HP Compaq Nx6330 Display :: Gray Vertical Lines On External Monitor
Dec 14, 2014
I have an hp compaq nx6330 (ex856av) using windows xp. last may, the screen turned black (i was told i need to replace the lcd), so i decided to use a generic external monitor. a couple of months ago, i had to have it repaired and the repair guy said he'll upgrade the OS to windows 7. things were working fine for about a month then the screen (external monitor, since the laptop screen is dead) starting having vertical gey lines (the entire screen). i played with the resolution and i was able to get rid ofthe lines a couple of times. are the lines due to using windows7? can this particular model handle any OS besides the one (windows xp) it came with?
I have encountered vertical lines on the lower half of my screen and it is always there. When you reboot, it comes up right away. I read where someone else had the same problem and it would come and go at will..
I have a pavilion dv6, working perfectly till I closed the lid ( probably a bit too hard :/ ) and then when I opened the lid these vertical white, red and green lines are there. And a black stripe at the bottom of the display. Also horizontal grey bars covering the start button completely.
I have a dell Inspiron n5010 laptop and use it for personal works and photo editing as a photographer. when I watch a picture, in some specific zoom levels there are weird vertical and horizontal lines witch create many regular squares in the picture. it's not matter what software display it for me (it happens in every photo browsers I have and even in firefox) here you can see them (this picture is taken by Prntscr Button):
here you can see that little squares witch is annoying for me as a photographer! these squares goes away if i zoom in more! but some times squares are bigger like this: (same photo) as you can see it looks like some sort of distortion! and here you can see the same photo when it is displayed normally: my own guess is some sort of GPU problem!what I should do to get rid of these squares? some of my laptop specs are as follow: Dell Inspiron 15 (N5010) Laptop CPU: intel core i5 2.8
My Dell XPS 15z model laptop display screen is suddenly turning to noising with vertical and horizontal scattered color lines. This is happening every 15 to 30 min and when the mouse cursor is activating after automatically resuming the screen normally.
I have connected my monitor to an external monitor. It works fine. Only problem I have ( and a little irritating one) is that the external monitor picks up display only after Windows is loaded. Pre-OS screens like BIOS settings, GRUB loader (I have Installed Linux ) doesn't show up)
Is this an issue with BIOS? Because, when I connect HP dv6000 to my monitor, I can see the BIOS screen as well. I am sure the problem is not with the monitor.
The BIOS is responsible for detecting displays before the OS is loaded right? I checked BIOS settings and there is nothing to indicate the display ports/devices (however, this page on HP website shows a BIOS screen "Advanced" which apparently has those settings)
I just bought a dv6-2190us and I love the laptop but the screen quality is horrible.
In white areas of the screen, instead of the display being pure white, it is grainy instead, with very faint vertical lines running up and down the screen, becoming more noticable as the viewing angle changes vertically. This drives me crazy as I work with text for a living and screen quality is critical to me.
The screen quality of $399 Compaq CQ60 is head and shoulders above this.
I've tried calibrating the screen, verifying that it's in native resolution, etc, etc to no avail.
I dont think the problem is isolated to my laptop because I checked some other dv6's at bestbuy and saw the same problem.
i have a Hp laptop and The problem is that i just turned on my computer few week ago a Yellow line vertically ran down my screen,i knew it was something bad but now i have 3 and its becoming a problem...
I have a Presario V6000 and i love it, but just recently ive started to get vertical lines on my LCD. so far there are 4 groups, maybe 3-4 pixles wide that run the length of the monitor. I've priced out new monitors at around $100, but my concern is: is it the LCD going bad or is it the signal cable?
My friend brought his laptop over and I'm trying to help him sort everything out. I think the problem might be due do a dying graphics card or bad memory.
Basically on the load up screen for Windows, there are groups of white dotted vertical lines spread evenly across the screen. This also happens when in CMOS. Everything seems fine on the desktop in safe mode, so I'm not sure whats wrong.
