Lenovo Z50 P/Y/Z Series :: Cannot Access BIOS
Jan 14, 2015
I have searched the issue and all I can see is I have to flash the bios. I am not comfortable doing that because I have done this before on my Alienware and it took me three days to restart the computer. Everything was messed up.
All I want to be able to do is charge USB devices when the computer is in sleep mode. I have set Windows 8 power mode up, but it appears the BIOS is still preventing this from happening. So I need to access the BIOS.When the computer restarts no message appears to say *'hit F2 to enter BIOS'.So I have tried, Fn + F2, Fn + F1, F1, F2 and none enter the bios on start up. How do I enter bios on this Z50?
View 2 Replies
ADVERTISEMENT
Nov 25, 2014
I run in some problem with Bios. Few days ago I have changed some settings in Bios and now I can't access it. There is no press enter to interupt booting, F1 or others buttons don't call Bios on boot. What I can do to enter Bios settings again?
View 1 Replies
View Related
Feb 16, 2014
I was trying to access my BIOS recently, but whenever I attempt to do so, all I get is a constant beep sound. I used to be able to access the BIOS just fine, but now I can't. The computer itself still boots fine, though I also can't select any boot options either.
I thought I could fix this by resetting the BIOS, but there doesn't appear to be any way of doing that. The CMOS battery is nowhere to be found, and there is no BIOS update for the Y510p that I can apply.
I can get back into the BIOS?
View 8 Replies
View Related
Oct 20, 2012
I bought a u310 slightly used but had a failing HDD. The person who was using it installed an operating system on the SSD and now I can't seem to access the bios at all. I had read that this may happen if Rapid Start is not disabled before formatting the SSD.
What do I need to do to be able to access the bios again? There is no bios files listed as a download for this computer so I can't even seem to be able to flash the bios.
I already sent it to lenovo to replace the HDD and instead they tried to charge me $167 to image the machine, which I said no to and they sent the computer back without fixing it.
View 9 Replies
View Related
May 10, 2014
How does one reach the bios on a 2014 X1 Carbon? I've tried pressing F1 on the adaptive keyboard strip during boot, to no avail. Before the logo, during the logo, etc.
View 2 Replies
View Related
Sep 11, 2014
I have a problem with my Lenovo G500s 1.1 years (1 year & 1 month). It worked perfectly until last month. It started to freeze. I restarted the computer (btw I was using licenced win8 back then) and then the lenovo logo showed up and it stuck there. I was waiting for about 10 minutes, but nothing happened. I turned it off manually, and then turned it on,it was still frozen. after some trial of startup, it worked normally. After 2 days it happened again. I thought it was the system, so I deleted the windows8 and installed windows8.1 licensed, it worked for a month and then again (last night) it just freezes at startup (lenovo logo shows up). Till now its frozen. I restarted it several times, it didnt work. I also pulled out battery & started on AC power which didnt work too. Obviously, i dont have warranty.
View 9 Replies
View Related
Sep 19, 2013
I formatted my laptop and installed windows 7, and I want to reformat but can not access the BIOS SETUP, already tried different keys without success?
View 5 Replies
View Related
Jan 27, 2014
I have a Ideapad z510.
How I can update the BIOS so I can be able to access advanced options such as memory config, enabling turbo boost, overlocking, changing the boot order (HDD, CDROM, USB, etc)
Currently the BIOS is a very simple and doens't give me advanced options and information.
View 2 Replies
View Related
Jun 21, 2014
I purchased a new Flex 2-15 online the past week. The model name shown on the back is "20405". Manufacture date is May 12, 2014. The User Guide refers to a "Novo Button", which is shown in diagrams as being on both the left edge and the right edge near the front. Neither location has a button of any sort. The right edge has a pinhole in the supposed button location. A curved arrow icon is next to the pinhole. I have an inkling this may be some sort of factory reset button. Lacking the Novo button, what is the procedure for accessing the features which the manual says are accessed by pressing this non-existent button?. That is, BIOS, and/or the one touch image backup/restore system?
View 7 Replies
View Related
Nov 9, 2009
I have a T400 2765-P3U model, and it won't boot up. When you turn it on, you see the Thinkvantage logo and it stays there. Trying to access the BIOS is non-responsive. I connected the hard drive to see if it was a hard drive issue, but it's not. The hard drive is response when connected via USB. I can't get past the Thinkvantage logo, no response when attempting to access the BIOS. It's still under warranty, so I'll probably send it in for repair but thought I'd give it a try fixing it before hand.
