HP Pavilion Dv6 Networking :: New Hard Drive With Windows 7 - Wireless Not Working
May 30, 2014
I had to install a new hard drive and re-install windows 7 on my Pavilion dv6. I downloaded drivers for LAN card and can get on internet with wire connected. When I installed wireless drivers I get compatibility box that says drivers did not install properly. Net work controller shows no driver installed. I am running windows 7...
my laptop is Pavilion g6 Notebook PCafter i installed windows 7 i noticed that wireless not working when i press on the button its idle .. nothing happensi know i must install a driver but i realy dont know what is the right driver for my laptop
I will start out with my laptop's system information (and I am typing this on a cell phone)It is an HP Pavilion dv6 Notebook PC with product number - B3K21PA#ABG. Serial number is 2CE2201C96. I have a Broadcom 4313GN 802.11b/g/n 1x1 Wi-Fi Adapter according to my device manager. I have recently changed my ISP and the wireless router they have provided is the Linksys E1200 model.Now, on to the problem - after a prolonged internet use (skype call or playing internet games) my laptop just stops giving me access to the internet.
And I say it like that because the internet connection icon shows that I have network access and internet connection but none of my software or browsers are able to connect to the internet. I have tried updating the driver (both by checking driver updates and by downloading the drivers manually). I have also tried system restores and everything else I could think of, short of actually doing a factory reset on the entire thing. And I should also mention - although this issue has occurred several times now since I changed ISP (and yes, I called them about it too), this current time seems to be permanent since it has been hours and it is still not working.
I am reloading my laptop and have downloaded all the wireless drivers listed on the HP support site for my machine. None of them are working for my wireless. I am running Win 7 32bit. Is there some other place I should be looking?
I get a red X over the internet icon and my router will no longer recognize any networks. I called my ISP and the manufactuer of my Belkin router. So I went out and rought a brand new Net Gear router. Still not working. I called Net Gear and they think it's my wireless card?
Is there a way to determine for sure if its a hardware problem? Maybe I need to download a driver?
Is there a wireless switch on my laptop? Do I need to configure my new router? I'm hoping to use my Belkin router if it's just a driver problem so I can take back the new router and get my money back.
I have a HP ENVY TouchSmart 14t-k000 CTO Ultrabook. It just went out of warranty a month or so ago but started blue-screening rigth after that - I had to reinstall Windows 8.1.
Since the install, my wifi has not been working properly. (I can use an Ethernet cable without a problem.) Sometimes it will say the wifi is connected with full bars, but then I get a "DNS_PROBE_FINISHED_NO_INTERNET" when I try to pull up any browser and nothing will load. Other times it just won't connect at all. The weird thing is that 5% of the time it will work fine, and I'll be able to use wifi no problem for a couple hours at a time.
What could possibly be going on? Is it a driver issue? Should I get a new network adapter? Is it a settings issue?
I have a HP 630 laptop with Windows 7 64 bit ultimate . After formatting the hard drive of the computer, I reinstalled Windows 7 64 bit Ultimate.
Now it can't connect to the internet through wireless. I've tried all the basics: pressing the WIFI enable/disable toggle key on my keyboard, restarting my computer, enabling disabling the internet connection in the network area, etc.
Under Device Manager I see 2 devices related to the wireless internet:
1. Other devices > Network Controller - it has a yellow warning sign next to it - the error is for having no drivers installed. 2. Network adapters > Realtek PCIe FE Family Controller - "This device is working properly."
Below are the hardware ID's for the network controller that is not working:
I have an HP Pavilion m6 running Windows 7 Home Premium.
My workplace installed a router a few months ago. It's a Cisco E2000. My laptop will not recognize the wireless signal from the router. It recognizes about 10 other wireless signals from other locations outside the office. My phone also recognizes the router and can connect to it no problem. I've installed all the updates for Windows 7 and for the HP laptop. I've also installed the latest driver for the wifi card in the laptop.
I bought new HP laptop, which is "HP Pavilion 15-p031tx Notebook PC Drivers" and at first as a default, Windows 8.1 single language, which was not activated, was in my laptop. Then because I wanted to use windows 8 feature, I downgraded to windows 8 pro through dream spark. After that, I realized that I cannot connect into internet and saw the computer manager, there are no network drivers in my laptop!
So now I would like to download the wifi adaptor driver for windows 8 pro. But I could not find how and where.
Hardware Ids of Network Controller Properties in my laptop are PCIVEN_14E4&DEV_4365&SUBSYS_2230103C&REV_01 PCIVEN_14E4&DEV_4365&SUBSYS_2230103C PCIVEN_14E4&DEV_4365&CC_028000 PCIVEN_14E4&DEV_4365&CC_0280
I am having trouble with my wireless button, it remains red/orange despite touching it and restarting my laptop several times. My laptop is an HP Pavilion DV7=1135NR, it is originally installed with Windows Vista 64bit. However, i have it reformatted and change the OS to Windows7 Ultimate (32bit). And now i the wireless button wont turn blue. And also the wireless button located in the taskbar is no longer there.
Some additional background: The same problem (wireless wont turn blue) had been recurring before i had it reformatted but then i seek assistance then to HP customer assistant, and installed atheros. the problem had fixed for a while and the same problem would recur. However, i can turn it blue once i restart the laptop or when the "WLAN disabled" message would appear in the task bar and i would immediately touch the wireless button.
i tried downloading a driver from HP but still not working. right now i am connected via ethernet cable and its such an incovenience.
