I have a Probook 4710s with WIndows 7 64-bit. I tried to overclock it, but its seems I can't acess that ''configuration'' page.. I just get to press the F10 key to acess the startup menu, and then BIOS configuration, where I can just toggle some actions etc.. no overclocking there..Is it even overclockable?
View 1 Replies
In the hp.com configuration options for the ProBook 4710s, they show 3 options:
1. 17.3-inch diagonal LED-backlit HD+6 (1600 x 900) without camera
2. 17.3-inch diagonal LED-backlit HD+6 (1600 x 900) with camera (must select NQ004AV)
3. 17.3-inch diagonal LED-backlit HD+6 (1600 x 900) BrightView with camera (must select NQ004AV)
I thought LED-backlit was good enough, but option #3 is LED-backlit BRIGHTVIEW... Is this a brighter, "better" screen than option #1 or #2? I'm afraid of ordering this and getting another lemon of a "Brightview" screen like my dv7t screen.
What's "HD+6" ... what does "plus six" do for me ?
I don't see an "NQ004AV" option on the order page, either...
HP is just terrible at explaining these things.
Regarding the keyboard ... it's hard to tell from the pictures at Engadget whether this new chiclet keyboard is backlit or not ... HP doesn't say it is backlit, would be awesome if it was.
I'm currently running XP and need to upgrade to Windows 7 Pro. I understand that I'll need to do a clean installation, but I'm wondering if my computer will support Win7Pro?
The computer is running an Intel Core2 Duo CPU t6570 @ 2.10GHz (2.09 GHz), 2.99 GB RAM.
I read about uninstalling and reinstalling the driver for the Synaptic product. Would uninstalling the driver leave me without any mouse funtionality in the mean time?
My product # is FN067UT#ABA
I got this Notebook-PC in 2012 it is a G7 series I am fairly sure. My problem is that when I turn off the computer and turn it back on, there is no (esc) option to open bios menu or any option for that matter. Just a blue HP symble directly in the middle of the screen with a small loading symbol below it. I have pressed esc, f1-f10, and pretty much every other key to try to access it. All I really want to do is disable the most annoying f1-f12 function keys.
I am no longer under warranty and my operating system is Windows 8. There are also no error messages at all, just no response to anything just loads up to the password login screen.
I have a HP dv1131 TX laptop.I am not able to access SATA settings in it. I tried with the BIOS....but it doesnn't seem to display any option pertaining to SATA operation.
View 4 Replies View RelatedComputer = HP Probook 4510S
Operating system Windows 7 professional 32bit
I press esc with startup and then F10 to change bios setting. It only allows me to change date and time setting or restore default settings. I need to enable hardware virtualization to be able to run XP mode....
I just bought a new HP ProBook 450 G1... running Windows 7...I inserted a USB flash drive to copy some some files from my other compute, and got the Windows Messgae "You don't currently have access to open this folder", then I press the "continue" button, and get the message "You have been denied permission to access this folder", and it says "To gain access to this folder you will need to use the security tab".
I click on the "security tab" link, but there is not any "security tab" in the properties menu for the flash drive.
My logon is the administrator and has all accesses checked'.
I also tried other flash drives and a USB harddrive, and access was denied on all of them.
I have a Seagate 1TB hard drive connected via USB as a backup (Memeo-backup software) to my HP Probook 470 G2 (Windows 7 Pro). The Device Access Manager asks me to authenticate myself every 15 min (approx). This is very annoying. Is the solution to uninstall the DAM s/w and what will the consequences be? Or how to get around the Device Access Manager?
View 2 Replies View RelatedI've got HP client security V 8.3.4.1811 pre installed on my new ProBook 450 G2. However when I try to access the "Device Access Manager" the program crashes and show this error:
"at HP.ProtectTools.DeviceAccessManager.BaseViewModel.Load() at HP.ProtectTools.DeviceAccessManager.UserPage.OnLoaded(Object sender, RoutedEventArgs e) at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs) at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised) at
[code]...