View 9 Replies
View Related
Sep 23, 2012
I recently bought a new E535 laptop working like a charm up to now. Bios access was possible by pressing Enter directly after switching machine one, than came some sort of POST analysis which could be skipped by pressing any key and than came some sort of table where I could access Bios by pressing some key (cannot remember which it was exactly). Alternatively I could enter Bios when in boot menu by pressing tab which switched to another tab where Bios could be entered (also some sort of diagnosis programs could be started). As mentioned in the subject it is impossible for me to do this now, after I did the following:
- exchanged built in HDD with an new SSD (Bios access yet possible)
- changed in Bios Setup boot mode from both (legacy + UEFI) to Uefi only (this might be the problematic point but I'm not sure)
- Installed Windows 7 in Uefi mode on ssd
No when I press enter on startup it brings me to Windows boot manager menu (you know where you can say start Windows normally or in safe mode and so). Boot menu also changed with a new "start windows" entry (well, this seems to be correct), but when switching to the other tab it is empty now, no entry for Bios setup or diagnosis tests anymore.
This is really bad. I have googled around and tried the following up to now without success:
- Pressing F1 instead of enter
- Shutdown laptop, and start with F1 pressed down
- starting without HDD
- starting unmodified HDD which was originally installed in laptop (which cannot be booted anymore, probably because it was installed in legacy mode)
I have also thought about flashing the bios, but the newest version available on lenovo support seems to be 1.04, but pre installed on my laptop is 1.10, so my version is a lot newer. Should I try to flash it nevertheless ?
View 4 Replies
View Related
Feb 10, 2013
My R400 laptop (7447-W14) suddenly freezes on boot: it displays the early logo ("thinkpad, to interrupt normal startup, press the blue Thinkvantage button"), and waits forever, neither the bios menu nor the operating system (windows and ubuntu in dual boot) appears.
I can shutdown by holding the power button more than 5s, but on reboot, the same freeze come back, whatever I do:
- holding the F1 key before and after powering on
- holding the "ThinkVantage" button
- doing this on battery, or with power supply (with or without battery)
- trying to boot on an external USB HD drive
It does not seem to be a CPU problem (nothing would be displayed), nor RAM or harddisk one (it is cheked later, at BIOS time).
In fact, I was wondering wether removing and putting back the small battery of the mainboard would solve this problem ... but this battery seems not to be eaysyly found. At least, it is not under the keyboard, where the RAM is.
of course, warranty has ended ... any way, before I throw this laptop to trash ?
View 5 Replies
View Related
Oct 28, 2014
In my business, we created supervisor password and enabled "lock BIOS settings" to prevent access BIOS on model T520i and T530i. But it's always possible to access on "read-only" to BIOS. How to prevent this access ?
View 4 Replies
View Related
Feb 18, 2014
I am trying to install access connections on my x60 but after the I reboot to complete installation I get an error message that msvcp71.dll can't be located.
View 3 Replies
View Related
May 27, 2014
I've just been handed a new W540 to be rebuilt as Win7 x64 via SCCM.
How do I access the boot options to select PXE?
I've use X220 and X230's before and they have a button to access boot options.
Tried F12 and Fn +F12,but it just boots into Win 8.
View 4 Replies
View Related
Mar 14, 2014
I've recently reset my laptop to factory default using the Windows 8 Reset option, and now when I want to access the UEFI settings I get a onekey recovery prompt instead. Is there any way to bypass it because I just transfered my files back and I don't want to reset everything again.
View 2 Replies
View Related
Nov 15, 2014
Till now, my G510 with Win7 64 bit worked perfectly but after going into flight mode and coming back, it no longer recognizes any internet sources, wired or wireless.
Windows troubleshooter says I need to 'turn on wireless capability'. I don't see a wireless hardware switch anywhere on the laptop, fn+f5 does nothing and in the panel for the flightmode, only bluetooth appears (which I can also activate). The device manger says all of the network devices are working normally. I tried reinstalling the latest drivers from Lenovo, but that didn't do anything either. The Windows Mobility Center says that the wireless is turned off, but the 'turn wireless on' button is greyed out and is not able to be clicked.
