I just upgraded my 5315 to 2 gigs ram. Now I would like to increase my video memory to more than 8 mb. Doesn't seem to be a way to do that.
Now that I have more memory, can I not? use more of it for my graphics. 8 meg isn't much memory
trying to find the bios 1.33 for my acer aspire. Because I am going to upgrade to a core 2 duo!
View 7 Replies View RelatedIve been reading the threads here on NBR, and i think the answers to all my problems lie in a BIOS upgrade.
Im using windows XP and have BIOS version 1.27
I went to acers website [url] to downlaod the bios but there is nothing in the windows xp section, all bios versions are in the vista section.
what now?
can i use the vista bios? also what is the winflasher, is it safe? are there any safer alternatives to it?
Second time this has happened. I've downloaded the BIOS update from Acer's website.
Closed all programs, disabled the antivirus and went to flash it. Right after clicking start I get a Verify Error and the sytem freezes and is a dead unit. First time this happened they tried to tell me it was something like $150 to fix even though I did everything right. Now I went to do it again, same thing. Now Acer is telling me it will cost $450 to fix it. It's only 3 months old. They are also saying they are not responsible for anything downloaded from their web site.
So, couple questions. Has anyone successfully flashed their BIOS to 1.34? Does anyone know where you can buy motherboards cheap?
i have bios 1.27 and want to install the latest but am a bit worried about bricking the thing, my fan never seems to be off anymore and the indle temp is between 46 & 51 degrees is this normal for this model. Can i use a memory stick to flash the bios from dos ? cos a dont want to use windows killed my old hp laptop flashing in windows. Anyone have a safe cant fail method of upgrading this bios.
View 4 Replies View RelatedI have a Aispire 5315. I would like to upgrade my bios in DOS to 1.33 before I install a T9300 CPU. The size of the 1.33 bios is 148,000 bytes so I can't put it on a floppy and the zip files is also bigger than 1457664 bytes.
I prefer not to upgrade in Windows although I see many using winflash. Where is this file located.
I attempted to update the BIOS in my Acer Aspire 5315 laptop to no avail, the winbios program froze straight away, while erasing the BIOS I think. So since then I havn't been able to start the laptop, no fans, but does blink a red LED beside the little light icon when left for longer than 10 seconds or so when you press the power button. I've tried the fn+esc method to boot it to flash the bios but nothing at all, tried it with USB and CD-ROM. I've tried removing all the hardware and starting it, I've also tried resetting the CMOS, still no luck.
I'm thinking that the red LED might be a little indicator of hope, or is it maybe the capacitor filling up
I did also change 0x21C, nothing seems wrong though.What is 0x21C?
View 5 Replies View RelatedI just bought used Aspire 3680 laptop, I was told it only had harddrive problem,
however It have few more problems.
1. it won't save bios settings.
2. it won't always boot sometime it takes 3-4 tries before it will boot.
3. when it finally boot it will randomly freeze after 2-10 minutes.
I try new harddrive, reset the memory, unplug the battery.
memtest shows the memory is fine.
So I have bought this Acer laptop for 1 year, and it's BIOS came with V1.0 didn't have UEFI setting, the default is LEGACY. After trying updating that BIOS version to V1.13 successfully, I still don't see the UEFI setting, when I check in a software called HWiNFO64 Program, it says my laptop BIOS is capable of UEFI BIOS. So my main questions are....How can I have UEFI setting in my BIOS? What should I do?
My specs: Intel Core i7-3630QM 2.4GHz, Nvidia Geforce GT 640M 2GB, RAM 8GB, HDD 750GB, Windows 7 Ultimate SP1 x64 (Will upgrade to Windows 8.1 Pro x64 if I can change my BIOS to UEFI boot).
where is Virtualization Technology BIOS setting in aspire v5-561-6607
View 6 Replies View RelatedI have a Gateway NE71B a friend gave me and it has Windows 8 installed. I had to do some repair to it after a drink was spilled into it but I cleaned it out and its been fine, sorta...
