I have a Aispire 5315. I would like to upgrade my bios in DOS to 1.33 before I install a T9300 CPU. The size of the 1.33 bios is 148,000 bytes so I can't put it on a floppy and the zip files is also bigger than 1457664 bytes.
I prefer not to upgrade in Windows although I see many using winflash. Where is this file located.
i have bios 1.27 and want to install the latest but am a bit worried about bricking the thing, my fan never seems to be off anymore and the indle temp is between 46 & 51 degrees is this normal for this model. Can i use a memory stick to flash the bios from dos ? cos a dont want to use windows killed my old hp laptop flashing in windows. Anyone have a safe cant fail method of upgrading this bios.
View 4 Replies View Relatedmake or knows a link so i can download an bootable XP disc for it.. I can't make one because the laptop has too many viruses,like i cant even open AVG or install nlite =[... Please Help[the disc so u can reinstall xp on the laptop]
View 4 Replies View RelatedI m thinking to upgrade my 5315 acer aspire too but I read a lot in this forum and around and i m still not 100 percent sure...
So clearly : do all the 5315 are upgradable...?
Acer support website is clear enough not to confused version or model... so why some users report bios flash problem on some 5315?
I m quite excited to upgrade but also anxious of course...
My acer is a Acer Aspire 5315-202G12Mi (by the way what does "202G12Mi" means?)
I've just completed a CPU upgrade on my 5315 (to a T7300, which took 15 minutes!). I'm now thinking of upgrading the memory from my current 2GB @ 667 MHz (with the new CPU the memory runs at 667 MHz rather than 533 MHz with the old CPU) to 2GB @ 800 MHz.
However, I've read that the performance increase between 667 MHz and 800 MHz is very little, thus, it's not worth spending the money, even if it is only $AUD40.
Can anyone provide any input, benchmarks or experiences?
I have an Aspire 5315, 1Gb ram and a Celeron 2.0
I want to upgrade the ram and i now it will downclock, but my question is:
Is it worth it to buy more than 1Gb? My OS is Vista.
My setup is as follows:
Acer 5315-201G08Mi
Intel(R) Celeron(R) CPU 550 @ 2.00GHz (Socket P)
TOSHIBA MK8046GSX
Intel GL960 chipset
IO chip being 82801HBM (ICH8-M).
2G DDR2 533 ram
Vista Home Basic
MB - ICL50
I've noticed that the supplied Toshiba SATA II drive is running in SATA I mode and not SATA II even though the controller chip supports SATA II.
Perhaps the BIOS has disabled SATA II?
In addition, I'm keen to upgrade the CPU to a T7300, I assume if I follow the directions on this site, everything should work fine? Any known problems with this model?
This is my Aspire opened up
This is a close up where you can see that we can paste a MXM socket (230 pin's)
Now, if I paste a MXM soket it would look like this
But...
If I introduce a graphic card into this new port added by "me". Will my software recognice it?
The bios an windows can sopport it?
I know problems about heat (can be solved) but the important thing is the bios recognition and how to disable x3100 default integrated graphics right?
Hoping to upgrade my daughters 5315 from a celeron 530 to a core 2 duo. So many pages about doing this but my main question is which processors will it accept. CPUID says its a mPGA478 socket but not sure about the chipset whether 960 or 965. Already upgraded to latest bios 1.45.
View 8 Replies View Relatedtrying to find the bios 1.33 for my acer aspire. Because I am going to upgrade to a core 2 duo!
View 7 Replies View RelatedIve been reading the threads here on NBR, and i think the answers to all my problems lie in a BIOS upgrade.
Im using windows XP and have BIOS version 1.27
I went to acers website [url] to downlaod the bios but there is nothing in the windows xp section, all bios versions are in the vista section.
what now?
can i use the vista bios? also what is the winflasher, is it safe? are there any safer alternatives to it?
I just upgraded my 5315 to 2 gigs ram. Now I would like to increase my video memory to more than 8 mb. Doesn't seem to be a way to do that.
Now that I have more memory, can I not? use more of it for my graphics. 8 meg isn't much memory
Second time this has happened. I've downloaded the BIOS update from Acer's website.
Closed all programs, disabled the antivirus and went to flash it. Right after clicking start I get a Verify Error and the sytem freezes and is a dead unit. First time this happened they tried to tell me it was something like $150 to fix even though I did everything right. Now I went to do it again, same thing. Now Acer is telling me it will cost $450 to fix it. It's only 3 months old. They are also saying they are not responsible for anything downloaded from their web site.
So, couple questions. Has anyone successfully flashed their BIOS to 1.34? Does anyone know where you can buy motherboards cheap?