Here's an example... I used MS paint to make a picture to emulate the problem.
The monitor on my HP Pavilion dv9830us laptop has not been working for some time and I have had to use an external CRT monitor for my display. A couple nights ago, my operating system (Ubuntu Linux 10.04) failed to load and because I can't get video feed to my external monitor until the video drivers on Ubuntu loads, I am unable to run Ubuntu's repair feature and the beginning of boot.
Is there a way I can get my laptop to use my external monitor at all times, even at the BIOS screen? Is there a setting in BIOS for this?
i dissasembled my presario cq60 and when i put it together the monitor won't activate.
i tried using an external monitor and the monitor refused to turn on from standby, a safety feature of the monitor. the small card in the underneath with 2 wires leading 2 the monitor, (i assume that is the laptop version of a graphics card) is fine, inserted properly, and i had a slight issue with the plugs fitting, but that was soon resolved.
I have a HP zd8000 laptop. It has what looks like one yellow line and one blue line on the right side of the screen that run vertically. Sometimes when I move the monitor it also flickers but usually only when I physically move the screen. How do I get the lines to go away or is my monitor going bad?
I was getting frustrated with my external monitor because the screen color was turning dark purplish at times, so I went into Device Manager and deleted both default monitor entries instead of just one under Monitors in hopes that it would've gotten rid of the purple haze so to speak.
I tried unhooking the monitor and unplugging everything before I deleted the default monitor entries in Device Manager, but it didn't get rid of the purple screen.
I have a fairly old notebook Dell Inspiron 4000 with WinMe installed and the display is no longer working assumed due to a bad or broken LCD, which is why I'm using the external monitor.
The external monitor has been working fine for months until it started turning purple on me when it was being used with the notebook. When the monitor is hooked up with my desktop, the screen color is just fine.
The notebook has got a lot of storage on it. During the boot process on the notebook, the external monitor lights up at one point (no longer purplish), but goes blank/dark after a few seconds and says it no longer is getting a signal from the notebook
I just got an HP Envy, 17 inch, and I have an HP 25 inch monitor I would like to connect to it. It has the "old style" connector which was supported on my old HP Entertainment Notebook. Not on the new one! What kind of adaptor do I need to get? I do have an HDMI port on the left side of my laptop. Do I need just a regular HDMI cable?
my resolution on my external monitor wont display correction when hook up with the XPS 1647.
The connection is HDMI. Resolution has been set to the highest recommend 1920x1080.
If you look at the picture below, the edges of the screen won't fill up the whole screen, making everything so small and hard to read. I already turn off the display on the laptop, making the monitor as my default screen.
On my previous XPS M1530, the Nvidia 8600GT can display the resolution correction.. I find it hard to believe that ATI card are not capable of doing that or there might be something wrong with my setting
I cannot connect my Probook 4430s to external monitor. I also have problems on the following device drivers. Are theDo I y related? need to download a new driver? What to download?All I want is to be able to use a larger monitor.
I have a brand new HP Envy X2 (15-C001dx) with Windows 8.1. So far it works fine by itself. I tried connecting an external monitor to the laptop using an HDMI cable from the laptop to an LG L246WPQ display. The problem is that 10-15% of the left side of the laptop screen content does not appear on the external monitor. Missing from the external monitor is the word "Start" in the upper left corner along with roughly the 2 leftmost columns of tiles. This occurs in both "Duplicate display" or "Only display on screen 2" modes. This is using a resolution of 1680x1050 which both the laptop and the LG appear to support. Using the touch screen on the laptop I can scroll the tiles to the right and see the missing leftmost columns. The information that is displayed on the external monitor begins as far left as that monitor will display. In other words, there is no black/blank area on the left. Except for the missing information on the left side, the content of the rest of the external monitor looks fine. I updated the laptop's video driver to the latest on HP.COM. No change in behavior. I tried every option I could find on the LG OnScreenDisplay, but nothing made the display any better.
