My DV2000 has a drscrete graphics so it comes with a 90W charger. I didn't notice the 65W charger is smaller by about 30% until comparing one to my friend's.
don't buy the cheap charger sold on ebay. They are VERY badly made. Louder than the laptop and only works intermittetly. I am waiting for the seller to respond for the return process.
I used to buy the sony Z's a couple of years ago and at the time they only offered slower small drives.
I could replace those with faster 7200RPM drives in larger sizes. Then when they started offering larger drives,
it was still cheaper to buy it with a stock 5400RPM drive and buy a larger 7200RPM drive seperately
I have a .iso file that is to large to go onto my FAT 32 HDD as it is more then 4GB in size.
What program can I use to split it into to files and then combine it on my other computer? The other computer is a windows machine.
what I can safely do with my new 17rse? I'd like to do something along the lines of putting a 32gb mSata (no option pre-purchase) as cache for my HDD but does this become pointless if I'd also like to add a larger 256gb SSD as a primary drive with OS on it?
View 9 Replies View RelatedI have a dv1000, the chargers i found online use a 18.5v charger, i have a 19v charger for another hp which can provide enough current to run it.
Will running at the higher voltage damage it?
I have a 6710b which just crapped out on me, the power jack died. I assume....that it was because of the charger (universal) that I got with the PC from a friend. I have a charger for my old laptop (Dell Inspiron 6000) and the plug fits into the 6710b, will this work or will it burn out my new 6710b (which is being taken care of via warranty) The specs of the charger are.....:
65W-AC ADAPTER
MODEL: HPOQ065B83 REV A01
INPUT: 100-240V - 50-60Hz 1.5A
OUTPUT: 19.5V---3.34A
Not sure on the power specs of the PC itself, hopefully this is where you guys could help me out. I'm really in a bind here and would like to avoid spending the 75+ dollars HP wants for a new charger. Not to mention, I've heard some bad things about the HP chargers for a while now.
I gained a lot of information from the 5315 CPU Upgrade Thread. I'd particularly like to thank BigOzone, Hoggie and Quilty997. There are many others but information from the above formed the basis of my upgrade.
Other information I've collected from other parts in the forum.
The specification of the laptop was as follows.
Acer Aspire 5315
Celeron 550 2.0Ghz (eek)
1gb of Ram
Vista Home Basic (double eek)
Atheros Wireless Card
80Gb Toshiba Hard Disk
The new Specification is.
Core2Duo T7500 2.2Ghz 800 Mhz Front Side Bus 4Mb Cache
3Gb of Crucial Ram
Vista Home Basic (No Choice At the Minute)
Intel 4965 AGN Wireless Card
200Gb Hitachi Hard Disk
The CPU Upgrade I won't actually cover, not necessary when there is a fantastic sticky at the top of this forum. The Upgrade took about 15 minutes, but the actual swap took about 5 minutes or so, I was very anal about cleaning the heatsink and applying AS5. I think the biggest scare was the door unerneath, quite tricky to get off and put back on without damaging the tabs.
My main focus is the hard drive swap, whilst maintaining all the eRecovery software. For this I use Acronis True Image Home, I am aware that the trial can be downloaded or users obtain by other means, can I just say BUY IT as it only cost me 17 from Amazon.co.uk and as usual it was cheaper in the US. The biggest reason for buying is that some features are not available in the trial. I also bought a Laptop SATA External Drive Holder and boy was I glad I did......................
I can barely touch my charger it is so hot, it is one of the new slimmer blocks. It is seriously hot and nowhere near the temperature of my friends Vaio block.
View 10 Replies View Relatedmy charger is making a weird crackling noise should i be worried...
View 4 Replies View Relatedwith an xps used my 9300 charger and now it wont power on anymore with her old charger. it would only bring her to the screen where it says...this is a different charger, even when she is now using her original charger. it was working before on battery, but now that her battery is discharged, it's not working.
View 12 Replies View RelatedI've had my D630 for over 1,5 years now and having grown tired of lugging the 65W PA-12 adapter to work and back, I'm thinking of buying an extra adapter, so the new one would stay stationary at home and the 65W one at work and on the move, if neccesary.
I know a safe bet would be the 90W PA-10 chunky brick but looking ahead (hint E6400), I'm thinking the E-series 90W flat brick would be a better choice. D and E series chargers voltages/amperages match but will the E series one work reliably?
Both choices can be had for the same money
Having great difficulty trying to find one that will plug into the cigerrette lighter socket in a car. Could really do with one as I spend quite a bit of time on the road, and being able to use the laptop would help kill time (obviously i wouldn't be driving whilst doing this )
View 10 Replies View RelatedThe charger for my Dell Precision M6300 has stopped working all of a sudden.
I haven't dropped it or anything, just doesn't seem to want to work
I liked the SR charger was nice and compact and was only those 2 pronged ones. and the Z is big and 3 pronged.
possible to buy a replacement one thats like the SR charger that would work on my Z
my dad just bougth and 6930 and the forgot the charger and i use my 8920 charger? are they compatible?
