My computer doesn't seem to start up anymore. It only enters the "Boot menu" tab with no further information. When I'm trying to press "Enter" it just returns back to same screen again. Is my harddrive broken? Is there some reset button available anywhere on the device?
View 2 RepliesRunning Windows 8.1 for some time, but latest updates (8/13/14) cause the problem. Restore point and shutting down updates allows use, but it's a short term fix.Which update causes the paroblem?
View 7 Replies View Relatedi can't boot on an USB key, the secure boot is desabled and when i press enter to boot on the USB key nothing happen. I had tested with 3 different usb key and 2 different OS. And it work on other laptop i have a lenovo twist... i think its in the BIOS but i had check all options
View 2 Replies View RelatedI have disabled the secure boot and changed the boot to Legacy Only.It still doesn't work.I have also tried updating my bios to the latest version using the Lenovo Solution Center.
View 3 Replies View Relatedis there any possibility to make boot from SD Card on Lenovo Thinkpad Yoga?
I have live linux image, but there are no optical drive on system, so I would be glad to use the SD Card slot. When start with boot selection, there no SD Card slot listed even if I have the bootable SD Card inserted into. On other system the same card booting properly.
Are there some bois settings to allow booting from SD Card slot, so it will be included in boot device list? The same system boot from USB, but USB consume one USB port, so the SD Card is more preferable option.
I am trying to disable UEFI Secure Boot on my Thinkpad Yoga S1 but it keeps getting re-enabled after a reboot. If I set secure boot to disabled I can boot into the non secure OSes installed on the machine imediately afterwards but if the machine is restarted the Secure Boot seting in the BIOS is re-enabled. It's important for me to have secure boot disabled as I use OSes without secure boot.
I try to disable Secure Boot in the BIOS on the following screen :
Link to image 1
But if I re-enter the BIOS either after booting into an OS or simply re-entering the BIOS, Secure Boot is back on:
Link to image 2
I have also tried to disable "OS Optimzed Defaults" but it also returns to enabled after a restart.
Link to image 3
Some of the other BIOS settings save correctly so I can't figure out why the secure boot settings don't. The BIOS version I have is the latest (1.18).
It's inconvenient to manually disable secure boot each time I want to use the laptop. The two operating systems (Ubuntu and Android x86) do work reasonably well once booted.
I just purchased a refurbished Thinkpad Yoga, and all was great for a little while. Then I decided to shut it down and set it aside for a few minutes.
Current Status: System responds in no way other than the 'i' light (in the Thinkpad logo) blinking three times when the charger is connected, or the same when the reset button is pressed while the charger is still connected. Nothing else illicits any sort of beep, light, or otherwise.
I have a Thinkpad Twist. I started it up and got a thermal sensing error before the boot screen. I looked up the error on various forums, tried turning it off to see if the message would still be there. When I rebooted it, it went away. Should I still be concerned for the fan or CPU?
My laptop has been overheating before this, but it's never shut itself down, even after the error message.
For the past couple of weeks I haven't been able to use my lenovo s230u twist. I can turn it on, I can get to the "lenovo, to interrupt norml startup press enter." But then the screen goes black. Then I get to the windows boot manager, where i get some options. [URL] ....
View 2 Replies View RelatedI have bought Lenovo Essential G580 (59-324061) Laptop (3rd Gen Ci5/ 4GB/ 500GB/ DOS) on Feb 2013, its out of warranty now.
I have installed Ubuntu in the laptop, not sure how i formatted the hard disk during installation. I guess it was full format of hard disk during installation (while selecting hard disk).
Till today everything was working fine. From today morning, there is always a Boot menu which is being displayed with following options:
1. ubuntu
2. PCI LAN: Atheros Boot Agent
3. ATA HDD: ST500LT012-9WS142
4. ATAPI CD: MAT**bleep**A DVD-RAM UJ8D1
I have pressed enter in both Ubuntu and ATA HDD options. But after a brief duration the control comes back to the same menu I have specified before. How to boot to ubuntu.
I am having a bit of trouble with this G580 lenovo laptop, which can't boot.
Problem: HDD and CD/DVD is visible in info tap in bios, however they are not visible in the boot tap, only EFI network IP4 and IP6 are visible.
I tried switching the HDD at first just to make sure if it would do anything, but did not work, so i switched back. so what to do.
The bios version installed is V9.01 .......
I've got the 12inch thinkpad yoga. The left shift key works intermittently. This started happening to me a couple of weeks ago (I've had the computer since December and haven't noticed a problem. I sent it in twice and supposedly, they replaced the whole machine this last time, but I'm still having the problem. Could this be a fault in this model in general?
View 2 Replies View Related[URL]
The label on the charger says:
MODEL 45N0261
FRU P/N 45N0262
Lenovo P/N 36200253
It was advertised as X1 charger, but when it arrived I thought it's too small in size, so I googled it. Having done that, I've realised it's actually being sold by Lenovo as a charger for Yoga.
Am I safe to use this charger for my ThinkPad X1 Carbon (3460-CLG)?
Is there a possibility of installing a 3G/LTE module on the Thinkpad Yoga? To my understanding there is an m.sata slot on the Yoga that allows for us to put extra SSD hard drives on it. Is it possible to replace it?
If not, are there other methods other than using usb-dongles or hotspots?
I would upgrade the ram from 8 to 16 gb.
My pc is ThinkPad s430, model 33643DG, manufacturer code N3BDIX. Core i7-3520M, chipset HM77 Express, OS windows7 PRO.