I have MacBook Pro (late 2008) and I have WinXP installed in Bootcamp.
Recently I acquired a Dell SP2309W monitor that is capable of 2048 x 1152 resolution. When hooked to my MBP and start in WinXP, the external monitor works fine in EXTENDED mode. That is, I can move Windows to the external monitor. The MBP display is the primary display, where the Taskbar is displayed.
What I want to do is make the external monitor my PRIMARY display, with the taskbar shown there. However, the "Use this device as the primary monitor" is greyed out.
(HP 2000 Notebook PC / Windows 8.1, 64 Bit) Blank screen always, external monitor works fine. What components could be malfunctioning? This occured about six months ago, approximately one week after the one year warranty expired.
I have a HP Pavilion dv4t-4200 CTO Entertainment Notebook PC model # A1M02AV and it has a VGA port, one that looks like a phone/broadband cable port, and one that looks like a USB port but indented on either side at the bottom. Can I even connect an external monitor? How do I find out if I have more than 1 video card? Besides the usual USB/headphone ports, I don't have any other ports. It says my drivers are up to date...but I don't even know what I should be looking for. Do I need to install something or buy some sort of adapter?
I am trying to connect a Dell external montitor via the VGA port with a VGA cable. The monitor has power but my notebook does not recognize/detect it. However, when I first plugged it in, my notebook display shrank into a square (vs the whole screen) so it recognized something...but nothing happened on the external monitor.
I tried detecting it via my display settings, but I accidentally changed some dispaly setting so that the home desktop only shows on monitor 1, but unselected my actual notebook display or something or changed it to be monitor 2 (even though monitor 1 does not exist), so when I plug the cable in to my notebook, all of a sudden my desktop goes away and it's a just a blank background screen - and I cannot access the computer display settings or anything.... when the cable is unplugged this setting looks normal, so I can't figure out how to fix it.
I discovered that my display wasn't turning on yesterday when I tried turning on my notebook. Luckily I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I really cannot be restricted to my living room or office to use my laptop.
I have hp g61 for a while, i have been maintaining really good till recent my screen went BLACK.. it was acting funny before as it stays ON after i turn of the laptop... and now it is all back cant see nothing ... the laptop works fine when i connect to external monitor..
We have several 8460p with the same issue. They work fine until you try to connect an external monitor/TV/projector and then the trouble begins.
When using Fn+F4 to establish a dual screen output the external monitor and the built in screen switches between the two as if the PC can not determine the screen to use. On rare occasions it works but it is not reliable. I´ve first encountered this on a fair and when I tried it before the session it worked well. During the session it just started this behaviour. I took it out and replaced the graphic drivers, the BIOS and made sure the resolution was not the issue. It worked well and I returned it to the lecturing room and it started again.
I started to believe the projector was the bad part here so I did not try to use the PC again on that fair but no other computer showed any sign of trouble.
Since then, this was early this spring, I´ve seen and experienced the same problem with several computers of the same type and with different monitor and they all behave the same way.
I have spent some time now and searched the web but nothing I´ve found does explain anything around this and so far no driver update and no other update (including a full installation) has solved this.
The computer are the HP Elitebook 8460p with AMD-graphics.
There are not any other indication of that something is wrong in logs or anything.
My laptop was working correctly and then I booted up one day, the bios worked fine but then the screen went black. I connected an external monitor to the lap-top and the laptop display works fine. As soon as I remove the external monitor, again, I get a black screen on my lap-top.
I have run the full system option of the Dell diagnostics and have 2 errors, battery and dvd flash rom. I have ordered a new battery. I have also noticed that my lap-top does appear to get quite hot.
Tried (and sometimes successful) to connect HDTV to laptop, Inspiron 5720. Now laptop screen does not display (goes black) without an external monitor physically attached. Tried using Projects and clicking on single laptop display, but if I disconnect the external monitor, the laptop screen just goes black. Not very portable if I have to lug around a second display.