I just got an acer aspire timeline 5810tz, which came with vista, so i was in the process of reformatting it to have XP, which i've done several times on my previous laptops. When i changed the bios to IDE, which is what i read was the correct setting (perhaps this is where my problem is?), i found that i could no longer boot the computer or access setup, bios or the boot menu. When i attempt to do any of these things, the computer just sits on the logo screen.
i'm getting fairly desperate at this point, having tried a large variety of solutions, key combos, removing the battery, etc.
Flashing the bios. I have a Aspire 5810TZ. I boot it up and it just says 'acer' and won't go any further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
What do I do? I have tried copying the files to a USB and powering on with Fn-Esc held down. After letting go of the power button and holding Fn-Esc a different screen appears after 30 seconds. I let go and have given it 30 minutes but it is not doing anything. I have read online from other people the power button should be blinking. Do I need to rename one of the files.
My Aspire M laptop will not boot due to the 'boot configuration file being invalid', at least, this is what the 'Recovery' blue screen states. The blue screen offers to 'Press Esc for UEFI Firmware settings, but is not responsive. I've tried F2, F8, F10, Alt+F10, F12, Space Bar, Delete and Break to try to activate the BIOS interface, all equally unsuccessful.
I followed the instructions to purchase recovery tools from Acer, but without being able to access the BIOS to set the boot order, I've just sunk another $25 into a laptop that doesn't work. The cost of service exceeds the cost of the laptop, so I'm inclined to continue trying to repair it myself. If it cant' be repaired, there is little chance I'll purchase a new Acer to replace it as this has been a very frustrating experience.
I got this laptop a few days ago, I currently have 7 and XP installed on it and kind of have vista...(read further down).
My 7 seemed to break today after playing around with a program called powerstrip trying to get my external monitor to show the right resolution (I've realised now the cable vga was broke, but meh) but this is not the full problem, after windows 7 failed to boot I tried to boot xp after turning it off during the windows 7 splash screen and now im stuck with a dash when I turn the laptop on (I dont know if its actully related to something I've done or not).
If I turn the laptop on a flashing dash comes on in the top right, it then stops flashing and turns into a none flashing dash further up the screen and just locks here and I cant do anything at all other than trying to restart it. When I had this problem previously (at least I think this problem) on my desktop it usualy turned out to be something usb related but I have everything unplugged (all though the bluetooth adapter light is on when it is doing this) so I realy dont know what to do...............
Yesterday I flashed the firmware of my XPS L702X to version A19, which enabled UEFI boot mode. I decided to go ahead and try to install Windows 7 in UEFI mode on a GPT disk. Installation succeeded, booting failed however. Then I read a message on the web from someone who succesfully installed Windows 8 on the same machine in UEFI boot mode on a GPT disk. So I decided to try Windows 8 instead. Installation failed. Using the recovery menu from the Windows 8 installation media, I wanted to try and see how far installation had come and more or less accidentally selected in some "Advanced options" menu to reboot to my USB flash drive (where the Windows 8 files were on). Rebooted fine. Then I shutdown, using the regular option.
When I turned on my machine again, I found out that pressing either F2 or F12, for the firmware setup and the boot menu, respectively, didn't work anymore. The firmware recognised my input, as the text in the lower right of the Dell splash screen became lighter, but instead of entering setup or the boot menu went straight ahead to boot my existing and working Windows 7 installation on my first (MBR) hard drive instead.
So, in short, I am locked out of setup and the boot menu. I have already tried reflashing the firmware, but without any luck. What to do now?
i've successfuly flashed my 4810t to bios 1.10, 1.20 and 1.22.. but yesterday i tried to get to 1.23, it installed ok in windows and restarted... now it wont go past the "press f2 to enter"... i press f2 and nothing... after a few keypresses it starts to make a sound... oh and the leafy button works here...
is there anything i can do? or i must use the warranty?
I'm a high school junior with a year+ old Acer computer that has broken down twice and is now out of warranty. I purchased this computer with my own money.
