My original 500GB HDD + 32GB SSD has been replaced with 256GB SSD + 500GB HDD and now the HDD has been removed, leaving only the SSD.
So what is the correct setting for SATA operation in BIOS?
I just got my new 1720 Inspiron, and I had a problem when trying to create an image of the C and D drive using the Ultimate Boot CD (BART), it would never see my hard disk partitions. I changed the BIOS setting for the On Board Devices from AHCI (default) to ATA for SATA operation. I also had to change the Flash Cache Module to be disabled, it was enabled in the Factory Default. The result of these changes was good, I was able to see my C and D drive when booting from my Ultimate Boot CD. What these changes do? Should I leave my BIOS at the new setting, or will I lose performance from my hard disk?
View 5 Replies View RelatedI have a HP dv1131 TX laptop.I am not able to access SATA settings in it. I tried with the BIOS....but it doesnn't seem to display any option pertaining to SATA operation.
View 4 Replies View RelatedI have two Inspiron 17R 5720, identical?, except bios in one only shows Sata options ATA and AHCI. The other show all Sata options ATA, AHCI, and Intel Rapid Start. Both are running Bios A14.
What can be changed to make both display all three Sata options?
Is the hard drive interface SATA or SATA II?
View 10 Replies View RelatedI finally received my E6400 machine.
Later on today I will update the bios to A15.
In the meanwhile I'm looking for the optimal bios settings for best performance.
W540 20BG001CGE, had BIOS 1.05 and RAID 1 with two Samsung 840 EVO 1TB working fine under Windows 7 - x64. Did a (by lenovo update tool recommended) BIOS Update with the bios update manager to 2.05. Update ran fine. After Rebooting (and loading defaults, disabling Intel Rapid Start, Changing BIOS boot option to legacy first ... I recognized SATA Option (AHCI or RAID) in BIOS is gone. At boot Intel Matrix Storage Configuration doesnot appear anymore (where you can build RAID etc).
Boot then brings up message "missing operating system".
Downgrade to BIOS 1.05 impossible, due to ISO File on www.lenovo.com support is not system compatible, message "Lenovo Group Limited - Invalid system disk; Replace te disk, and then press any key")
(The link to the ISO File version 1.05 at the bottom of this page links a non bootable ISO image [URL]....)
Also the downgrade to BIOS version 1.08 found here [URL] .... does not work, CD also messages "Lenovo Group Limited - Invalid system disk - Replace ...").
Rewriting BIOS version 2.05 (GNET57WW) does not work (says "BIOS update not necessary").
Embedded Controller Version GMHT25WW (1.10) ME Firmware Version 9.0.22.1467. How to get back my RAID controller?
In the BIOS on my Latitude D630 there is an option for the CPU to be seen as a single processor or as two processors. The CPU is a T7500 Core 2 Duo 2.2GHz processor.
The BIOS info states that some applications may run faster when it is seen as two processors. Can anyone give me any insight into what these options actually mean in terms of PC performance ?
Also, what types of application would be impacted by the single processor or two processor options ?
I forgot my dell inspiron 1440 laptop BIOS admin password so i can not change bios settings. reset my bios admin password
View 4 Replies View Relatedi have a brand new 2 months old studio 1555. but the problem is that when ever i connect a charger the screen brightness automatically levels up and when ever i restart there after the bios settings revert back to multimedia keys first. having a bois A07.
View 10 Replies View RelatedI just upgraded my 5315 to 2 gigs ram. Now I would like to increase my video memory to more than 8 mb. Doesn't seem to be a way to do that.
Now that I have more memory, can I not? use more of it for my graphics. 8 meg isn't much memory
Recently I purchased a Dell Latitude D830 motherboard as a replacement for the damaged one in my own system.
The seller didn't tell me that the system has a customized bios and a password, instead he announced it as 'password free'. The board is working and I can enter the BIOS but all settings are locked with a password.
As the seller refuses to take it back, I need to reset the system. The first owner of the board is known and I have the service tag ready. Is there any chance to reflash an original DELL BIOS and to reset the password(s)?
I have almost applied all methods. I have checked bluetooth is enabled in the bios settings. And also I applied the method of services.msc in command prompt.
I pressed Fn + F2 during installation but bluetooth option is not going to be on. I do not think why it is giving that problem. I have uninstalled the drivers now.
I did also change 0x21C, nothing seems wrong though.What is 0x21C?