I upgraded my probook 4440s from windows 7 pro to windows 8.1 pro. I have installed hp protecttools but I cannot enroll my fingerprint. No access to enroll.
View 4 Replies View RelatedAfter the upgrade to the current UEFI firmware, when I try to access to settings the BIOS ask me for a password. I'm absolutely sure I have not set any password (I hate BIOS passwords). Now I need to start from a USB pendrive and I can't change the startup sequence.
I've read the post about how Acer can support on lost or forgotten passwords("there are very few if no options available from the end user side"), but in this case I've not created any password, as I said
After the upgrade to the current UEFI firmware, when I try to access to settings the BIOS ask me for a password. I'm absolutely sure I have not set any password (I hate BIOS passwords). Now I need to start from a USB pendrive and I can't change the startup sequence.
View 7 Replies View RelatedDoes anyone have experience in modifying their GPU BIOS to overclock their graphic card?
I know its risky, but my graphics card (ATI HD3470 hybrid x2) has no desktop equivalent so i cant use ATI Tools.
I have managed to get a 30% overclock, from 680 mhz to 880 mhz, while at the same time undervolted it by 0.1 volts.
Are there any long term consequences if its stable?
For anyone interested, benchmarks ........
A friend with a desktop PC discovered that by some weird key combination before boot, he could get into further bios screens and set timeouts for disk access etc.
I'm trying to find a way to switch off the Realtek device at the bios level on my AS 5536, with Phoenix bios. Is this possible?
This is my first laptop (VAIO NS105N) and I was curious as to if it were possible, and if so, how?
View 4 Replies View RelatedI have searched the issue and all I can see is I have to flash the bios. I am not comfortable doing that because I have done this before on my Alienware and it took me three days to restart the computer. Everything was messed up.
All I want to be able to do is charge USB devices when the computer is in sleep mode. I have set Windows 8 power mode up, but it appears the BIOS is still preventing this from happening. So I need to access the BIOS.When the computer restarts no message appears to say *'hit F2 to enter BIOS'.So I have tried, Fn + F2, Fn + F1, F1, F2 and none enter the bios on start up. How do I enter bios on this Z50?
I'm a high school junior with a year+ old Acer computer that has broken down twice and is now out of warranty. I purchased this computer with my own money.
My Aspire M laptop will not boot due to the 'boot configuration file being invalid', at least, this is what the 'Recovery' blue screen states. The blue screen offeres to 'Press Esc for UEFI Firmware settings, but is not responsive. I've tried F2, F8, F10, Alt+F10, F12, Space Bar, Delete and Break to try to activate the BIOS interface, all equally unsuccessful.
I followed the instructions to purchase recovery tools from Acer, but without being able to access the BIOS to set the boot order, I've just sunk another $25 into a laptop that doesn't work.
I have been having numerous problems with the BIOS where it will not allow boot device additions, required two power-ups to boot W8, and finally today I can not even get into the BIOS A12 (latest) with F2 or F12. Pushing F2 and F12 was completely ignored by the BIOS as it would only boot W8, even though it worked fine until yesterday. I finally had to pull the hard drive to get the BIOS to give up and let me in.
Seems to have a mind of its own but it did present the BIOS menu. I had no problem using F2 & F12 on BIOS versions A10, A11, A12 before today except A12 did delete all the boot device priorities when initially loaded a week ago. That glitch caused the two power-ups everyone is starting to see. The two power-ups are gone now but I need access occasionally for DVD's. Seems like there is some type of adaptive "smart" (I call it "dumb") strategy in the BIOS that really confuses us users to the point where I am wasting way too much time chasing phantoms.
The really big problem is that there are zero (none) Manuals with this computer. The maintenance disassembly manuals are even gone. No one has any write-up of how the BIOS is supposed to operate? Dell explain how this BIOS is to be used to add boot devices? Pulling HDD's is not the answer for most users as we are just going to wear out the HDD electrical bus connector when you want to boot a legacy MBR ( or an .ISO) DVD.