View 4 Replies View RelatedI came across this on eBay: [url]
I know it says that it is a Vaio P charger, but I was wondering if it would also work with the UX. The UX wall charger is rated for 16V 2.2A while this is 10.5V 1.9A. IMO it should work okay since the current does not exceed what the wall charger supplies. Am I correct in making this assumption?
dimensions and a photo of the charger for the latest Vaio Z series?
My old Vaio G11 was 82.5mm x 36mm x 25.5mm (or in inches 3.25" x 1.5" x 1") and I was hpoing that Sony would keep the same form factor/dimensions (or smaller!).
Also is the input one of those cloverleaf (3 pin) or a figure of eight (2 pin)?
my Vaio NR21M charger has just decided to stop working and Im in the market for a new one. I have spotted loads of cheap chargers on ebay etc, but Im afraid theyll wreck my battery. Have been offered a genuine sony one, but the model number is slightly different,
The original part number is VGP-AC19V28 and Iv been offered a VGP-AC19V14. What is the difference? What does the V number mean? I ca only find VGP-AC19V30 and VGP-AC19V31 on the sony website and there is no compatability chart I can find, and I certainly dont want to buy one thats not going to work on my computer.
Dell doesn't have this, but are there any good third part solutions. I guess the reason Dell doesn't have it is that the computer demands a rather hefty PSU, but still...
View 9 Replies View RelatedI have a Dell Latitude E6400 which uses Dell's 90w Charger PA-10 which is a 90w 4.62A and 19.5V.
I have been looking for a second power supply, but before I drop the money on a new one. I also have an old Inspiron which uses a the 130w Dell Charger, it is a 6.7A power supply, and the same 19.5V as my Latitude Charger.
Could I use this charger with my Latitude without causing damage? I am just a little concerned about the Amperage being higher than my current charger.
My battery charger doesn't charge and the blue light isn't turning on.
Is it safe to assume that it is dead?
Are there any tests I can do to verify if that's the case?
I've had it for a year and 3 months, is that the typical life of a battery charger?
Hoping for some insight.
I have a 90w Dell charger that came with my studio XPS 13 (6 cell).
If I was to use this charger on a 3 cell Dell Inspiron Mini 12, can this seriously damage the 3-cell battery, or are the chargers smart enough to know what type of battery they're charging?
I was just wondering if someone could help me solve a power problem with my laptop. I have an old Latitude Cpi laptop which stopped working when the AC charger is plugged in.
If I remove the charger, the laptop boot up without problem, but when I connect it back again it will stop imediately.
The LED on the charger stays on green steadily, so I suppose it's a problem on the motherboard. Removing the battery and using another AC charger didn't help neither.
I own a wonderful 1810TZ, which is a great machine. However, the extremely slow speed at which the battery charges greatly reduces its usefulness for me.
Is it possible to get a faster charger that will not toast my computer and/or me?
Recently, my adapter just stopped working. I went to my local computer service shop, they said that there is a cut in my cable.
So I asked them is there any replacement for it, and they showed me this charger where the Output is 19V, 3.4A (Inputs are similar).
On the back of my laptop, it says the Input is 19V, 4.74A. (I'm sure you guys are too).
So out of my curiosity, will the charger they offered me be compatible with my laptop? As I don't want my laptop to be damaged due to wrong charger.
About three weeks ago, I came in to the machine to begin my day. The machine had been plugged and charging through the night, status=Hibernated. This is my common practice. I immediately noted the Charger light on the hinge was blinking alternately white then three or four quick red blinks rather than the usual steady white when the charger is plugged in.
I interpreted it as some sort of alarm; but after an exhaustive look, running diagnostics, searching DELL website and viewing the User manuals, I cannot find an answer.
· I checked the Windows 7 battery app and the DELL Battery Meter and “Battery Health” showed the battery to be performing normally.
· I went to DELL support and ran the battery diagnostics which were OK.
· The problem is seen always several hours of charging with no activity; and it is intermittent. It has happened several times since the first time. It happened again this morning.
· I made the assumption that the red light was a warning and the battery was failing or in trouble – no.
· Then I thought it might be due to overcharging. If so, shouldn’t the problem be every time I leave it on overnight?
· Note my solution: If I unplug the machine and go on battery power when the red light is blinking and do work on the machine, when the battery goes down 10% or so, the red blinking light stops.
· My machine is otherwise working well.
The probleme is that when i plug the charger into the wall, there is a green light on the charger. As soon I plug the charger into the laptop, nothing is happening (+) plus its flicking off the light on the charger
I tried several DELL charger and it did all the same senario.
I've got a Vostro 1500 and the specs for Dell's charger/adapter can be found here: http://support.dell.com/support/edoc...html/specs.htm
Dell's charger: 90W, 19.5V, 4.62A
Is it ok if I use a 90W, 19.5V, 3.34A charger instead? I'm using it right now, charger getting hot though. What do you think? Is it safe to continue using this charger with lower amp rating?
Do you have to send the defective one in? If so, I'm not going to bother with getting a replacement.
View 13 Replies View RelatedMy Dell XPS M1530 just shut down on me. When I plug the charger into the laptop, the green light on the charger turns off, just like it wasn't plugged into the wall outlet.
I tried a second charger, and the light on that one just blinks in rapid succession. I've tried booting it up without the battery and with a replacement battery with the same results.
So now my laptop can't start up and I'm not sure what's going on.