Computer = HP Probook 4510S
Operating system Windows 7 professional 32bit
I press esc with startup and then F10 to change bios setting. It only allows me to change date and time setting or restore default settings. I need to enable hardware virtualization to be able to run XP mode....
Upgraded from Windows XP to Windows 7.
New laptop-HP Probook 4510s.
Problem- How can I still use my Panisonic KX P2123 printer with new laptop.
The GT20L DVDRAM Drive in my Probook 4510S is not detecting audio CD's or software CD's but it does seem to run video DVD's OK.
I have tried the Microsoft Fixit tool, which says there is a problem but it can't fix it.
II have checked the registry for upper & lower filters but there are no filter entries in HKEY_LOCAL_MACHINESYSTEMCurrenControlSetControlClass(4D36E965-E325-11CE-BFC1-08002BE10318.
I have tried creating a registry subkey.
All above is as directed at support.microsoft.com/kb/314060/en-us.
I have uninstalled the driver, removed the drive, refitted the drive and allowed auto-detection and installation of the drive, all to no avail.
I have, of course, tried updating the driver but each time the system says that the best driver is already installed.
I forgot my dell inspiron 1440 laptop BIOS admin password so i can not change bios settings. reset my bios admin password
View 4 Replies View RelatedI have a Probook 4710s with WIndows 7 64-bit. I tried to overclock it, but its seems I can't acess that ''configuration'' page.. I just get to press the F10 key to acess the startup menu, and then BIOS configuration, where I can just toggle some actions etc.. no overclocking there..Is it even overclockable?
View 1 Replies View RelatedLaptop: Hp ProBook 4510s
When I turn my laptop on, the blue light on the power on button lights for 6 seconds, meanwhile the led near the power plug on right side rapidly blinks 13 times. Always exactly 13 times, so it must be some kind of error code. Then laptop shuts down. Nothing is heard, neither fan, neither hard disk.
I just flashed BIOS on my thinkpad yoga 20CD00B1US. I got the lates BIOS 1.18/1,09 and sice this flash, I cannot make any changes in BIOS. I can list in BIOS but cannot highlite and change any setting expect quick boot Enabled/Disabled
My even manager is reporting me this warrining: : The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the operating system. This data will be ignored. No further action is necessary; however, you should check with your computer manufacturer for an upgraded BIOS.
I do have set up supervisor password for BIOS, password on power on. When going in BIOS, I am not asked to put password in, which could be the issue.
I have a pavilion touchsmart 15 - n263sa, my problem is that id like to change the bios settings but they are all disabled apart from date and time, I cant access the options I want to.
View 3 Replies View RelatedI'm using a lenovo thinkpad edge e530.
I have a problem changing my BIOS settings after installing win8.1 and enabling bitlocker. I wanted to reformat the partition it was on, so I wiped it with gparted and now all settings in bios are greyed out and I cannot change anything. What can I do to be able to edit my BIOS?
I also have linux installed on my computer if I could do anything from there.
Need to change the touchpad settings on my Dell XPS 14Z, running Windows Professional XP 64.
Online searches to find the touchpad settings have indicated touchpad settings could be accessed in the Control Panel under Mouse options or via an icon in the taskbar.
Unfortunately, none of these appear true. Control Panel>Mouse does not have any touchpad tabs and there is no touchpad icon in my taskbar.
Attempts to find the user manual for this model have also proved fruitless. The link on the Dell site for the XPS 14z directs me to a user manual for a different model laptop (M1330).
My HP Probook 450 is with Windows 7 and the combination FN + F9/F10 is not working. The other FN keys seem to be in order, but I can't change the brightness of the desktop directly with the FN keys.
View 3 Replies View RelatedI recently upgraded my laptop from the 8920g to the 8930.
My only gripe with the 8930 is that there seems to be alot more backlight leakage in this model. Not so much around the edges (a thin line along the bottom but I guess that seems to be the case with most displays) but more streaks down the middle. Quite noticable if watching a movie on it at night.