If you already have BIOS A10 installed. Version A10 was the last unlocked BIOS while A11 and A12 are locked right up and very unpredictable in behaviour. Deleting A10 and the maintenance manuals from the download site is pretty vicious on Dells part in my mind. The maintenance manuals were called "Owners" or "User" Manuals of which the obvious intent was to cover up there are no real owners manual to explain the basics like the Function Keys to get into the BIOS and use it.
I purchased a new Flex 2-15 online the past week. The model name shown on the back is "20405". Manufacture date is May 12, 2014. The User Guide refers to a "Novo Button", which is shown in diagrams as being on both the left edge and the right edge near the front. Neither location has a button of any sort. The right edge has a pinhole in the supposed button location. A curved arrow icon is next to the pinhole. I have an inkling this may be some sort of factory reset button. Lacking the Novo button, what is the procedure for accessing the features which the manual says are accessed by pressing this non-existent button?. That is, BIOS, and/or the one touch image backup/restore system?
View 7 Replies View RelatedI run in some problem with Bios. Few days ago I have changed some settings in Bios and now I can't access it. There is no press enter to interupt booting, F1 or others buttons don't call Bios on boot. What I can do to enter Bios settings again?
View 1 Replies View RelatedI was trying to access my BIOS recently, but whenever I attempt to do so, all I get is a constant beep sound. I used to be able to access the BIOS just fine, but now I can't. The computer itself still boots fine, though I also can't select any boot options either.
I thought I could fix this by resetting the BIOS, but there doesn't appear to be any way of doing that. The CMOS battery is nowhere to be found, and there is no BIOS update for the Y510p that I can apply.
I can get back into the BIOS?
Model: Inspiron 17R Special Edition Inspiron 17R Notebook (Inspiron 7720), Windows 8, 64-bit,English
My laptop was installing updates (not sure which updates) when the battery suddenly died. I charged it and ever since every time I turn it on, it gives me an error message and I'm unable to log into my system
error message is: BAD_SYS-CONF_INFO
I've tried accessing the BIOS with F2 button upon start up many times to check the settings but no luck. Pressing F2 constantly right when the Dell logo appears does absolutely nothing. get back into Windows without reinstalling and losing everything
I can´t enter BIOS on my notebook, I don´t know what´s the problem what to do now.
What did I do? I had Windows 7 installed and everything worked well. Then I decided to install Debian GNU/Linux instead. That worked as well, though I had some issues with wifi connection and the system did not shutdown properly. That´s why I wanted to reinstall Windows. In order to boot from DVD, i had to change the boot order, because Debian always changes its own boot priority to max - so at this point BIOS was still working! During Windows 7 setup, I formated all HDD partitions, created new ones and BAM! Windows 7 would not installt because it has some problems with GPT partitions, it said it could not install to this partition (I tried all). So I canceled the installation and restartet the system. Of course now it printed "Operating system not found". I could not even enter BIOS (allthough it showed the normal message "Press F2 ..." and the Windows 7 installation had trouble finding some drivers, so it did not even start correctly. The Acer Recovery I created from Windows 7 (before installing Debian) started, but it failed to copy the first file and ended. So nothing worked. However, I could install Debian again, which is now my OS.
Current situation: OS is Debian 7, it´s working, but I have many problems with it (cannot change display brightness, often looses wifi connection, instantly reboots (!) after shutdown) Can´t enter BIOS: I have tried F2, DEL, ESC, F10, F12 without success. Debian is again at boot priority #1, and I can´t change it without BIOS (so not able to BOOT from DVD etc) I have tried to short the G2201 contact (service manual describes how to use it to remove BIOS password), no success. Maybe it´s import that I use GRUB bootloader, which was automatically installed with Debian...
I have a T400 2765-P3U model, and it won't boot up. When you turn it on, you see the Thinkvantage logo and it stays there. Trying to access the BIOS is non-responsive. I connected the hard drive to see if it was a hard drive issue, but it's not. The hard drive is response when connected via USB. I can't get past the Thinkvantage logo, no response when attempting to access the BIOS. It's still under warranty, so I'll probably send it in for repair but thought I'd give it a try fixing it before hand.
