Lenovo ThinkPad L R/SL :: R400 Freeze On Boot Before BIOS Access
Feb 10, 2013
My R400 laptop (7447-W14) suddenly freezes on boot: it displays the early logo ("thinkpad, to interrupt normal startup, press the blue Thinkvantage button"), and waits forever, neither the bios menu nor the operating system (windows and ubuntu in dual boot) appears.
I can shutdown by holding the power button more than 5s, but on reboot, the same freeze come back, whatever I do:
- holding the F1 key before and after powering on
- holding the "ThinkVantage" button
- doing this on battery, or with power supply (with or without battery)
- trying to boot on an external USB HD drive
It does not seem to be a CPU problem (nothing would be displayed), nor RAM or harddisk one (it is cheked later, at BIOS time).
In fact, I was wondering wether removing and putting back the small battery of the mainboard would solve this problem ... but this battery seems not to be eaysyly found. At least, it is not under the keyboard, where the RAM is.
of course, warranty has ended ... any way, before I throw this laptop to trash ?
View 5 Replies
ADVERTISEMENT
Dec 18, 2009
I made sure the machine was not in sleep or hibernation mode, and the user states the machine was fine a few hours ago.
I removed the hard drive but that did not change the behavior...
View 9 Replies
View Related
May 27, 2014
I've just been handed a new W540 to be rebuilt as Win7 x64 via SCCM.
How do I access the boot options to select PXE?
I've use X220 and X230's before and they have a button to access boot options.
Tried F12 and Fn +F12,but it just boots into Win 8.
View 4 Replies
View Related
May 10, 2014
How does one reach the bios on a 2014 X1 Carbon? I've tried pressing F1 on the adaptive keyboard strip during boot, to no avail. Before the logo, during the logo, etc.
View 2 Replies
View Related
Nov 9, 2009
I have a T400 2765-P3U model, and it won't boot up. When you turn it on, you see the Thinkvantage logo and it stays there. Trying to access the BIOS is non-responsive. I connected the hard drive to see if it was a hard drive issue, but it's not. The hard drive is response when connected via USB. I can't get past the Thinkvantage logo, no response when attempting to access the BIOS. It's still under warranty, so I'll probably send it in for repair but thought I'd give it a try fixing it before hand.
View 9 Replies
View Related
Nov 6, 2012
I have a question about a Second Hard Drive Bay Adapter for a R400 7439 i have looked all over and some say 9.5mm and some say 12mm so what part number or size to get!
View 4 Replies
View Related
Jun 29, 2009
I purchased R400 yesterday and downgraded to XP Pro using the CD coming with the laptop. After the conversion from Vista to XP, I cant see the wireless, bluetooth, finger print etc. In the device manager I can see only "1394 Net Adapter" and "Intel (R) 82567LF Gigabit Network Adapter". Nothing in yellow.
I downloaded the driver file 6hwc05ww and installed but still I can't see any wireless adapter! why it is not coming automatically like other drivers? How can I install it?
View 8 Replies
View Related
Jun 21, 2014
Lenovo R400
If starting I get this Error 0210: Stuck Key 3E
What key make this error?
If system is loading cursor don't working via touchpad.
If I press WIN key which open start menu, or a volume key, touchpad start working.
F4 key dont working.
I tried reset BIOS - problem continue. [URL] .....
View 3 Replies
View Related
Jul 11, 2014
I have the Modelle R400 running Windows 7 Pro (64 bit) on it.
If I run Lenovo Vintage Tools programm teh airbag/active protection icon is grey.
If I click on it it starts the installer and I can install it but after a reboot it shows me that it isn't installed/grey icon again.
View 2 Replies
View Related
Jan 9, 2010
I got this laptop a few days ago, I currently have 7 and XP installed on it and kind of have vista...(read further down).
My 7 seemed to break today after playing around with a program called powerstrip trying to get my external monitor to show the right resolution (I've realised now the cable vga was broke, but meh) but this is not the full problem, after windows 7 failed to boot I tried to boot xp after turning it off during the windows 7 splash screen and now im stuck with a dash when I turn the laptop on (I dont know if its actully related to something I've done or not).
If I turn the laptop on a flashing dash comes on in the top right, it then stops flashing and turns into a none flashing dash further up the screen and just locks here and I cant do anything at all other than trying to restart it. When I had this problem previously (at least I think this problem) on my desktop it usualy turned out to be something usb related but I have everything unplugged (all though the bluetooth adapter light is on when it is doing this) so I realy dont know what to do...............