My Aspire M laptop will not boot due to the 'boot configuration file being invalid', at least, this is what the 'Recovery' blue screen states. The blue screen offeres to 'Press Esc for UEFI Firmware settings, but is not responsive. I've tried F2, F8, F10, Alt+F10, F12, Space Bar, Delete and Break to try to activate the BIOS interface, all equally unsuccessful.
I followed the instructions to purchase recovery tools from Acer, but without being able to access the BIOS to set the boot order, I've just sunk another $25 into a laptop that doesn't work.
I tried to update the BIOS on ACER Aspire 5810tz-4657 and it failed. The computer powers up with a few lights (no monitor activity or cd activity...but USB's flash once indicating a 'check' maybe?) and either powers off immediately and powers back up...or just sits powered on with power light and wireless light remaining on. The HD does some spinning as well.
I can´t enter BIOS on my notebook, I don´t know what´s the problem what to do now.
What did I do? I had Windows 7 installed and everything worked well. Then I decided to install Debian GNU/Linux instead. That worked as well, though I had some issues with wifi connection and the system did not shutdown properly. That´s why I wanted to reinstall Windows. In order to boot from DVD, i had to change the boot order, because Debian always changes its own boot priority to max - so at this point BIOS was still working! During Windows 7 setup, I formated all HDD partitions, created new ones and BAM! Windows 7 would not installt because it has some problems with GPT partitions, it said it could not install to this partition (I tried all). So I canceled the installation and restartet the system. Of course now it printed "Operating system not found". I could not even enter BIOS (allthough it showed the normal message "Press F2 ..." and the Windows 7 installation had trouble finding some drivers, so it did not even start correctly. The Acer Recovery I created from Windows 7 (before installing Debian) started, but it failed to copy the first file and ended. So nothing worked. However, I could install Debian again, which is now my OS.
Current situation: OS is Debian 7, it´s working, but I have many problems with it (cannot change display brightness, often looses wifi connection, instantly reboots (!) after shutdown) Can´t enter BIOS: I have tried F2, DEL, ESC, F10, F12 without success. Debian is again at boot priority #1, and I can´t change it without BIOS (so not able to BOOT from DVD etc) I have tried to short the G2201 contact (service manual describes how to use it to remove BIOS password), no success. Maybe it´s import that I use GRUB bootloader, which was automatically installed with Debian...
Acer Aspire V3-772G - BIOS setup utility menu items have disappeared
I have setup this brand new laptop, pre-installed with Windows 8.1, for my sister-in-law who bought it. The installation went well BUT the 16GB USB device which I purchased as advised by the Acer literature to store the recovery partition was not big enough, the physical capacity being 14.4GB. The Acer book says use a 16GB device or larger so I did. I naively thought that a USB drive which was labelled 16GB would be appropriate. Not so. I have had to buy a larger one but am still awaiting delivery.
I therefore decided to image the whole HDD to save the work I had done but found that the Acronis Backup and Recovery DVD would not boot. I went into the setup utility and adjusted the Boot settings to legacy and changed device priority. Acronis would not run so I did not continue. I went back into the setup utility, used F9 to restore the default and found to my astonishment that the DUAL boot option had now disappeared and the Windows Boot option had also vanished.
This means that this £800 laptop is now unusable. The setup utility self-reconfigured without warning. Nowhere is there any advice or warning not to use the setup utility in case it erases features which cannot be recovered by using F9 to recover the default configuration. If this is not a serious design fault, I don't know what is.
I am deeply worried because the idea of a BIOS setup utility behaving this way seems so improbable. How is it that the setup utility has been designed to self-harm like this?
Acer Aspire V3-772G - BIOS setup utility menu items have disappeared
I have setup this brand new laptop, pre-installed with Windows 8.1, for my sister-in-law who bought it. The installation went well BUT the 16GB USB device which I purchased as advised by the Acer literature to store the recovery partition was not big enough, the physical capacity being 14.4GB. The Acer book says use a 16GB device or larger so I did. I naively thought that a USB drive which was labelled 16GB would be appropriate. Not so. I have had to buy a larger one but am still awaiting delivery.
I therefore decided to image the whole HDD to save the work I had done but found that the Acronis Backup and Recovery DVD would not boot. I went into the setup utility and adjusted the Boot settings to legacy and changed device priority. Acronis would not run so I did not continue. I went back into the setup utility, used F9 to restore the default and found to my astonishment that the DUAL boot option had now disappeared and the Windows Boot option had also vanished.
