Detail shows :
ACPIENE01004&15458EF3&0
System Devices-
HP Mobile Data Protection Sensor - Has a "!"
Driver Detail shows:
ACPIHPQ00043&2411E6FE&0
my dv6-2044ca (amd turion ii mobile dual core, 4gb ram, mobility radeon hd 4200), whenever i try to connect to a network and it fails, i have this thing sticking on my desktop wherever i go until i shut down the computer...
second question,
HP's display drivers (ati) are 8.635xxxxx and it's what i currently have.
however, at ATI's website, they have the 8.65 version..
what is recommended?
should i take the HP's drivers, but less updated? or should i take the gfx maker's updated drivers, but not from HP?
my friend has the 8.65 and it has "-ATI" at the end whereas i have the 8.635 and it has "-HP" at the end.