View 5 Replies View RelatedHas anyone installed a SSD drive in this model with success? If so, does the BIOS need to be upgraded? I have a Vertex 120 SSD drive I'm not using and am thinking about putting it in the Sony and installing Win 7/32 bit.
I would like for all the current functions to work such as the camera and video card. Would this be a big issue or should I just reload the original OS(XP).
Computer = HP Probook 4510S
Operating system Windows 7 professional 32bit
I press esc with startup and then F10 to change bios setting. It only allows me to change date and time setting or restore default settings. I need to enable hardware virtualization to be able to run XP mode....
I just bought used Aspire 3680 laptop, I was told it only had harddrive problem,
however It have few more problems.
1. it won't save bios settings.
2. it won't always boot sometime it takes 3-4 tries before it will boot.
3. when it finally boot it will randomly freeze after 2-10 minutes.
I try new harddrive, reset the memory, unplug the battery.
memtest shows the memory is fine.
I've been having problems with the dreaded "black screen" when starting my Yoga13 (but only somethimes!). To try and narrow it down, as there seem to be so many things that can cause this, I went into the Bios settings from "F2" and setup it up to ask for a "Power on" password before starting windows.
What I have discovered is that when the black screen occurs its BEFORE the Bios asks for the initial "Power on" password, ie I cannot see the box asking for the password and so Windows has NOT yet started to load. To overcome this, I just press the power button to switch off the system, wait 20seconds and then it will usually start.
Once past this, no errors ever occur on the windows side.
I am unable to enter Bios settings on z580 with windows 8.1. I have tried everything including holding shift with shutdown and accsesing bios within windows, nothing seems to work and windows just strarts up normally. I also can't find a update to fix this problem.
View 8 Replies View RelatedI have a Probook 4710s with WIndows 7 64-bit. I tried to overclock it, but its seems I can't acess that ''configuration'' page.. I just get to press the F10 key to acess the startup menu, and then BIOS configuration, where I can just toggle some actions etc.. no overclocking there..Is it even overclockable?
View 1 Replies View RelatedI got this Notebook-PC in 2012 it is a G7 series I am fairly sure. My problem is that when I turn off the computer and turn it back on, there is no (esc) option to open bios menu or any option for that matter. Just a blue HP symble directly in the middle of the screen with a small loading symbol below it. I have pressed esc, f1-f10, and pretty much every other key to try to access it. All I really want to do is disable the most annoying f1-f12 function keys.
I am no longer under warranty and my operating system is Windows 8. There are also no error messages at all, just no response to anything just loads up to the password login screen.
So I have bought this Acer laptop for 1 year, and it's BIOS came with V1.0 didn't have UEFI setting, the default is LEGACY. After trying updating that BIOS version to V1.13 successfully, I still don't see the UEFI setting, when I check in a software called HWiNFO64 Program, it says my laptop BIOS is capable of UEFI BIOS. So my main questions are....How can I have UEFI setting in my BIOS? What should I do?
My specs: Intel Core i7-3630QM 2.4GHz, Nvidia Geforce GT 640M 2GB, RAM 8GB, HDD 750GB, Windows 7 Ultimate SP1 x64 (Will upgrade to Windows 8.1 Pro x64 if I can change my BIOS to UEFI boot).
Since yesterday, i can not find how to go to bios setting or how to go to booting option.I have read all articles on this forum about pressing esc, f9, or f10 when notebook begin starting.But never work. All of this button never work.
Combination with fn button, but it also didn't work. Everytime i press fn+f9 or fn+f10 when notebook begin start doesn show bios or booting menu.
Does it becouse i use windows 8? My notebook is HP Mini 110-3500 with Windows 8 in it.
Then i try to search 'how to go to bios setting in windows 8', i found many articles, most of them using UEFI bios setting. But on my HP Mini there is no UEFI setting?
How to go to bios setting or how to go to booting options? i want to reinstall this HP Mini using my usb flash drive.
where is Virtualization Technology BIOS setting in aspire v5-561-6607
View 6 Replies View RelatedWe are all waiting on a refresh of the Dell Studio XPS 1645/1647 to include the 5000 series ATI graphics cards. So to get the message across I have come up with a little thing called "Operate GPU Refresh". If you have been following the iPhone/AT&T you should know of the "Operation Chokehold" that iPhone users took part in to try to get the message across the the AT&T network needs upgrading.
But instead of trying to take down Dell, we will simply be trying to get the message across to them that we want the new cards, and since every other manufacturer pretty much already offers them we "would" rather buy their competition.