In an earlier post, it was suggested to check if in "services.msc" the "WLAN AutoConfig" function is activated which is in my case true. WIFI is also activated in the BIOS.
Last thing I tried, was to bring with windows recovery the system back into a state where everything worked fine but also that did not work.
View 2 Replies
View Related
May 26, 2013
Lenovo Ideapad z585
AMD A10-4600M APU w/ Radeon HD Graphics @ 2.30 GHz
6 Gb DDR3 RAM
Windows 8 64-bit
Broadcom 802.11n Network Adapter
My network card is on the fritz, to put it simply. I randomly lose internet access, and my network connection is listed as "Limited Access". Sometimes turning off the adapter and turning it back on solves the problem, but sometimes I need to do a full reboot. My system is the only one affected, so I know its not the router. I have already viewed the similar threads and tried the methods advised with no success.
So far I have:
-Updated my drivers
-Disabled Broadcom Bluetooth service at startup
-Disabled Hybrid Sleep
-Told Windows not to shut the network card off.
I did a System Refresh last week and that's when the problem started.
View 9 Replies
View Related
Aug 14, 2014
Just purchased a G50-30 with win 7 x64. Decided to update the BIOS A7CN40WWW_64 from Lenovo website. The notebook version was A7CN23WW.
Upon reboot, after successful BIOS update, Win 7 booted with errors of Repair option or Normal boot up. Even re-installation of Win 7 will yield BSOD - ACPI non compliant.
Have changed BIOS settings defaults from UEFI to Legacy, it still does not work. This BIOS version is not stable. Can i request for the earlier version of BIOS ?
View 1 Replies
View Related
May 27, 2010
A friend with a desktop PC discovered that by some weird key combination before boot, he could get into further bios screens and set timeouts for disk access etc.
I'm trying to find a way to switch off the Realtek device at the bios level on my AS 5536, with Phoenix bios. Is this possible?
View 5 Replies
View Related
May 9, 2009
This is my first laptop (VAIO NS105N) and I was curious as to if it were possible, and if so, how?
View 4 Replies
View Related
Jan 3, 2015
I'm a high school junior with a year+ old Acer computer that has broken down twice and is now out of warranty. I purchased this computer with my own money.
My Aspire M laptop will not boot due to the 'boot configuration file being invalid', at least, this is what the 'Recovery' blue screen states. The blue screen offeres to 'Press Esc for UEFI Firmware settings, but is not responsive. I've tried F2, F8, F10, Alt+F10, F12, Space Bar, Delete and Break to try to activate the BIOS interface, all equally unsuccessful.
I followed the instructions to purchase recovery tools from Acer, but without being able to access the BIOS to set the boot order, I've just sunk another $25 into a laptop that doesn't work.
View 9 Replies
View Related
Jan 20, 2013
I have been having numerous problems with the BIOS where it will not allow boot device additions, required two power-ups to boot W8, and finally today I can not even get into the BIOS A12 (latest) with F2 or F12. Pushing F2 and F12 was completely ignored by the BIOS as it would only boot W8, even though it worked fine until yesterday. I finally had to pull the hard drive to get the BIOS to give up and let me in.
Seems to have a mind of its own but it did present the BIOS menu. I had no problem using F2 & F12 on BIOS versions A10, A11, A12 before today except A12 did delete all the boot device priorities when initially loaded a week ago. That glitch caused the two power-ups everyone is starting to see. The two power-ups are gone now but I need access occasionally for DVD's. Seems like there is some type of adaptive "smart" (I call it "dumb") strategy in the BIOS that really confuses us users to the point where I am wasting way too much time chasing phantoms.
The really big problem is that there are zero (none) Manuals with this computer. The maintenance disassembly manuals are even gone. No one has any write-up of how the BIOS is supposed to operate? Dell explain how this BIOS is to be used to add boot devices? Pulling HDD's is not the answer for most users as we are just going to wear out the HDD electrical bus connector when you want to boot a legacy MBR ( or an .ISO) DVD.
If you already have BIOS A10 installed. Version A10 was the last unlocked BIOS while A11 and A12 are locked right up and very unpredictable in behaviour. Deleting A10 and the maintenance manuals from the download site is pretty vicious on Dells part in my mind. The maintenance manuals were called "Owners" or "User" Manuals of which the obvious intent was to cover up there are no real owners manual to explain the basics like the Function Keys to get into the BIOS and use it.