I attempted to update the BIOS in my Acer Aspire 5315 laptop to no avail, the winbios program froze straight away, while erasing the BIOS I think. So since then I havn't been able to start the laptop, no fans, but does blink a red LED beside the little light icon when left for longer than 10 seconds or so when you press the power button. I've tried the fn+esc method to boot it to flash the bios but nothing at all, tried it with USB and CD-ROM. I've tried removing all the hardware and starting it, I've also tried resetting the CMOS, still no luck.
I'm thinking that the red LED might be a little indicator of hope, or is it maybe the capacitor filling up
I gained a lot of information from the 5315 CPU Upgrade Thread. I'd particularly like to thank BigOzone, Hoggie and Quilty997. There are many others but information from the above formed the basis of my upgrade.
Other information I've collected from other parts in the forum.
The specification of the laptop was as follows.
Acer Aspire 5315
Celeron 550 2.0Ghz (eek)
1gb of Ram
Vista Home Basic (double eek)
Atheros Wireless Card
80Gb Toshiba Hard Disk
The new Specification is.
Core2Duo T7500 2.2Ghz 800 Mhz Front Side Bus 4Mb Cache
3Gb of Crucial Ram
Vista Home Basic (No Choice At the Minute)
Intel 4965 AGN Wireless Card
200Gb Hitachi Hard Disk
The CPU Upgrade I won't actually cover, not necessary when there is a fantastic sticky at the top of this forum. The Upgrade took about 15 minutes, but the actual swap took about 5 minutes or so, I was very anal about cleaning the heatsink and applying AS5. I think the biggest scare was the door unerneath, quite tricky to get off and put back on without damaging the tabs.
My main focus is the hard drive swap, whilst maintaining all the eRecovery software. For this I use Acronis True Image Home, I am aware that the trial can be downloaded or users obtain by other means, can I just say BUY IT as it only cost me £17 from Amazon.co.uk and as usual it was cheaper in the US. The biggest reason for buying is that some features are not available in the trial. I also bought a Laptop SATA External Drive Holder and boy was I glad I did......................
I just look at acer support and is listed that last BIOS version for my Acer (4736 ) is 2.06 (Dec 14th) and mine is 2.03 (Oct 27th). Someone has already tried this upgrade?
View 5 Replies View RelatedI have a problem with the bios upgrade on my Aspire 5920G.
I have downloaded from Acer's site the 3813 version and i try to use it with winphlash, the program that is in the folder when i unzip.
I have always an error message, the one in the printscreen.
Yes, i have opened the program with administrator privileges, the same message pops out.
I think that the problem is that i have Windows 7 Ultimate x64.
I am looking for advice on upgrading my BIOS from v0.3204 to v3238. Current Laptop Setup:
Original BIOS v0.3204
Acer 6930G - T6400, 4GB DDR2 and 9600MGT 1GB Graphics GPU.
Plus the usual Hidden Acer Recovery Partitions.
I am currently using VISTA SP2 32bit but I plan to soon install Windows 7 64bit FULL CLEAN INSTALL.
The global acer website currently doesn't list my current BIOS (v0.3204) but does list a new BIOS of v3238 released NOV 2009.
Questions:
1. Is my laptop compatible with BIOS v3238 ?
2. Is it worth upgrading the BIOS to v3238 ?
3. Is BIOS v3238 needed for Windows 7 - 64bit to run better
4. Will VISTA SP2 still work with BIOS v3238
Additionally, if you look in the acer Bios zip file there is also a DOS folder containing the file zk2_3238.exe (eg DOSzk2_3238.exe).
5. Is it therefore best to create a DOS Boot USB DISK and Flash the Bios using the DOS EXE given above (since I have heard bad things about windows flash)?
6. And finally, once the new Bios v3238 has been flashed/upgraded, do you need to do anything else for the Laptop to function as an Acer Laptop (eg will it recognise everything)?
I have installed bios version 1.24 from previous 1.1 for Vista without backup of original bios.
What bios should i choose from Acer Upgrade kit to revert to Vista bios?
I have an ACER Aspire 5520, (model ICW50) with AMD Turion TK55. I tried to upgrade it with the BIOS available under the model's specified page in ACER site, version 1.33 (IC50133.WPH).
Unfortunately I was naive enough to try flash32.exe, which is the windows base version of the flashing program; now I have a dead BIOS. Windows froze completely, I had to unplug and disconnect battery to have it down, and it never came up.
Then I did a lot of research and I found and browsed hundreds of pages about Crisis Recovery Mode (CRM). From all I read there are some misconceptions I want to get past:
1 - Deal with different CRM versions, which get accessed by Fn+B, or Winkey+B; on my case I have found that CRM gets accessed with Fn+Esc.
I know it, because instead of powering up and then dying in 3 or 4 seconds on an eternal loop, when I press and hold Fn+Esc and then I connect the power adapter (with battery disconnected), I get a quick orange flash under the power button. So, when I press the power button the computer keeps running, fan is running, and it is checking HD and CD-ROM drives.