What I am trying to do is change the brightness/contrast etc.. settings. I go in to the nvidia control panel settings and can adjust the bars up/down but nothing on the display changes. I can put everything on 0% but it still looks exactly the same. I click the apply button, even try a reboot but still no joy. Is there another way to do this or is my graphic card faulty? I've only had the laptop about a week.
Also, does anyone have any recommended display settings?
I can't change my laptop brightness neither with F2 and F3 keys nor in the settings. I have already updated all my drivers but still have no response when adjusting brightness. I have an hp pavilion sleekbook 15
View 1 Replies View RelatedI have a Dell Precision M4800 laptop with windows 7 64bit. The backlight keyboard goes off if there is no activity for 10 seconds. I'm wondering if there is a way to change this so that it stays on even if there is no typing? (I have no option to change this in the Windows Mobility Center).
View 4 Replies View RelatedWas this ever resolved? I am having the same issue on the same computer that I cannot manually adjust the screen brightness using the function + F2 or function + F3 screen brightness keys.
View 1 Replies View RelatedI have had my laptop for a couple of weeks. I am no longer able to change the brightness with f2/f3 as well as from battery settings.
Model:HP ENVY 15t-u000 x360 CTO Convertible PC
I reinstalled win 7 on my hp g7 laptop and now I can't connect to my router. I'm getting message to install network adapter. When I open network and sharing box and click on change adapter settings,the screen is completely blank. How do I fix this problem if I can"t connect to the internet??
View 9 Replies View RelatedI'm in the process of finding a key-pad equipped notebook and came upon 4510s. is the noise problem mentioned in the review still persists? Did HP issue an update to mitigate the issue?
Besides, after a few months of handling, are there any new issues? How's the build quality holding up?
I've recently bought an HP Probook430 and installed Windows 7 Ultimate 32bit and I don't seem to be able to change the display brightness, using the fn button+f9/f10 (although volume settings are changed in the same method smoothly).
Although the brightness settings don't seem to change, this bar does appear when pressing fn+f9/f10. What should I do in order to make the display brightness settings changable?
I have 2 HP ProBook 4430s.
No 1 Product XU013UT#ABA
When I try to upgrade it asks for a BIOS Adminsistrator Password we do not have that pasword?
No 2 (still not up working)
Product XB140AV
Will the solution for NO1 work for No2?
I've forget my BIOS password
My computer is HP ProBook 450 G1
Product: F4W80PA#UUF
What is the BIOS backup password for hp probook 445 G1.
View 1 Replies View RelatedI have an HP 450 G1 laptop and want to install VirtualBox 64 bit for Linux. It requires that the Bios Virtualization setting be enabled.How do I enable this on the HP 450 G1?
View 2 Replies View RelatedI cant remember my BIOS Password and want to update my BIOS to 2014 version. I was asked for the password I can't remember it.
My Product details:
HP ProBook 4520s Notebook PC
Serial Number: 2CE0410Z72
Product Number: XN670ES
How can I rest bios password ?
Model: probook 4530s
I just bought a second hand Probook 450 G0, and i want to update the bios, but it's protected with a password. The previous owner doesn't know the password, so i'm kind of stuck. Is there a way to unlock the bios?
View 2 Replies View RelatedI bought a laptop off eBay and I need the bios administrator password. Laptop is HP Probook 4430s...
View 2 Replies View RelatedI have a problem with bios administrator password HP probook 4515s , P/n NX649ES#ABD
View 3 Replies View RelatedI finally received my E6400 machine.
Later on today I will update the bios to A15.
In the meanwhile I'm looking for the optimal bios settings for best performance.
I just upgraded my 5315 to 2 gigs ram. Now I would like to increase my video memory to more than 8 mb. Doesn't seem to be a way to do that.
Now that I have more memory, can I not? use more of it for my graphics. 8 meg isn't much memory