Resuming from sleep doesn't work. It is just black. I have to shutit down and that works fine. It appears that a BIOS upgrade is needed and I downloaded the latest BIOS and tried to update it. It uses some 'InsideH2O' update app. Well it goes to reboot and when it tries to apply the BIOS, it keeps saying that it is an invalid firmware image. I've verifiedd that this is the correct BIOS file. I tried other BIOS versions and none will apply, always getting the error. I've researched the utility, extracted the config and BIOS. I'm tempted to tell it to write without verify (its that fustrating).
One option, that seems to saved most people is to disable Secure Boot. No matter what, I cannot do this. It never saves. I followed the official steps of powering off, then power on, set the admin password, disable Secure Boot, save and exit. Secure Boot always stays enabled. I've tried probably 30 times, 10 different ways and it just won't stick. I also noticed that I cannot change other settings in the BIOS. I can set some to a different value but they always revert back. I cannot get the function keys setting to stay on Function Keys. It always defaults back to Special Keys after reboot. Same thing goes with enabling F12 for boot menu.
I've tried removing the coin battery, which has a charge, shorting out the contacts holding it for about a minute, removed power battery and power cable, letting it sit but still no good. I've also tried removing the hard drive. Where is the BIOS data being stored and can it be wiped?
I've been considering getting an Acer laptop but this is starting to steer me away. Definately not getting a Gateway.
Laptop still under warranty. I recently had a motherboard and HDD replacement. I wanted to install Windows myself, but the BIOS was set to UEFI, and I couldn't seem to boot off of a USB drive. So I switched it to Legacy, booted from the pendrive, and installed Windows just fine.
For whatever reason, I went back to try and change the setting to UEFI. Now the laptop switches on, but refuses to boot. I get a black screen, with no logo or any prompt whatsoever to access the BIOS.
I read a bit and seems I need to remove the BIOS battery, let the memory clear itself to reset BIOS settings to default, and try again? If it matters, I re-installed Windows 7 64-bit.
Laptop still under warranty.
I recently had a motherboard and HDD replacement. I wanted to install Windows myself, but the BIOS was set to UEFI, and I couldn't seem to boot off of a USB drive. So I switched it to Legacy, booted from the pendrive, and installed Windows just fine.
I went back to try and change the setting to UEFI. Now the laptop switches on, but refuses to boot. I get a black screen, with no logo or any prompt whatsoever to access the BIOS.
I read a bit and seems I need to remove the BIOS battery, let the memory clear itself to reset BIOS settings to default, and try again? I re-installed Windows 7 64-bit.
I finally received my E6400 machine.
Later on today I will update the bios to A15.
In the meanwhile I'm looking for the optimal bios settings for best performance.
In the BIOS on my Latitude D630 there is an option for the CPU to be seen as a single processor or as two processors. The CPU is a T7500 Core 2 Duo 2.2GHz processor.
The BIOS info states that some applications may run faster when it is seen as two processors. Can anyone give me any insight into what these options actually mean in terms of PC performance ?
Also, what types of application would be impacted by the single processor or two processor options ?
I forgot my dell inspiron 1440 laptop BIOS admin password so i can not change bios settings. reset my bios admin password
View 4 Replies View RelatedMy original 500GB HDD + 32GB SSD has been replaced with 256GB SSD + 500GB HDD and now the HDD has been removed, leaving only the SSD.
So what is the correct setting for SATA operation in BIOS?
Computer = HP Probook 4510S
Operating system Windows 7 professional 32bit
I press esc with startup and then F10 to change bios setting. It only allows me to change date and time setting or restore default settings. I need to enable hardware virtualization to be able to run XP mode....
i have a brand new 2 months old studio 1555. but the problem is that when ever i connect a charger the screen brightness automatically levels up and when ever i restart there after the bios settings revert back to multimedia keys first. having a bois A07.
