I can't change my monitor's resolution and the screen brightness after I upgrade the windows from windows 7 ultimate to windows 8.1 pro build 9600I've already installed graphic card , but i can't change my resolution more than 1024x768 My laptop is HP 431 with intel core i3-2310m CPU @ 2.10 GHz , AMD Graphics HD 7450M , DDR3 1 GB (i don't know why , but i've already installed AMD Graphics HD 7400M Series because my notebook isn't compatible with other AMD Graphics) , OS 64-bit
I m using HP Pavillion N208TX with windows 8.1 64 bit version. i m not able to adjust screen brightness from f2 and f3 button and from the power setting also. when i press these buttons it shows the slider to adjust the brightness on top left corner of the screen but its does not adjust the brightness from low to high. i have already updated the Intel HD Graphic driver...
I have HP Pavilion G6-1305sx notebook with screen brightness control issue. The f2 and f3 keys (for brightness control) do not work . I've tried through control panel, but still cannot.The light on the screen is too bright for my eyes.
I have a Pavilion dv6-6173cl laptop. It's been working fine until recently, when I left it on overnight to finish downloading a huge file. When I tried to adjust the brightness the next morning, I couldn't (though it was still at full brightness like I always keep it). So I thought, "why not reboot it?" I rebooted and now the display is the dimmest it can get with no way of adjusting the brightness using the brightness keys, control panel, or otherwise.
This has happened before. When it did, I did a factory reset on it and it fixed the problem. However, although there is no absolutely critical data on there and I can always make a backup, I prefer to not have to go through all that if it's avoidable. I have an external display that HP asked me to connect it to to see if it was a hardware or software issue. The external display was at full brightness, so when they asked me to ship it in I did a factory reset and that solved the problem. And now it's back.
I am using windows 7 professional 64 bit, on 15 r014tu notebook.
In my system Screen brightness is not getting changed using F2 F3 Keys since i bought notebook, Im not even finding slider in control panel->Hardware and sound-> Power options->change plan settings.BIOS Version is: Insyde F.14, 3/19/2014.
Also I need below drivers:Intel HD graphics VGA:PCIVEN_8086&DEV_0A16
I just bought HP 14-g003AU Notebook PC.. but i have stucked to adjust screen brightness.. I installed Windows 7 64 bit OS..
My adjust screen brightness is missing.. I have tried to download VGA driver (AMD Catalyst). But it doesn't work either..
Uninstall Generic PnP Driver Moniter and install again.. not work Uninstall Standard VGA Graphic Adapter.. and install again.. not work.. Try to update automatically Display adapter.. not work.. Update Windows 7.. Not work Reformat OS.. not work. Update LAtest BIOS.. not work ..
The previous user set login on a fingerprint, forgot the password. I managed to enter as a result after the long operation myself, as the administrator, to set the password, to set an input both according to the password and on a fingerprint.
But, I want to disconnect all this horror absolutely. Also I don't understand as it to make. I can enter BIOS, but the majority of points thus is unavailable.
I cannot adjust the brightness of my display using the Fn keys or the Control Panel... I have already had to replace my battery once... I need to be able to adjust the brightness in order save my battery life!
I changed my operating system from WINDOWS 7 ULTIMATE 32 BIT TO WINDOWS 7 ULTIMATE 64 BIT,and the problem is after changing OS my laptop is not displaying Brightness bar. Brightness is increasing and decreasing but it is not showing bright bar.
Any driver i have to install ? if required then driver download link.
My screen gets black when I start windows 7 on my Hp Paviliom Dm1 Notebook. Also I connected my pc to an external monitor through VGA cable and then I can see the windows operating system in the external monitor . I did a start-up test and then I got these results:
I updated the BIOS to 2.26 a while ago and ever since then there's no on-screen indication of caps lock on/off, screen brightness or volume when I change it. Since it seemed to be affected by BIOS, I updated again to 2.27 just now, but the problem persists. I needed to update the Hotkeys Feature Integration by downloading the utility thingy from this page. Probably wasn't a BIOS thing after all.
I can't change my laptop brightness neither with F2 and F3 keys nor in the settings. I have already updated all my drivers but still have no response when adjusting brightness. I have an hp pavilion sleekbook 15-b102sp
Since my laptop (dv6 pavilion 7090el) had to be formatted to another copy of windows 7 (64bit), i can't manage to make hotkeys for brightness(f2-f3)/volume(f9-f10).
I tried to install/uninstall/install HP quick launch software (with all the system restarting combos possible) and the software doesn't really seem to be installed, since it only appears in the Control panel but not anywhere else.
The BIOS "action key" option in System configuration is already "enabled" ....
The brightness control keys (f2 & f3) on my pavilion dm4 stopped working all of a sudden. I'm operating windows 7 64bit. I've tried reverting to previous system restore points. I've also installed the BIOS, Intel chipset, and graphics drivers. All the other function keys are working properly, just can't change the brightness. Right now it's stuck on the brightest setting. I'm getting terrible eye strain from the screen.
I have a HP Pavilion g7-2325sb running Windows 7 64 bit. but the buttons for adjusting screen brightness don't work.The buttons for audio adjustment do work without pusshing the fn button.In bios "action keys mode" is enabled.I think it's some software missing but can't find the software, neither can "HP support assistant".
This is third time the same thing is happening to me. After i install some updates, display dimms, and background light became darker. When i restart computer, and enter BIOS, or if i am just looking at the screen before i log on to windows, backlight is normal.
My laptop shows me a blank screen after the windows bar loading screen. It did an automatic test on my hard drive to fix files, but when I restarted, it still would keep doing this test. I've tried to use a Windows Vista Upgrade/Recovery, but there is no backup and it keeps giving me an error on all types of restoration. I have just tried the Hard Disk Self Test and it says that there is an error #1 - 04 Fail. From what I've read in the forums, I will likely have to replace the hard drive, but how to recover the files from the old drive and what kind of drive I need to replace.
Problem: I have just installed Windows 7 professional, after installing all drivers (bios, video, audio, touchpad etc - all standard drivers) there are no bar appearing when i press F9-F10 (volume bar) and F2-F3 (broghtness bar) - there were bars before for sure (volume bar with Beats icon and bar itself). Functionally it works, but no visual appearing.
Also, if you are watching a video on YouTube and pressing volume up and down on keypad (F9-F10)- the volume is changing, but the indication under video itself is freezing.
I have tried many times to reinstall audio driver but it doesnt solve the problem.