View 4 Replies
View Related
Jun 8, 2010
I am trying to use the Lenovo Diagnostics Bootable USB. I have to get my BIOS to boot from the USB before my SSD.
In the BIOS, the Startup > Boot menu already looks like the USB is listed first. But when I do a hard boot, Windows still boots from my SSD.
Here is the startup order listed in the BIOS:
1: USB FDD:
2: ATAPI CD0: HL-DT-ST DVDRAM GSA-T50N-(TS)
3: USB CD:
4: ATA HDD0: SAMSUNG MMCQE28G8MUP-OVA-(S1)
5: +USB HDD
6: ATA HDD1:
See, the USB is listed first.
Why doesn't my system boot to the USB? What do those symbols in the boot order mean? For example, why are there three USBs?
View 5 Replies
View Related
Feb 24, 2014
After updating to brand new BIOS from Jan. 19th I cannot boot anymore into Windows 8.1 - always get INACCESSIBLE_BOOT_DEVICE. Tried to repair using a Windows 8.1 USB Stick, no success. Even downgrading to 1.08 did not work as well!
View 1 Replies
View Related
Dec 29, 2011
I bought windows 8 .1 machine from factory. Then I had local shop install 8.1 on larger ssd. I just performed latest bios update and now machine will not boot. I am sure this is uefi related but I am not knowledgable in that area. The boot parameter returned to me by the shop was "legacy only" and secure boot was disabled.
View 8 Replies
View Related
Mar 26, 2014
After the latest system update from Lenovo System update, my laptop T530 doesn't do a successful cold boot. A warm successive boot (with interruptible boot screen) works fine.
But cold boot always fails and the system powers down in less than 5s. This is seen after the BIOS updated to 2.59.1.12. restore to older version of BIOS(downgrade it)?
View 9 Replies
View Related
Jan 13, 2014
two days ago my Lenovo Twist S230u laptop started to freeze a lot, especially when I tried to multitask (like switching to a separate window). It probably took ten minutes each time for the computer to unfreeze and continue.
the in-built 'Lenovo Solutin Center' software ran an automatic diagnostic test, and said that the laptop failed the SMART short-self test (unfortunately I forgot to copy the error code). I didn't think much of it at the time since my laptop is only 5-months old. Just in case, I performed a disk cleanup, disk defrag and made sure everything is up to date. This was when the laptop began to freeze quite a lot. In desperation (and stupidity), I typed the chkdsk /r command in command prompt and asked it to run at reboot. Apparently the SMART short self test is a physical problem rather than a software problem, so obviously chkdsk won't work.
chkdsk ran for about two days now which is clearly too long for a 500gb HDD laptop. I've only used about half of this space too. I forced a shut down and now I cannot access Windows 8.1 through the boot menu (it just hangs on a black screen). Loading a rebootable USB recovery drive is not doing anything too.
I previously sought support on the Microsoft Answers website. They said that my 'hard disk is failing' and I will need to have my HDD replaced.I just want a second opinion here. Is warranty valid under this circumstance? From what I remember, 'Lenovo Solution Center' said I still had a few hundred days of warranty left on the machine.
View 1 Replies
View Related
Mar 3, 2014
I got a X230 with 4GB 1Rx8 PC3-12800S-11-12-B4 memory installed. I tried to upgrade it with two Kingston KVR1066D3S7/4G 1.5V memory sticks.
Unfortunately after installing new memory sticks (combinations don't matter) my laptop doesn't power on. After pressing the button there's just a flash and BIOS doesn't boot.
Everything is back to normal after restoring the previous RAM configuration.
Is there something wrong with my memory sticks or is it some kind of bior issue or maybe something else?
View 7 Replies
View Related
Aug 7, 2014
I bought a ThinkPad 540p that comes with preloaded Windows 8.1. As I want to dual boot the machine I tried to select the Legacy Boot option in the BIOS/Startup tab, but I can't do anything as the option UEFI/Legacy Book is greyed out and locked in "UEFI Only". Below it there is an option called: -CSM Support that is also greyed out and selected as [No]. (below these options there is a little note with an asterisk saying "Unselectable for Secure Boot").
How can I enable the UEFI/Legacy Boot option again in order to dual boot the computer? I want to be able to boot from USB or from the CD Drive.