View 10 Replies View RelatedI've been having problems with the dreaded "black screen" when starting my Yoga13 (but only somethimes!). To try and narrow it down, as there seem to be so many things that can cause this, I went into the Bios settings from "F2" and setup it up to ask for a "Power on" password before starting windows.
What I have discovered is that when the black screen occurs its BEFORE the Bios asks for the initial "Power on" password, ie I cannot see the box asking for the password and so Windows has NOT yet started to load. To overcome this, I just press the power button to switch off the system, wait 20seconds and then it will usually start.
Once past this, no errors ever occur on the windows side.
I am unable to enter Bios settings on z580 with windows 8.1. I have tried everything including holding shift with shutdown and accsesing bios within windows, nothing seems to work and windows just strarts up normally. I also can't find a update to fix this problem.
View 8 Replies View RelatedI have a Probook 4710s with WIndows 7 64-bit. I tried to overclock it, but its seems I can't acess that ''configuration'' page.. I just get to press the F10 key to acess the startup menu, and then BIOS configuration, where I can just toggle some actions etc.. no overclocking there..Is it even overclockable?
View 1 Replies View RelatedI got this Notebook-PC in 2012 it is a G7 series I am fairly sure. My problem is that when I turn off the computer and turn it back on, there is no (esc) option to open bios menu or any option for that matter. Just a blue HP symble directly in the middle of the screen with a small loading symbol below it. I have pressed esc, f1-f10, and pretty much every other key to try to access it. All I really want to do is disable the most annoying f1-f12 function keys.
I am no longer under warranty and my operating system is Windows 8. There are also no error messages at all, just no response to anything just loads up to the password login screen.
Since yesterday, i can not find how to go to bios setting or how to go to booting option.I have read all articles on this forum about pressing esc, f9, or f10 when notebook begin starting.But never work. All of this button never work.
Combination with fn button, but it also didn't work. Everytime i press fn+f9 or fn+f10 when notebook begin start doesn show bios or booting menu.
Does it becouse i use windows 8? My notebook is HP Mini 110-3500 with Windows 8 in it.
Then i try to search 'how to go to bios setting in windows 8', i found many articles, most of them using UEFI bios setting. But on my HP Mini there is no UEFI setting?
How to go to bios setting or how to go to booting options? i want to reinstall this HP Mini using my usb flash drive.
I have a HP dv1131 TX laptop.I am not able to access SATA settings in it. I tried with the BIOS....but it doesnn't seem to display any option pertaining to SATA operation.
View 4 Replies View RelatedRecently I purchased a Dell Latitude D830 motherboard as a replacement for the damaged one in my own system.
The seller didn't tell me that the system has a customized bios and a password, instead he announced it as 'password free'. The board is working and I can enter the BIOS but all settings are locked with a password.
As the seller refuses to take it back, I need to reset the system. The first owner of the board is known and I have the service tag ready. Is there any chance to reflash an original DELL BIOS and to reset the password(s)?
I just flashed BIOS on my thinkpad yoga 20CD00B1US. I got the lates BIOS 1.18/1,09 and sice this flash, I cannot make any changes in BIOS. I can list in BIOS but cannot highlite and change any setting expect quick boot Enabled/Disabled
My even manager is reporting me this warrining: : The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the operating system. This data will be ignored. No further action is necessary; however, you should check with your computer manufacturer for an upgraded BIOS.
I do have set up supervisor password for BIOS, password on power on. When going in BIOS, I am not asked to put password in, which could be the issue.
Which settings are optimum to allow a downgrade to MS Windows 7 on a HP Envy 17 TouchSmart J023CL laptop where the BIOS is F.43?
View 1 Replies View RelatedI have almost applied all methods. I have checked bluetooth is enabled in the bios settings. And also I applied the method of services.msc in command prompt.
I pressed Fn + F2 during installation but bluetooth option is not going to be on. I do not think why it is giving that problem. I have uninstalled the drivers now.