This means that this £800 laptop is now unusable. The setup utility self-reconfigured without warning. Nowhere is there any advice or warning not to use the setup utility in case it erases features which cannot be recovered by using F9 to recover the default configuration. If this is not a serious design fault, I don't know what is.
BIOS setup utility behaving this way seems so improbable. How is it that the setup utility has been designed to self-harm like this?
I have tried mashing f2 a million times, but no luck. f12, f8, ...none of these get me into the BIOS.
What key combo will get me into the BIOS?
I have BSOD and cant access Windows via Safe Mode, but only the command prompt from Windows Repair.
The BSOD is a 7b meaning some disk issue...tried all troubleshooting like unplugging all peripherals, removing RAM 1 board at a time, swapping RAM position....etc.
How do I access the Advance setting in BIOS on Acer aspire 5332 ?I can access bios via the f2 button on startup but there is no advance tab being displayed.
Preface: I am stuck being tech support for my brother who is living in Torres Vedras, Portugal right now. He is having some problems with a pretty new Acer Aspire 5810TZ that was given to him around Christmas time. The computer had been used for about a month before he received it and had a few programs installed on it along with the usual bloatware. I cleaned up what I could before he left for Portugal again and installed AVG anti-virus, MS Office '07, and Windows 7.
Now that he is back in Portugal he is having problems with the things he uses most on the computer (Built in microphone not working, built in webcam only working randomly for a short amount of time, and DivX failing any time he tries to watch tv or movies online) I've walked him through updating all the drivers and reinstalling DivX, but nothing seems to fix these problems and Windows 7 is starting to look like more trouble than it is worth to him.
Main Question: Is there any way to restore the computer back to the way it was when first purchased (with Vista or 7, whichever will work) without the use of recovery discs (He does not have any with him over seas) in a way that is simple enough for me to relay to him?
I have a T400 2765-P3U model, and it won't boot up. When you turn it on, you see the Thinkvantage logo and it stays there. Trying to access the BIOS is non-responsive. I connected the hard drive to see if it was a hard drive issue, but it's not. The hard drive is response when connected via USB. I can't get past the Thinkvantage logo, no response when attempting to access the BIOS. It's still under warranty, so I'll probably send it in for repair but thought I'd give it a try fixing it before hand.
All I wanted to do was install an SSD (SanDisk Extreme 240GB) as my primary drive using factory recovery created from Dell Backup and Recovery/Recovery Media from USB drive.... I was trying to update firmware on the SSD. It requires a download and the creation of a thumb drive to which one boots after adding it in the BIOS. Ever since I tried using that thumb drive during boot (on power up it was in a USB slot with the intention of opening BIOS and setting that thumb drive as a boot device to complete firmware update) things have been a mess.
The Problems:
I have run into a situation where no matter what key I press during startup, it has no impact on the startup. Main problem is that F2 will not open BIOS. F12 does not show Boot Order.
Here are the symptoms:
Cannot access BIOS or Boot Order during POST All partitions on the factory 1TB hard drive now show in Windows File Explorer whereas previously only the partition labeled C: OS was shown
Potentially Stupid Things I Tried:
I discovered that if there are no hard drives installed, the system will boot to a DOS-type screen with options for Boot Order (with no drives it lists only Network Boot), Setup, Diagnostics, and Boot Configuration.
Setup takes me to the BIOS (vA11) but obviously with no drives showing Diagnostics takes to me to a test suite which when run gives me an error on the video memory but all else tests OK (tests of the video memory from within the Dell Suite within Win 8 show no errors) Boot Configuration gives me Legacy, UEFI Secure and UEFI Not Secure
I also downgraded the BIOS from A11 to A08 and then back to A11 in hopes of getting back access to BIOS but no luck.
My R400 laptop (7447-W14) suddenly freezes on boot: it displays the early logo ("thinkpad, to interrupt normal startup, press the blue Thinkvantage button"), and waits forever, neither the bios menu nor the operating system (windows and ubuntu in dual boot) appears.