On March 30th of 2010 all users who want to participate will visit the "Dell Chat" PC/Laptop sales chat and ask when the 5000 series will be available. Also chime in on the fact that competitors such as HP already have these newer graphics cards available and you are tired of waiting, and if they can't give a solid reason just say "I guess I will go with HP" or whichever company you feel is the next alternative to you.
Goal:
Get the message across that we as customers want the latest hardware.
Get the message across that Dell is lagging behind their competition and if we have to wait any longer we will forget about Dell and buy their competition (in theory).
So set your calendars for March 30th. Dell "D-Day". Us notebook review members telling Dell what we want, and that we want it NOW.
I have an Alienware M14x R1, which I recently added a Samsung 840 SSD hard drive to. I have kept the original 750GB hard drive in the laptop aswell.
I have installed Windows 8 and the laptop boots and seems to work fine. When I access anything off of the second hard drive (the original drive) the laptop slows right down, occasionally freezing. I check the Event Viewer and there are warnings appearing about every 30 seconds, here are some examples:
The IO operation at logical block address 744a158 for Disk 1 was retried.
The IO operation at logical block address 73bb0a8 for Disk 1 was retried.
The IO operation at logical block address 7291ab8 for Disk 1 was retried.
I updated the driver on the laptop to see if that would fix the problem. After installing all the drivers I found my laptop would no longer boot. I would see the WIndows loading screen (with the spinning progress indicator) and it would continue to seem like it was loading for over an hour. I then powered down the laptop, and Window detected that it failed to boot. WIndows attempted to fix itself, but failed, and I was stuck with a laptop that could only attempt to boot then failed repairing itself.
I reformatted an started again. I was having the same slow access problems to the second hard drive and seeing exactly the same message in the Event Viewer. This time I installed the driver one at a time, rebooting after each. I found that when I installed the latest version of the 'Intel Rapid Storage Technology' driver, my computer failed to boot.
Am I supposed to be using a different version of the Rapid Storage Technology driver?
I just flashed BIOS on my thinkpad yoga 20CD00B1US. I got the lates BIOS 1.18/1,09 and sice this flash, I cannot make any changes in BIOS. I can list in BIOS but cannot highlite and change any setting expect quick boot Enabled/Disabled
My even manager is reporting me this warrining: : The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the operating system. This data will be ignored. No further action is necessary; however, you should check with your computer manufacturer for an upgraded BIOS.
I do have set up supervisor password for BIOS, password on power on. When going in BIOS, I am not asked to put password in, which could be the issue.
Which settings are optimum to allow a downgrade to MS Windows 7 on a HP Envy 17 TouchSmart J023CL laptop where the BIOS is F.43?
View 1 Replies View RelatedI have a Gateway NE71B a friend gave me and it has Windows 8 installed. I had to do some repair to it after a drink was spilled into it but I cleaned it out and its been fine, sorta...
Resuming from sleep doesn't work. It is just black. I have to shutit down and that works fine. It appears that a BIOS upgrade is needed and I downloaded the latest BIOS and tried to update it. It uses some 'InsideH2O' update app. Well it goes to reboot and when it tries to apply the BIOS, it keeps saying that it is an invalid firmware image. I've verifiedd that this is the correct BIOS file. I tried other BIOS versions and none will apply, always getting the error. I've researched the utility, extracted the config and BIOS. I'm tempted to tell it to write without verify (its that fustrating).
One option, that seems to saved most people is to disable Secure Boot. No matter what, I cannot do this. It never saves. I followed the official steps of powering off, then power on, set the admin password, disable Secure Boot, save and exit. Secure Boot always stays enabled. I've tried probably 30 times, 10 different ways and it just won't stick. I also noticed that I cannot change other settings in the BIOS. I can set some to a different value but they always revert back. I cannot get the function keys setting to stay on Function Keys. It always defaults back to Special Keys after reboot. Same thing goes with enabling F12 for boot menu.
I've tried removing the coin battery, which has a charge, shorting out the contacts holding it for about a minute, removed power battery and power cable, letting it sit but still no good. I've also tried removing the hard drive. Where is the BIOS data being stored and can it be wiped?
I've been considering getting an Acer laptop but this is starting to steer me away. Definately not getting a Gateway.
I recently bought a lenovo Y510P and did a clean windows 7 64-bit installation. Yesterday I reset my BIOS Setting to the default settings and now it doesnt reconise any of my hard drives or usbs anymore. The only thing I can boot from are (I think) the network cards?..
View 1 Replies View Related