Acer Aspire R7-571 :: Locks 3 Min After Boot With BIOS 2.09
Oct 28, 2014
I recently updated my bios on my R7-571 and it has caused me great woe. My computer will lock hard between 3 min and 3:30 min after bootup if I don't disable the WIndows Managment INstrumentation service. THis of course caused other problems on services that depend on that like LogMeIn. I need a solution to this. Either a way to downgrade to an earlier bios which I don't think is possible without a version of the bios updater that will support this, or a newer bios that addresses this issue.
Running Vista Home premium. The Network and Sharing center locks up. It is connected to the internet but the connection icon show the red X. Hovering over it reveals a "server execution failed" message.
The original hdd was stopped functioning on my aspire v5-431. I try to put in other laptop but wont spin at all. The laptop was preinstalled with Windows 8 UEFI and safe boot on or something like that and gpt partition i guess and now i can not boot or enter in bios, how to flash bios or to install on this new hdd windows 8.
I tried everything from removing the motherboard batteryto boot from usb with bios file and Crisis files and nothing. The f2 button doesn't work and acer crisis recovery ask for wph file format and i just have rom file format.
I updated my Acer Aspire 4752g's BIOS to use the BIOS_Acer_2.10_Windows.zip in the BIOS downloads in the Acer site and when my laptop rebooted it was stuck in a black screen. I've tried doing the FN+ESC and tried all the BIOS downloads in the Acer site but it still did not work.
i was wanting to install ubunu, but i can't get into the bios without a password. someone told me it's' a administrative password. someone told me it has nothing to do with the hdd password. i need to change the order of the bootup for this to work. id rather not pay for this. i also know removing the cmos battery won't do any good either. is there a cracker or patch i can use? i was gonna download the latest software for my acer aspire m5-583p laptop but didn't because it would ask for a password.
I just buy an Acer Aspire V3-371, then I delete all partitions in HDD and install MS Windows and driver for this notebook. Everything are OK until I ugrade BIOS form v1.05 to v1.08. Now, it cannot boot to MS Windows and shows me "No Bootable Device".
I try to reinstall MS Windows, but I see a notice "Windows can't be installed on this drive" with details "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks".
The strangest thing has happened to my Acer Aspire 2930 laptop today.
I shut it down last night as I normally do, then this morning I turned it on and it wouldn't boot. It goes through BIOS and startup, but then it stops. It doesn't start loading Windows XP from the hard drive, it doesn't recognise boot CDs/DVDs. When I go into the BIOS, everything looks normal except the boot portion. There are several options there, but they don't say what they normally say. For instance, the first boot device, the hard drive, is completely invisible. What I mean is that the option is just not there, but when you move the selection around with the keyboard, you can tell it's supposed to be there. Look below for a better explanation. The other options are there, but they aren't recognising the devices. I have a friend with the exact same laptop and her BIOS shows everything as it should be. She's here now and I'm typing this on her laptop because I now have two dead computers here at home.
I don't get it. It's almost like the BIOS somehow became corrupted. I didn' t even know this could happen without attempting to flash the BIOS or something, and that's not what happened. I have never flashed the BIOS on this laptop. Not only can I not figure out what happened, there doesn't seem any way to fix it. I mean, if the laptop doesn't recognise any devices to boot from... I was thinking about taking it apart and resetting the CMOS, taking out the battery. I think that's the best I can hope for at this point.
I don't have any way of cloning the BIOS from my friend's computer so I guess the next step would be to get a new BIOS chip if the CMOS reset doesn't work? The laptop is unfortunately one month over the one year warranty. I read that there's a way to get the laptop to read an external USB floppy diskette drive regardless of the status of the BIOS, you are supposed to hold the function key plus the escape key or something when you turn on the laptop a couple of times, and then it magically reads from the floppy drive. I would have to somehow buy or get a drive, but I haven't even seen such things in years. Things I can try?
Here is what my BIOS looks like compared to my friend's:
2. IDE1 : 3. USB FDD : 4. Network Boot : 5. USB HDD : 6. USB CDROM :
My friend's: 1. IDE0 : Hitachi HTS542525K9SA00 2. IDE1 : HL-DT-ST DVDRAM GSA-T50N 3. USB FDD : 4. Network Boot : Realtek Boot Agent 5. USB HDD : 6. USB CDROM :
As you can see, there is definitely something wrong with my BIOS and I believe that's what is causing the computer not to boot.