I have a HP Pavilion g7-1205ev laptop with Windows 7 64 bit Home Premium. I bought a new hard drive so I had to install Windows again. After the installation the laptop can't connect to the internet either by wifi either by Ethernet. After trying troubleshooting it says that windows did not detect a properly installed network adapter.
At the device Manager I can see that there is an exclamation mark to these exact components:
Standard VGA Graphics Adapter BCM20702AO Ethernet Controller Network Controller PCI Device PCI Simple Communications Controller SM Bus Controller
Can I download all these from somewhere ? And of course I will download them to another PC as my laptop doesn't go online at all. I also tried to run Ubuntu from a flash drive on my laptop and the Ubuntu uses the Internet just fine.
My Bluetooth is not working since I update to Windows 8.1. I tried everything. Not working. Driver error. I test through a driver scanner. It days I needed Ralink Bluetooth PCIe Adapter version 188.8.131.52 .. Where can I get it?
I have HP Pavilion g6-2206tx Notebook PC which was running windows 8(64-bit).
Recently I updated to windows 8.1 . All things are fine after the update i.e., all the hardware and software are working properly expect bluetooth . bluetooth is not working & i tried all the ways to run it.
It seems that there is no bluetooth hardware in my laptop . I contacted hp also & they gave me 1 update and it also won't work.
I just bought "HP Pavilion 15 Notebook PC p000su-j2t31ea", installed windows 8.1, downloaded drivers and it seems like it works perfectly but wifi.
When I tried to install this Broadcom WLAN driver [URL]... its loading like on the half way on its instalation and drops then a message appears and asks me if the program worked well.
Ive tried to install that driver under Safe Mode and it loaded the installation, but when it was installing some error came out saying that the installation cant continue, because update.cpp 1205 is not found or something.I also tried to find the driver from broadcom's site, but couldnt find it. And now i can use e-net only via cable.
I have a Pavilion M6 1045DX laptop and the HD crashed. It was 750GB so off to eBay I went to buy another one. I decided to buy a NEW SEALED HD so I bought a blue label WD brand new. (March 2014) Just for grins I wiped and verified the drive and it passed. I temporarily installed a 40GB hard drive to build the machine while I was waiting for the new drive figuring I would just clone it when it arrived. When I went to clone the test drive to the new drive I received an error about block sizes. I use the Apricorn DriveWire and have seen this on a rare occasion. I thought maybe a different cloning software would work but to no avail. Same error.
Rather than fight with it I decide to put the new 750 drive in the laptop and build it all over again. This is when I received this error.“Windows setup could not configure Windows to run on this computer's hardware”So, I grabbed another blue label 160GB WD drive and it installed Win 7 fine on the laptop. I then took the 750GB drive and installed in on an old IBM T61 and it too installed fine. I also installed the new 750GB drive on a Dell inspirion N5040 laptop with complete success. Why the new 750GB WD drive gives me this error on "only" the HP Pavilion M6? This laptop doesn’t have RAID and was NOT Built for windows 8. It came with Windows 7. And yes I’ve reset the bios back to factor standards!
I have an HP Pavillion dv6000 notebook with a hard drive that is partitioned. One partition contains the recovery program, which will install Windows XP should I ever need it to do so. I have recently installed Windows 7 on the other partition, and believe it would make sense to install Windows 7 on the recovery partition, so that if it is ever needed, it would reinstall Windows 7 rather than Windows XP. How can I accomplish this?
My wireless button will not light up blue. Pressing it only switches airplane mode on and off. I tried a hard reset and it didn't work. I have a HP Envy TS 17 Notebook. Product number is E8A11UA#ABA. How to solve this?
Yesterday i purchased hp notebook Model # 15-d018TU, Product: F7P99PA#UUF, then installed windows 7 (64-Bit). Everything else seems to be working fine except the internet. When i open network and sharing centerto set up a new connection, it says "Windows did not detect any networking hardware". Also the drivers for Bluetooth controller, Ethernet controller, Network controller, PCI Simple communication controller, SM Bus controller and USB controller are not updated, and i can't update them as a i don't have any internet access.
I just got my Dell Outlet Latitude E6500, and I can't seem to get the wireless network running sometimes.
When I had the computer on battery, it somehow connected to my router, but when I later plugged it in, it wouldn't connect. No idea what's going on, but I did get a message that said the Dell Wireless card was not connected ("hardware disconnected")
Is this an issue b/c I bought it refurbished, or would I have faced this with a brand new computer too?
Separately, I didn't realize how large this computer is. Makes me think that perhaps I should return it and get a 14". Not sure yet what to do.
today I bought Hp14-d106tx and I install Windows 8.There was no driver DVD in the package, so I downloaded from URL...Everything goes well, except the wireless driver,There are 2 drivers for wireless, and they I installed them and, show below,
sp65029 - shows "sp65029.exe has stopped working" sp65428 - shows "This app can't run on your PC"
These are official driver downloaded from HP website itself doesn't work, where else should I find it?I installed touchpad driver already, but can't find the way to automatically disable it when usb mouse is connected.