View 2 Replies
View Related
Jan 3, 2013
What I Was Doing:
All I wanted to do was install an SSD (SanDisk Extreme 240GB) as my primary drive using factory recovery created from Dell Backup and Recovery/Recovery Media from USB drive.... I was trying to update firmware on the SSD. It requires a download and the creation of a thumb drive to which one boots after adding it in the BIOS. Ever since I tried using that thumb drive during boot (on power up it was in a USB slot with the intention of opening BIOS and setting that thumb drive as a boot device to complete firmware update) things have been a mess.
The Problems:
I have run into a situation where no matter what key I press during startup, it has no impact on the startup. Main problem is that F2 will not open BIOS. F12 does not show Boot Order.
Here are the symptoms:
Cannot access BIOS or Boot Order during POST All partitions on the factory 1TB hard drive now show in Windows File Explorer whereas previously only the partition labeled C: OS was shown
Potentially Stupid Things I Tried:
I discovered that if there are no hard drives installed, the system will boot to a DOS-type screen with options for Boot Order (with no drives it lists only Network Boot), Setup, Diagnostics, and Boot Configuration.
Setup takes me to the BIOS (vA11) but obviously with no drives showing Diagnostics takes to me to a test suite which when run gives me an error on the video memory but all else tests OK (tests of the video memory from within the Dell Suite within Win 8 show no errors) Boot Configuration gives me Legacy, UEFI Secure and UEFI Not Secure
I also downgraded the BIOS from A11 to A08 and then back to A11 in hopes of getting back access to BIOS but no luck.
Dell Inspiron 17R SE 7720, Win 8, 1TB, 32GB mSata, nVidia GT650M/2GB
View 6 Replies
View Related
Aug 15, 2014
Running Windows 8.1 for some time, but latest updates (8/13/14) cause the problem. Restore point and shutting down updates allows use, but it's a short term fix.Which update causes the paroblem?
View 7 Replies
View Related
May 7, 2010
I just got an acer aspire timeline 5810tz, which came with vista, so i was in the process of reformatting it to have XP, which i've done several times on my previous laptops. When i changed the bios to IDE, which is what i read was the correct setting (perhaps this is where my problem is?), i found that i could no longer boot the computer or access setup, bios or the boot menu. When i attempt to do any of these things, the computer just sits on the logo screen.
i'm getting fairly desperate at this point, having tried a large variety of solutions, key combos, removing the battery, etc.
View 10 Replies
View Related
Dec 26, 2014
My Aspire M laptop will not boot due to the 'boot configuration file being invalid', at least, this is what the 'Recovery' blue screen states. The blue screen offers to 'Press Esc for UEFI Firmware settings, but is not responsive. I've tried F2, F8, F10, Alt+F10, F12, Space Bar, Delete and Break to try to activate the BIOS interface, all equally unsuccessful.
I followed the instructions to purchase recovery tools from Acer, but without being able to access the BIOS to set the boot order, I've just sunk another $25 into a laptop that doesn't work. The cost of service exceeds the cost of the laptop, so I'm inclined to continue trying to repair it myself. If it cant' be repaired, there is little chance I'll purchase a new Acer to replace it as this has been a very frustrating experience.
View 9 Replies
View Related
Nov 20, 2013
For some time now I have had the problem that the Access Connections configuration window doesn't open. The icon in the taskbar does work as expected, it shows the configured profiles and I can switch between them. But I cannot edit them or create new ones, because the configuration window doesn't start. The access connections task is running in the background, but there is no visible window.
I'm using version 6.10 under Windows 7, and the problem exists on several different ThinkPad models (R500, R61). Reinstalling didn't work.
In two cases I know that Windows 7 has been updated from Vista, I'm not sure whether this is the case for all of the affected machines.
View 1 Replies
View Related
Feb 18, 2014
I am trying to install access connections on my x60 but after the I reboot to complete installation I get an error message that msvcp71.dll can't be located.
View 3 Replies
View Related
Jan 14, 2015
I have searched the issue and all I can see is I have to flash the bios. I am not comfortable doing that because I have done this before on my Alienware and it took me three days to restart the computer. Everything was messed up.
All I want to be able to do is charge USB devices when the computer is in sleep mode. I have set Windows 8 power mode up, but it appears the BIOS is still preventing this from happening. So I need to access the BIOS.When the computer restarts no message appears to say *'hit F2 to enter BIOS'.So I have tried, Fn + F2, Fn + F1, F1, F2 and none enter the bios on start up. How do I enter bios on this Z50?