I can shutdown by holding the power button more than 5s, but on reboot, the same freeze come back, whatever I do: - holding the F1 key before and after powering on - holding the "ThinkVantage" button - doing this on battery, or with power supply (with or without battery) - trying to boot on an external USB HD drive
It does not seem to be a CPU problem (nothing would be displayed), nor RAM or harddisk one (it is cheked later, at BIOS time).
In fact, I was wondering wether removing and putting back the small battery of the mainboard would solve this problem ... but this battery seems not to be eaysyly found. At least, it is not under the keyboard, where the RAM is.
of course, warranty has ended ... any way, before I throw this laptop to trash ?
I have Acer Aspire 5810TZ-4433 (Model MS2272) laptop unit. The HDMI connection to my TV functioned correctly until yesterday when it will no longer show the desktop icons or live internet connections on my TV screen. I have wallpaper which shows (The MS wolf theme that is included in the Win 7 Pro OS) just fine but no desktop icon overlays nor will it show the live internet windows.
The laptop itself appears to be functioning normally. For some reason the HDMI cable is not carrying the other digital data to my TV screen.
In summary: Laptop screen shows all the icons on the desktop with them overlaying the "wolf" wallpaper background. I have normal functioning of the computer when I click on these icons.
TV screen: Shows only the 'wolf" wallpaper background. No other information is viewable on the TV
I have tried using different HDMI inputs on the TV using several different HDMI cables all without success. To my knowledge there has been no damage to the laptop's HDMI output connector.
One is marketed as business-grade, another is consumer-grade. Both look very similar and I am not sure if the materials used are any different. So tell me, as I am preparing to buy my next laptop.
I recently updated my bios on my R7-571 and it has caused me great woe. My computer will lock hard between 3 min and 3:30 min after bootup if I don't disable the WIndows Managment INstrumentation service. THis of course caused other problems on services that depend on that like LogMeIn. I need a solution to this. Either a way to downgrade to an earlier bios which I don't think is possible without a version of the bios updater that will support this, or a newer bios that addresses this issue.
The original hdd was stopped functioning on my aspire v5-431. I try to put in other laptop but wont spin at all. The laptop was preinstalled with Windows 8 UEFI and safe boot on or something like that and gpt partition i guess and now i can not boot or enter in bios, how to flash bios or to install on this new hdd windows 8.
I tried everything from removing the motherboard batteryto boot from usb with bios file and Crisis files and nothing. The f2 button doesn't work and acer crisis recovery ask for wph file format and i just have rom file format.
I updated my Acer Aspire 4752g's BIOS to use the BIOS_Acer_2.10_Windows.zip in the BIOS downloads in the Acer site and when my laptop rebooted it was stuck in a black screen. I've tried doing the FN+ESC and tried all the BIOS downloads in the Acer site but it still did not work.
I had installed Windows 7 and it was working fine but it blue screened and now it won't start. Fine, I decided I'd just reinstall it but if I put my flash drive in it will just stick at the Acer Empowering People splash screen and won't move for a while and then just goes to a screen about something being not connected and then it'll boot to the normal start Windows Recovery (Which doesn't work) and start Windows normally. If you try to start it normally it'll either stay on the Windows animation starting or get to login and then i'll input my password but it goes to Blue Screen.
I formatted the flash drive using this guide [url]
I've tried having USB FDD and USB HDD as the first boot option and still nothing.
i was wanting to install ubunu, but i can't get into the bios without a password. someone told me it's' a administrative password. someone told me it has nothing to do with the hdd password. i need to change the order of the bootup for this to work. id rather not pay for this. i also know removing the cmos battery won't do any good either. is there a cracker or patch i can use? i was gonna download the latest software for my acer aspire m5-583p laptop but didn't because it would ask for a password.
I just buy an Acer Aspire V3-371, then I delete all partitions in HDD and install MS Windows and driver for this notebook. Everything are OK until I ugrade BIOS form v1.05 to v1.08. Now, it cannot boot to MS Windows and shows me "No Bootable Device".
I try to reinstall MS Windows, but I see a notice "Windows can't be installed on this drive" with details "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks".