View 9 Replies View RelatedI bought a u310 slightly used but had a failing HDD. The person who was using it installed an operating system on the SSD and now I can't seem to access the bios at all. I had read that this may happen if Rapid Start is not disabled before formatting the SSD.
What do I need to do to be able to access the bios again? There is no bios files listed as a download for this computer so I can't even seem to be able to flash the bios.
I already sent it to lenovo to replace the HDD and instead they tried to charge me $167 to image the machine, which I said no to and they sent the computer back without fixing it.
I have an Inspiron N5050 and am unable to access the BIOS by tapping F2 during pre-POST.
View 4 Replies View RelatedWhat I Was Doing:
All I wanted to do was install an SSD (SanDisk Extreme 240GB) as my primary drive using factory recovery created from Dell Backup and Recovery/Recovery Media from USB drive.... I was trying to update firmware on the SSD. It requires a download and the creation of a thumb drive to which one boots after adding it in the BIOS. Ever since I tried using that thumb drive during boot (on power up it was in a USB slot with the intention of opening BIOS and setting that thumb drive as a boot device to complete firmware update) things have been a mess.
The Problems:
I have run into a situation where no matter what key I press during startup, it has no impact on the startup. Main problem is that F2 will not open BIOS. F12 does not show Boot Order.
Here are the symptoms:
Cannot access BIOS or Boot Order during POST All partitions on the factory 1TB hard drive now show in Windows File Explorer whereas previously only the partition labeled C: OS was shown
Potentially Stupid Things I Tried:
I discovered that if there are no hard drives installed, the system will boot to a DOS-type screen with options for Boot Order (with no drives it lists only Network Boot), Setup, Diagnostics, and Boot Configuration.
Setup takes me to the BIOS (vA11) but obviously with no drives showing Diagnostics takes to me to a test suite which when run gives me an error on the video memory but all else tests OK (tests of the video memory from within the Dell Suite within Win 8 show no errors) Boot Configuration gives me Legacy, UEFI Secure and UEFI Not Secure
I also downgraded the BIOS from A11 to A08 and then back to A11 in hopes of getting back access to BIOS but no luck.
Dell Inspiron 17R SE 7720, Win 8, 1TB, 32GB mSata, nVidia GT650M/2GB
I have a problem with my dell latitude e5510..... After Updating the Bios last version() ,BIOS has been Locked and i have no access to bios, although system powers up and my windows boots without any problem..... I tried every method searched in internet but no result ... as I realized this model has a high security system...I think by updating the bios a default pass created for the bios.
View 1 Replies View RelatedI recently bought a new E535 laptop working like a charm up to now. Bios access was possible by pressing Enter directly after switching machine one, than came some sort of POST analysis which could be skipped by pressing any key and than came some sort of table where I could access Bios by pressing some key (cannot remember which it was exactly). Alternatively I could enter Bios when in boot menu by pressing tab which switched to another tab where Bios could be entered (also some sort of diagnosis programs could be started). As mentioned in the subject it is impossible for me to do this now, after I did the following:
- exchanged built in HDD with an new SSD (Bios access yet possible)
- changed in Bios Setup boot mode from both (legacy + UEFI) to Uefi only (this might be the problematic point but I'm not sure)
- Installed Windows 7 in Uefi mode on ssd
No when I press enter on startup it brings me to Windows boot manager menu (you know where you can say start Windows normally or in safe mode and so). Boot menu also changed with a new "start windows" entry (well, this seems to be correct), but when switching to the other tab it is empty now, no entry for Bios setup or diagnosis tests anymore.
This is really bad. I have googled around and tried the following up to now without success:
- Pressing F1 instead of enter
- Shutdown laptop, and start with F1 pressed down
- starting without HDD
- starting unmodified HDD which was originally installed in laptop (which cannot be booted anymore, probably because it was installed in legacy mode)
I have also thought about flashing the bios, but the newest version available on lenovo support seems to be 1.04, but pre installed on my laptop is 1.10, so my version is a lot newer. Should I try to flash it nevertheless ?
