HP OS/Software :: ProBook 450 G1 / Access Denied On USB Drives
Mar 17, 2014
I just bought a new HP ProBook 450 G1... running Windows 7...I inserted a USB flash drive to copy some some files from my other compute, and got the Windows Messgae "You don't currently have access to open this folder", then I press the "continue" button, and get the message "You have been denied permission to access this folder", and it says "To gain access to this folder you will need to use the security tab".
I click on the "security tab" link, but there is not any "security tab" in the properties menu for the flash drive.
My logon is the administrator and has all accesses checked'.
I also tried other flash drives and a USB harddrive, and access was denied on all of them.
i have a acer laptop that did have vista on, i have upgraded this recently to windows 7, i have just today bought a new webcam which it says is windows 7 ready plus there are no drivers needed, i can just plug it in and it will work.
sounds nice and easy =]
well, i have plugged it in and it seems to be installing, finds the driver etc, then it says cannot install, then when i go into the device manager and click into the device it sayd access denied, i have tried alsorts to fix it, turned uac off etc and still does same thing, tried in safe mode, i just cannot do it.
I'm willing to purchase my first Macbook Pro, but I have one huge question mark in mind: Will I get to access all my data on my NTFS-formated external hard drives? If so, how, is it natively supported with Mac OS X?
I have a Seagate 1TB hard drive connected via USB as a backup (Memeo-backup software) to my HP Probook 470 G2 (Windows 7 Pro). The Device Access Manager asks me to authenticate myself every 15 min (approx). This is very annoying. Is the solution to uninstall the DAM s/w and what will the consequences be? Or how to get around the Device Access Manager?
I've got HP client security V 8.3.4.1811 pre installed on my new ProBook 450 G2. However when I try to access the "Device Access Manager" the program crashes and show this error:
"at HP.ProtectTools.DeviceAccessManager.BaseViewModel.Load() at HP.ProtectTools.DeviceAccessManager.UserPage.OnLoaded(Object sender, RoutedEventArgs e) at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs) at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised) at [code]...
I have a Probook 4710s with WIndows 7 64-bit. I tried to overclock it, but its seems I can't acess that ''configuration'' page.. I just get to press the F10 key to acess the startup menu, and then BIOS configuration, where I can just toggle some actions etc.. no overclocking there..Is it even overclockable?
I upgraded my probook 4440s from windows 7 pro to windows 8.1 pro. I have installed hp protecttools but I cannot enroll my fingerprint. No access to enroll.
I was very excited to order a dell vostro 1520 online, and i got a great deal on it. i ordered the laptop on the 14th of this month, and according to the email they sent me, it was supposed to be delivered by the 30th... which is pretty late but since i was getting a pretty good deal IMO, i thought "whatever, as long as its here before may 4th".
however, earlier today i got a call from dell telling me that they wont be able to build the laptop since they dont make them anymore.... ??? couldnt they have told me this EARLIER like say, LAST WEEK?
the dell vostro 1520 is STILL listed on their website (dell.com and click on small business) along with many other laptops. i dont know what to do at this point. obviously i will have to order another laptop, and it will come VERY late according to my schedules and time constraints... but which dell laptop can i order and which shouldnt i even bother with since they dont build it anymore and apparently are too lazy to update the website?
I've had an XPS 1710 for 3.5 years and am itching for an upgrade, but I'm doing my best to wait for the xps16 refresh. I'm started to get a bit irritated with the speed of my 160gb 5400 rpm laptop drive so I was thinking of upgrading to a SSD while I wait.
how many hard drives could fit in the Vaio Z, because on the SonyStyle site when configuring the HD's and choosing for example 256GB SSD it shows 2x128GB SSD. Does this mean 2x SSD hard drives? If so then I'm wondering why they don't make the option available to put in 2x256GB SSD's. Also, if 2 SSD's are possible, are 2 standard 2,5" spinning HD's possible?
Just received a box to send my dv9543cl back to HP in the "bay area". I have read on this site that it is advised to remove the hard drives before sending the laptop back to HP for repair. Is this correct?
my notebook has the optiarc 5500S BD Rom and I've only had it for a couple days. I've tried a few blu rays using quickplay but the playback is a little stuttery, especially when skipping from scene to scene. Overall, playback is fairly smooth but my eyes are really picky and I can tell it's not as smooth and fluid as it would be if I were to watch it on my ps3.
I'm wondering if PowerDVD (blu ray version) would be smoother. What are your experiences with blu ray on your notebooks and what software do you use?
I would love a 15k mac pro hd when I order my new system....but are they loud? I have 2 raptors in RAID in my XPS and while its not loud...it's not quiet either. Anyone own a 15k drive and can speak for it in the Mac Pro?
I have 2 WD Elements External Drives - 640GB each, one formatted in FAT32, the other in NTFS.
I know OS X does not write NTFS drives, but I've got NTFS for MAC installed.
I have a problem: Everytime I connect either drive and leave them for sometime (at times just a couple of minutes) they eject unexpectedly. An error message pops up saying that the drive has not been properly ejected.
However, there are times where I can connect without problems but when I try to copy a file, half-way it disconnects again (This is with the NTFS-formatted drive)
On my FAT32 drive, when I connect successfully, either I can copy stuff, or the message : "Error Code 0, unexpected error occured" pops out
What should I do? I have disabled the NTFS for MAC driver but it does not solve my problem.
I'm having a real puzzling problem ... after removing the mother board of my dell c840 to fix a loose ac adapter jack (which was repaired successfully) now after windows xp starts i noticed that neither the opitcal drive a toshiba sdr2102 cdrw/dvd rom drive or the expansion bay cd rom drive a samsung sn-124 drive are working at all..
the are listed in the device manager with a yellow warning flag.. the driver details says error 39 the drivers cant be loaded.... i have tried removing/uninstalling the drives and rebooting ......
but still same problem remains.... the drives do not show up on the my computer listing either...
you get a Z11 configured with one SSD drive, is it possible to later install a second drive on your own? Also, can you install a normal hard drive as a second drive? Like can you get a 128gig SSD drive as a boot drive and then install a 2.5" Hard Drive in the second slot?
Have a VGN-A195EP with C drive 30gb, abd D drive 30GB, as usual C is full of junk, and D is empty and useless. The lappy is ok, and I hate waste, I'm sure with a bit more breathing room on the C drive I'll get a little more life out of it.
way of merging C and D without doing a format and re-install?