View 2 Replies
View Related
Jun 21, 2014
I purchased a new Flex 2-15 online the past week. The model name shown on the back is "20405". Manufacture date is May 12, 2014. The User Guide refers to a "Novo Button", which is shown in diagrams as being on both the left edge and the right edge near the front. Neither location has a button of any sort. The right edge has a pinhole in the supposed button location. A curved arrow icon is next to the pinhole. I have an inkling this may be some sort of factory reset button. Lacking the Novo button, what is the procedure for accessing the features which the manual says are accessed by pressing this non-existent button?. That is, BIOS, and/or the one touch image backup/restore system?
View 7 Replies
View Related
Nov 25, 2014
I run in some problem with Bios. Few days ago I have changed some settings in Bios and now I can't access it. There is no press enter to interupt booting, F1 or others buttons don't call Bios on boot. What I can do to enter Bios settings again?
View 1 Replies
View Related
Feb 16, 2014
I was trying to access my BIOS recently, but whenever I attempt to do so, all I get is a constant beep sound. I used to be able to access the BIOS just fine, but now I can't. The computer itself still boots fine, though I also can't select any boot options either.
I thought I could fix this by resetting the BIOS, but there doesn't appear to be any way of doing that. The CMOS battery is nowhere to be found, and there is no BIOS update for the Y510p that I can apply.
I can get back into the BIOS?
View 8 Replies
View Related
Oct 20, 2012
I bought a u310 slightly used but had a failing HDD. The person who was using it installed an operating system on the SSD and now I can't seem to access the bios at all. I had read that this may happen if Rapid Start is not disabled before formatting the SSD.
What do I need to do to be able to access the bios again? There is no bios files listed as a download for this computer so I can't even seem to be able to flash the bios.
I already sent it to lenovo to replace the HDD and instead they tried to charge me $167 to image the machine, which I said no to and they sent the computer back without fixing it.
View 9 Replies
View Related
Sep 23, 2012
I recently bought a new E535 laptop working like a charm up to now. Bios access was possible by pressing Enter directly after switching machine one, than came some sort of POST analysis which could be skipped by pressing any key and than came some sort of table where I could access Bios by pressing some key (cannot remember which it was exactly). Alternatively I could enter Bios when in boot menu by pressing tab which switched to another tab where Bios could be entered (also some sort of diagnosis programs could be started). As mentioned in the subject it is impossible for me to do this now, after I did the following:
- exchanged built in HDD with an new SSD (Bios access yet possible)
- changed in Bios Setup boot mode from both (legacy + UEFI) to Uefi only (this might be the problematic point but I'm not sure)
- Installed Windows 7 in Uefi mode on ssd
No when I press enter on startup it brings me to Windows boot manager menu (you know where you can say start Windows normally or in safe mode and so). Boot menu also changed with a new "start windows" entry (well, this seems to be correct), but when switching to the other tab it is empty now, no entry for Bios setup or diagnosis tests anymore.
This is really bad. I have googled around and tried the following up to now without success:
- Pressing F1 instead of enter
- Shutdown laptop, and start with F1 pressed down
- starting without HDD
- starting unmodified HDD which was originally installed in laptop (which cannot be booted anymore, probably because it was installed in legacy mode)
I have also thought about flashing the bios, but the newest version available on lenovo support seems to be 1.04, but pre installed on my laptop is 1.10, so my version is a lot newer. Should I try to flash it nevertheless ?
View 4 Replies
View Related
Sep 11, 2014
I have a problem with my Lenovo G500s 1.1 years (1 year & 1 month). It worked perfectly until last month. It started to freeze. I restarted the computer (btw I was using licenced win8 back then) and then the lenovo logo showed up and it stuck there. I was waiting for about 10 minutes, but nothing happened. I turned it off manually, and then turned it on,it was still frozen. after some trial of startup, it worked normally. After 2 days it happened again. I thought it was the system, so I deleted the windows8 and installed windows8.1 licensed, it worked for a month and then again (last night) it just freezes at startup (lenovo logo shows up). Till now its frozen. I restarted it several times, it didnt work. I also pulled out battery & started on AC power which didnt work too. Obviously, i dont have warranty.
View 9 Replies
View Related