I want to upgrade with Kingston Hyperx KHX16S9P1K2 /16, but I would like to know if any user has already tried these ram.
two days ago my Lenovo Twist S230u laptop started to freeze a lot, especially when I tried to multitask (like switching to a separate window). It probably took ten minutes each time for the computer to unfreeze and continue.
the in-built 'Lenovo Solutin Center' software ran an automatic diagnostic test, and said that the laptop failed the SMART short-self test (unfortunately I forgot to copy the error code). I didn't think much of it at the time since my laptop is only 5-months old. Just in case, I performed a disk cleanup, disk defrag and made sure everything is up to date. This was when the laptop began to freeze quite a lot. In desperation (and stupidity), I typed the chkdsk /r command in command prompt and asked it to run at reboot. Apparently the SMART short self test is a physical problem rather than a software problem, so obviously chkdsk won't work.
chkdsk ran for about two days now which is clearly too long for a 500gb HDD laptop. I've only used about half of this space too. I forced a shut down and now I cannot access Windows 8.1 through the boot menu (it just hangs on a black screen). Loading a rebootable USB recovery drive is not doing anything too.
I previously sought support on the Microsoft Answers website. They said that my 'hard disk is failing' and I will need to have my HDD replaced.I just want a second opinion here. Is warranty valid under this circumstance? From what I remember, 'Lenovo Solution Center' said I still had a few hundred days of warranty left on the machine.
I have a problem we need to fix because it shutdowns production. The Up and Left Navigation keys, and the Del Keys (Ent in German) do not work properly. We have press for about 5 long seconds to make them work.All stuffn Ease of Access,Keyboard is turned off and does not solve the solution.
Problem exists on IE, Word, Excel.
Thinkpad Yoga S1 20C0S0AX0
T61, UZ2AQGE 2.5 Ghz, XP Pro SP3
T400s, NSF20UK, 2.4 GHz, SSD 128 GB, Vista B
Some texts look blurry on some windows. I have attached a picture to show you what I mean. If you see "Device Manager" window, the text is blurry. On the other "System" window, the text is just fine.
Link to image...
I have S430, bios 2.58 I decided to upgrade my HDD to SSD and install clean Windows on it.
I've downloaded Windows 7 ISO from [URL] ....
Then I have loaded it into Windows 7 USB DVD Download Tool
Prepared with that app bootable DVD and flash
First I tryied to install Windows from usb, installer runs and asked me for CDDVD drivers. I sat up USB3.0 to disabled, then in browser window I can see my flash, but the message about drivers remains..
Also I copyed USB3 driver from [URL] ... to another flash and tryed to give them instead of CD-DVD drivers, but they are shown as "not compatible"
Next i tryied with DVD, but I can't even load installer - DVD begin to roll, but then shows me "choose boot device" dialog. Secure boot is OFF, UEFI tryied both Legacy Only and UEFI only....
I've just bought thinkpad s540 with 1tb hdd and win8. Tomorrow i'll get m.2 128gb ssd and i'm planning to tranfer windows on it. I did nothing with OS, recovery partition is on it's place.
What should i do after replacing ssd cache with new ssd drive, step-by-step?
I have 13" thinkpad yoga that will not auto rotate in any mode, this macine is new and the auto rotate function has never worked.
View 2 Replies View RelatedI have had this laptop for 7 months now, but since about 4 weeks ago when i click on shutdown i realised that it looked like it was shutting down... and 30 seconds later would fire up again. At first i thought it was me clicking the wrong button, but it has happened daily now. Only way to shut it down is my removing the power cable and then shutting down.
View 6 Replies View RelatedS440. I prefer to use the function keys F1-F12 without using the Fn key. It seems like in other models there is an option in the BIOS to change this, but not on my machine. Also the Lenovo software nor Windows configuration seems to be able to change this. Is there anyway to do this?
View 3 Replies View RelatedNo matter what settings are used in Lenovo settings, my display turns piss yellow after boot up. Then I have to manually change it back to normal. How do I disable that paper display?
View 1 Replies View RelatedI followed all steps here----> [URL] .... and still getting black screen after all. What should i do next...
View 4 Replies View RelatedMy twist s230u wont turn on although when i plug in the green light indicate that it is charging .....
I found that i have to remove the battery then power on for 30 times but the twist s230u battery cant be removed ....
By the way i found there is a reset button under the laptop , but i don't now long should i keep pressing it because nothing happened ....
I only bought the one link pro to connect my Thinkpad Yoga 2 to my Samsung monitor with WQHD-Display with 2.560 x 1.440 Pixel. Lenovo told me that this is possible. With DVI I only get the maximum 1920 x 1200 which makes round circles look like eggs...
I need the full resolution.
I there any configuration, cable, display port instead of DVI cable?
(I have the newest, best, DVI cable (forgot the specification for high resolution DVI cable, ports)).
I just flashed BIOS on my thinkpad yoga 20CD00B1US. I got the lates BIOS 1.18/1,09 and sice this flash, I cannot make any changes in BIOS. I can list in BIOS but cannot highlite and change any setting expect quick boot Enabled/Disabled
My even manager is reporting me this warrining: : The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the operating system. This data will be ignored. No further action is necessary; however, you should check with your computer manufacturer for an upgraded BIOS.
I do have set up supervisor password for BIOS, password on power on. When going in BIOS, I am not asked to put password in, which could be the issue.
I have lenovo s540 . I installed own original version win 8.1. I have problem with some functional keys. Especially with
F4- Microphone muteF8 - manage wireless connection F9 -settingsF10- win searchF11 - view programs that are openedF12 - view all the programs
I think thats I need driver but I dont know which .
The battery icon in Windows 8 just started saying "No battery is detected".
The system seems to run fine on the battery. I tried rebooting, but that did not change anything.
When plugged in, the icon shows that it is plugged in, but still says "No battery is detected".
It does not look like I can remove and replace the battery without taking things apart.