I just got an acer aspire timeline 5810tz, which came with vista, so i was in the process of reformatting it to have XP, which i've done several times on my previous laptops. When i changed the bios to IDE, which is what i read was the correct setting (perhaps this is where my problem is?), i found that i could no longer boot the computer or access setup, bios or the boot menu. When i attempt to do any of these things, the computer just sits on the logo screen.
i'm getting fairly desperate at this point, having tried a large variety of solutions, key combos, removing the battery, etc.
What do I do? I have tried copying the files to a USB and powering on with Fn-Esc held down. After letting go of the power button and holding Fn-Esc a different screen appears after 30 seconds. I let go and have given it 30 minutes but it is not doing anything. I have read online from other people the power button should be blinking. Do I need to rename one of the files.
My Aspire M laptop will not boot due to the 'boot configuration file being invalid', at least, this is what the 'Recovery' blue screen states. The blue screen offers to 'Press Esc for UEFI Firmware settings, but is not responsive. I've tried F2, F8, F10, Alt+F10, F12, Space Bar, Delete and Break to try to activate the BIOS interface, all equally unsuccessful.
I followed the instructions to purchase recovery tools from Acer, but without being able to access the BIOS to set the boot order, I've just sunk another $25 into a laptop that doesn't work. The cost of service exceeds the cost of the laptop, so I'm inclined to continue trying to repair it myself. If it cant' be repaired, there is little chance I'll purchase a new Acer to replace it as this has been a very frustrating experience.
I have an Acer Aspire 7740-5691. The boot screen freezes with pixel distortion at the top. I've tried all the restore discs. I found where some people referenced a similar problem with other computers and they were fixed by resetting the bios. I can't figure out how to do that. There's no place for that in the boot settings option and there's no visible coin battery to temporarily remove to reset.
I got this laptop a few days ago, I currently have 7 and XP installed on it and kind of have vista...(read further down).
My 7 seemed to break today after playing around with a program called powerstrip trying to get my external monitor to show the right resolution (I've realised now the cable vga was broke, but meh) but this is not the full problem, after windows 7 failed to boot I tried to boot xp after turning it off during the windows 7 splash screen and now im stuck with a dash when I turn the laptop on (I dont know if its actully related to something I've done or not).
If I turn the laptop on a flashing dash comes on in the top right, it then stops flashing and turns into a none flashing dash further up the screen and just locks here and I cant do anything at all other than trying to restart it. When I had this problem previously (at least I think this problem) on my desktop it usualy turned out to be something usb related but I have everything unplugged (all though the bluetooth adapter light is on when it is doing this) so I realy dont know what to do...............
I have a Acer E1 522-3657 computer, which my son set-up for me but did not make the recovery disc(s). The unit is just outside of the warranty period when the hard drive failed. The hard drive just makes a clicking noise and after the logo screen appears it goes to a blue screen with a box that has the following message with in, "Default Boot Device Missing or Boot Failed. Insert recovery Media and Hit any key.....Then Select 'Boot Manager' to choose a new Boot Device or to Boot Recovery Media.
I have installed a brand-new Western Digital 1T Sata3 harddrive to replace the Toshia 750 GB original Drive. After turning the computer on and at the logo screen I press and hold F2, this takes me to the InsydeH20 Setup Utility Screen. I see under the "Information" menu that the installed harddrive model and serial number appear. I see in the "Boot" menu, Boot Mode: "UEFI" and Secure Boot: "Enabled".
Under the "Exit" menu, Exit Saving Changes is highlighted. When I press F10 a "setup Configuration" box appears asking to save configuration changes and exit now? "Yes" is highlighted to which I hit Enter and are returned to the "Default Boot Device.......page. I then hit ecs twice and are at a black screen with the message No bootable device -- Please Restart system_appearing in the upper left corner of the screen. I then push and hold the power button until the computer shuts off.
I have ordered from acer the "Acer E-recovery Media Disc Set", which is specific to the SNID of my computer. I have not attempted to format the new hard drive in any way. I assume the E-recovery Media Disc Set will handle that operation due to the multiple partitions required.
In view of the above situation, do I need to set up the computer in any way before I start to utilize the E-recovery Media Disc set. I assume the Media will be on CD's. The computer was running Win 8.0 which was updated to Win 8.1 and was running very well, very stable.