2 - There is a lot of myth about the way one has to press and hold Fn+Esc. You just have to press it before you connect the power cable. As long as you get the quick orange flash under the power button, you know the PC is in CRM. I have done all the fancy combinations of holding those keys down, but it all ends up in the same. By the way, even if you connect the battery, instead of the power adapter, once you are holding Fn+Esc it gives the same result: orange flash, you are in CRM. Of course you do not want to flash it using the battery, that's why the emphasis on connecting the power adaptor instead.
3 - Most of the info I found about this matter then turns to building the Crisis Recovery Disk (a floppy) or a CR pendrive. It does not solve my problem because when in CRM, the computer completely ignores the USB ports, the 4 of them, I tried one by one, be it with 2 different kinds of USB floppy drives, or pendrives duly formatted in FAT. There is no blinking of light on either. There is no attempt at all to access any of the USB ports......................
Today I received my Gateway EC1435u (Acer 1410-2285 clone) and it's VERY nice but it's too bad the screen is so darn reflective.
Anyways, two quick questions:
1) Are there any BIOS updates available? Acer shows a bunch but Gateway's site doesn't list any.
2) Can I delete the first OEM reserved partition? I'd like to install Windows 7 from scratch because I don't need all the bloatware that Gateway installed
ive been looking arouind the forums here and ive read that my acer 5315 can be upgraded a bit which i love as i dont like the poor celeron cpu and the 512mb ram so i bought the best cpu i could which wat a core 2 duo t7700 and 2 2 gig ram sticks (pc2-5300) problem is the cpu works a treat but when i put the 4 gig ram my lappy resets when windows tries to load and i dont understand why? it works great with 1 2gb ram and 1 512mb but only when i put the 512 in 1st then the 2gb stick on top, im sure i have prob miss read sommit but dont know wat, can anyone help me out on this issue? i did do a reformat on my system when i upgraded and i even used a 64 bit windows as i know the 32 bit version dont really like 4 gig
View 6 Replies View RelatedI have the above laptop running windows XP. I installed following the instructions from the soulpass site information.
Everything is perfect apart from this S-video out, which no longer detects the cable is connected. It has worked prior to this installation.
is there any driver I am missing?
i have done a clean install of windows 7 on my 5315 everything runs perfect just one small thing when i use the volume buttons the green bars that used to come up at the bottom of the screen no longer appear,
View 4 Replies View RelatedThe image below willl show you a list of items previously installed on my Acer 5315...
Is it safe to remove any of these or will doing so cause more trouble than its worth.
Reason: I never use any of them. In fact, I just removed all the games from the machine.
I got a problem with my Acer Aspire 5315. The HDD is shown in the bios but won't show in Vista most of the time. The HDD is completely formated, including the Acer partition. So recovery is not an option.
The problem is strange because it is not consistent. Sometimes I am able to acces the drive and install Vista. But then the next day,when i try to boot again, i only see a cursor after the Acer boot screen.
I've tried running in IDE mode. I also tried replacing the HDD with a new one. I installed vista with the correct Intel driver.
I also tried running Linux live cd. It also sees the HDD drive correctly but when i try to acces it, the program freeses.
I'm affraid something is wrong with the I/O controller, or it is a loose cable.
If you think otherwise, please let me know. If not, i'd like to know how I can check the HDD cable.
My Acer 5315 died during a power outage while updating the BIOS. I have been trying to revive it using an old post I found. I suspect everything is ok except for the autoexec.bat file that I have written. Any help? Or does anyone know where I can just get the Inside recovery disc?
View 8 Replies View Relatedim tired of vista on my wifes acer. I have a copy of 7 ultimate that im going to put on there.....if it works..... any info? anyone go to 7 on the 5315?
View 7 Replies View Relatedby chance, my wife, with the 500 dollar limit i gave her, bought me an acer aspire 5315-2698 from qvc. i think after send it over to me here in iraq she spent 575. it was 525 on easy pay.
after all this reading, i went out and bought a few things:
MICRON/SAMSUNG 2GB DDR2 2GB667SO 1 55.00 System/Device = Acer Aspire PC2-5300 667MHZ SODIMM
(from one of those ram websites...)
and
1 Intel Core 2 Duo T8100 2.1GHz Socket P 35W Dual-Core Processor Model BX80577T8100 - Retail
Every so often my laptop shuts down. Like it seems after it comes back from a sleep session the fan doesnt come back on. I had to replace the hard drive in it once because I think it fried from getting to hot. I don't know whats wrong with it. I had a cool pad, but it didnt keep it to cool. Is there any fixes, or fans I could put in it to keep it cool? Or even drill any holes anywhere to cool it down? its an acer 5315 model.
View 8 Replies View Related