View 11 Replies
View Related
Nov 21, 2014
Model: Inspiron 17R Special Edition Inspiron 17R Notebook (Inspiron 7720), Windows 8, 64-bit,English
My laptop was installing updates (not sure which updates) when the battery suddenly died. I charged it and ever since every time I turn it on, it gives me an error message and I'm unable to log into my system
error message is: BAD_SYS-CONF_INFO
I've tried accessing the BIOS with F2 button upon start up many times to check the settings but no luck. Pressing F2 constantly right when the Dell logo appears does absolutely nothing. get back into Windows without reinstalling and losing everything
View 2 Replies
View Related
Nov 29, 2013
I can´t enter BIOS on my notebook, I don´t know what´s the problem what to do now.
What did I do? I had Windows 7 installed and everything worked well. Then I decided to install Debian GNU/Linux instead. That worked as well, though I had some issues with wifi connection and the system did not shutdown properly. That´s why I wanted to reinstall Windows. In order to boot from DVD, i had to change the boot order, because Debian always changes its own boot priority to max - so at this point BIOS was still working! During Windows 7 setup, I formated all HDD partitions, created new ones and BAM! Windows 7 would not installt because it has some problems with GPT partitions, it said it could not install to this partition (I tried all). So I canceled the installation and restartet the system. Of course now it printed "Operating system not found". I could not even enter BIOS (allthough it showed the normal message "Press F2 ..." and the Windows 7 installation had trouble finding some drivers, so it did not even start correctly. The Acer Recovery I created from Windows 7 (before installing Debian) started, but it failed to copy the first file and ended. So nothing worked. However, I could install Debian again, which is now my OS.
Current situation: OS is Debian 7, it´s working, but I have many problems with it (cannot change display brightness, often looses wifi connection, instantly reboots (!) after shutdown) Can´t enter BIOS: I have tried F2, DEL, ESC, F10, F12 without success. Debian is again at boot priority #1, and I can´t change it without BIOS (so not able to BOOT from DVD etc) I have tried to short the G2201 contact (service manual describes how to use it to remove BIOS password), no success. Maybe it´s import that I use GRUB bootloader, which was automatically installed with Debian...
View 9 Replies
View Related
Aug 4, 2014
I have had my laptop for over a year, and after upgrading various drivers in an attempt to fix a random power off issue, have now found that the laptop will BSOD everytime I wake it from sleep.
I am running Windows 8.1
The root cause seems to be that the SSD no longer appears in the BIOS, therefore I am unable to re-install the Intel Rapid Start software and enable RAID which seems to be a requirement.
My BIOS version is 65CN97WW dated 29/01/2013
This is what I see using DISKPART
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 931 GB 0 B *
There is definitely an SSD in the laptop.
Can this be fixed with a BIOS update?
View 4 Replies
View Related
Sep 28, 2014
I just bought Z50-75 with AMD FX7500, 8GB Ram and FreeDOS. I installed Windows 8.1 Pro, and they pulled some drivers during the installation, and I went to Lenovo sight and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and all was O.K. The last drivers that I saw on the site were BIOS drivers, and I downloaded those to and it started the installation after which it said:"The system will now restart for changes to make effect", and it did, but, it would not boot up after that, all it did was show me this on the screen:
And I tried both of the options (the second one with the Windows CD inside), but it just stays where it is, no effect.
I can enter the bios and change the settings, but none of them seem to work because this is the maximum where it will go, the only difference is when I change from AHCI to Compatible mode, it restarts and than I have a blank screen, I have to use the One button Recovery to get back to this one from the picture above...
View 2 Replies
View Related
Nov 27, 2014
My lenovo y40 cant come off integrated gpu. how do i fully disable it in bios etc? my BIOS is fully updated to 1.11 ... I am on a lenovo y40 ....
View 5 Replies
View Related
Feb 18, 2014
I really don't know how to update the bios for the 505s. Where can i download the new bios update and also what are the steps that I have to take? Will the program just update everything once you press yes or will you need to go in to the bios in the start up or what?
View 5 Replies
View Related
Jul 14, 2013
I downloaded the BIOS package from the link: [URL] ..... but I don't know how to update the BIOS. I tried running the file Winflash_Yx00s.bat as Admin but nothing happens. Do I need to flash it using a USB stick and if so then how to do it.
View 2 Replies
View Related