Acer V5, spilled coffee on keyboard. no problem at first, then lockup, and on restart get the No Boot Device or Boot Failed. Am using my old laptop now. Can I get a download, save it to thumb drive, and use it to restart/reboot my Acer?
i've successfuly flashed my 4810t to bios 1.10, 1.20 and 1.22.. but yesterday i tried to get to 1.23, it installed ok in windows and restarted... now it wont go past the "press f2 to enter"... i press f2 and nothing... after a few keypresses it starts to make a sound... oh and the leafy button works here...
is there anything i can do? or i must use the warranty?
Now I am not after any passwords or any thing but I think this is disgusting.
My wife has an on boot bios password and wanted to disable it. She asked me to do it because I work in IT so it shouldnt be a problem.
I logged in with her password. Went security, user password, Press enter, typed in existing one then new password blank and confirmed it with another blank password. Rebooted and now it prompts for a password and we are stuffed.
Is this me being stupid did I do some thing wrong is that not the way to do it ? Its appauling. We had a customer in work whos laptop was sent away to be sorted because he had the same problem. At the time I thought he was bit silly but now I can see how it could happen
Laptop still under warranty. I recently had a motherboard and HDD replacement. I wanted to install Windows myself, but the BIOS was set to UEFI, and I couldn't seem to boot off of a USB drive. So I switched it to Legacy, booted from the pendrive, and installed Windows just fine.
For whatever reason, I went back to try and change the setting to UEFI. Now the laptop switches on, but refuses to boot. I get a black screen, with no logo or any prompt whatsoever to access the BIOS.
I read a bit and seems I need to remove the BIOS battery, let the memory clear itself to reset BIOS settings to default, and try again? If it matters, I re-installed Windows 7 64-bit.
I recently had a motherboard and HDD replacement. I wanted to install Windows myself, but the BIOS was set to UEFI, and I couldn't seem to boot off of a USB drive. So I switched it to Legacy, booted from the pendrive, and installed Windows just fine.
I went back to try and change the setting to UEFI. Now the laptop switches on, but refuses to boot. I get a black screen, with no logo or any prompt whatsoever to access the BIOS.
I read a bit and seems I need to remove the BIOS battery, let the memory clear itself to reset BIOS settings to default, and try again? I re-installed Windows 7 64-bit.
I get the error in the Title after i tried to flash the latest BIOS update for the Z510. I can press ok and then get into the boot manager but i cant choose anything there. Also I cant boot from a Disk with e.g. XP on it.
I also tried the Inside BIOS crisis mode (fn+r) with the BIOS file on my USB drive but it doesn't work and tries to access the file on the USB drive but boots normally instead to the error again. (Couldn't try it with removed battery as I have to remove the whole back to remove the battery on the Z510).
I have loaded Kaspersky anti virus on my computer, the computer gave me a driver alert and restarted, now the bios screen does not display at start up and the hard drive light does not come on, the only thing that seems to be work is the CPU fan.
Machine is an Aspire 9301AWSMi running XP SP2 rather than Vista.
On boot, the machine shows the ACER BIOS screen but after that the display just goes blank. Have tried to boot from the Windows XP CD and the only difference is that following the BIOS screen I then get a message saying "Windows is inspecting your hardware configuration" and then a second or 2 later, back to a blank screen. No disc or CD activity.
Is this another ACER Motherboard problem or maybe a HDD failure?
After I turn on the power, the harddisk led doesn't turn on, just the CAP and NUM led flash once. The screen doesn't turn on, even the Acer logo doesn't appear. I can hear something is turning inside the notebook, but it's definitely not the harddisk.
I wonder if I had pressed some wrong buttons, and disable the notebook.
I have an acer aspire 1681wlmi which has just finished its extended 3 year warranty. The problem started by freezing upon start up on a white screen then the freeze up got quicker and quicker each time i rebooted it. Now the power on starts the hd, everything flashes like normal and after 5-6 seconds the hd stops and the hd light goes out. It wont boot from cd, it tries, the cd spins then everything goes dead again. I have tried all the previously mentioned fixes mentioned on this forum like removing battery, memory etc, i even tried to dismantle the whole thing but when it got down to the motherboard i did not want to break anything and put it back together again. I havea feeling the mother board is dead....