For the past couple of weeks I haven't been able to use my lenovo s230u twist. I can turn it on, I can get to the "lenovo, to interrupt norml startup press enter." But then the screen goes black. Then I get to the windows boot manager, where i get some options. [URL] ....
View 2 RepliesMy twist s230u wont turn on although when i plug in the green light indicate that it is charging .....
I found that i have to remove the battery then power on for 30 times but the twist s230u battery cant be removed ....
By the way i found there is a reset button under the laptop , but i don't now long should i keep pressing it because nothing happened ....
two days ago my Lenovo Twist S230u laptop started to freeze a lot, especially when I tried to multitask (like switching to a separate window). It probably took ten minutes each time for the computer to unfreeze and continue.
the in-built 'Lenovo Solutin Center' software ran an automatic diagnostic test, and said that the laptop failed the SMART short-self test (unfortunately I forgot to copy the error code). I didn't think much of it at the time since my laptop is only 5-months old. Just in case, I performed a disk cleanup, disk defrag and made sure everything is up to date. This was when the laptop began to freeze quite a lot. In desperation (and stupidity), I typed the chkdsk /r command in command prompt and asked it to run at reboot. Apparently the SMART short self test is a physical problem rather than a software problem, so obviously chkdsk won't work.
chkdsk ran for about two days now which is clearly too long for a 500gb HDD laptop. I've only used about half of this space too. I forced a shut down and now I cannot access Windows 8.1 through the boot menu (it just hangs on a black screen). Loading a rebootable USB recovery drive is not doing anything too.
I previously sought support on the Microsoft Answers website. They said that my 'hard disk is failing' and I will need to have my HDD replaced.I just want a second opinion here. Is warranty valid under this circumstance? From what I remember, 'Lenovo Solution Center' said I still had a few hundred days of warranty left on the machine.
I got a new Twist a couple of days ago. When in tablet mode, the mouse pointer will come up and start moving around the screen. I think it may be one of two things. 1. The ghost of my former laptop is haunting the Twist or 2. The keyboard/mouse is not disabled in tablet mode and the back of my screen is causing the movement when I am using it in tablet mode. Is there a setting to disable the keyboard/mouse in tablet mode or am I the only one having this problem.
View 9 Replies View RelatedI want to upgrade my S230u with the 500GB HDD to a 7mm 2,5" 480GB SSD (Corsair Force GS 480GB SATA3).
I am wondering how can I later on clone my OS from the HDD to SSD? Is it possible to plug the SSD in over USB, use some tool to clone the entire disk (including the recovery partition) and then simply switch to SSD?
Also, once I do that, how do I disable express cache and ideally disable using the built-in 24GB SSD? I am not interested in IRST as I tend to use hibernation a lot.
i can't boot on an USB key, the secure boot is desabled and when i press enter to boot on the USB key nothing happen. I had tested with 3 different usb key and 2 different OS. And it work on other laptop i have a lenovo twist... i think its in the BIOS but i had check all options
View 2 Replies View RelatedI have disabled the secure boot and changed the boot to Legacy Only.It still doesn't work.I have also tried updating my bios to the latest version using the Lenovo Solution Center.
View 3 Replies View Relatedis there any possibility to make boot from SD Card on Lenovo Thinkpad Yoga?
I have live linux image, but there are no optical drive on system, so I would be glad to use the SD Card slot. When start with boot selection, there no SD Card slot listed even if I have the bootable SD Card inserted into. On other system the same card booting properly.
Are there some bois settings to allow booting from SD Card slot, so it will be included in boot device list? The same system boot from USB, but USB consume one USB port, so the SD Card is more preferable option.
The problems still exist after I do a fresh restore with Lenovo DVDs. Also ran the Lenovo Update & Driver utility.
1. My W530 wont boot or start if I have a External drives plugged in. It stucked at "ThinkPad" screen. I have to unplug the external drive and press/old power button to shut it down. Same thing happened when the laptop is docked.
=> Contacted the technical support today. They told me I have to unplug and plug it back in everytime. I told him that there is a reason I got the dock station so I don't have to unplug and plug my external drive every time.
2. I have no problems booting if thumbs drive plugged in. But it keep "Auto run" everytime I turn on the machine.
I do not have this problem with my W500 and W510.
W530, Intel Core i7-3820, 32G DDR3 RAM, 180G Intel SSD, Windows 7 x64, NVIDIA Quadro K2000M.
I am trying to disable UEFI Secure Boot on my Thinkpad Yoga S1 but it keeps getting re-enabled after a reboot. If I set secure boot to disabled I can boot into the non secure OSes installed on the machine imediately afterwards but if the machine is restarted the Secure Boot seting in the BIOS is re-enabled. It's important for me to have secure boot disabled as I use OSes without secure boot.
I try to disable Secure Boot in the BIOS on the following screen :
Link to image 1
But if I re-enter the BIOS either after booting into an OS or simply re-entering the BIOS, Secure Boot is back on:
Link to image 2
I have also tried to disable "OS Optimzed Defaults" but it also returns to enabled after a restart.
Link to image 3
Some of the other BIOS settings save correctly so I can't figure out why the secure boot settings don't. The BIOS version I have is the latest (1.18).
It's inconvenient to manually disable secure boot each time I want to use the laptop. The two operating systems (Ubuntu and Android x86) do work reasonably well once booted.
I just purchased a refurbished Thinkpad Yoga, and all was great for a little while. Then I decided to shut it down and set it aside for a few minutes.
Current Status: System responds in no way other than the 'i' light (in the Thinkpad logo) blinking three times when the charger is connected, or the same when the reset button is pressed while the charger is still connected. Nothing else illicits any sort of beep, light, or otherwise.
My computer doesn't seem to start up anymore. It only enters the "Boot menu" tab with no further information. When I'm trying to press "Enter" it just returns back to same screen again. Is my harddrive broken? Is there some reset button available anywhere on the device?
View 2 Replies View RelatedI have a Thinkpad Twist. I started it up and got a thermal sensing error before the boot screen. I looked up the error on various forums, tried turning it off to see if the message would still be there. When I rebooted it, it went away. Should I still be concerned for the fan or CPU?
My laptop has been overheating before this, but it's never shut itself down, even after the error message.
Some texts look blurry on some windows. I have attached a picture to show you what I mean. If you see "Device Manager" window, the text is blurry. On the other "System" window, the text is just fine.
Link to image...
I have S430, bios 2.58 I decided to upgrade my HDD to SSD and install clean Windows on it.
I've downloaded Windows 7 ISO from [URL] ....
Then I have loaded it into Windows 7 USB DVD Download Tool
Prepared with that app bootable DVD and flash
First I tryied to install Windows from usb, installer runs and asked me for CDDVD drivers. I sat up USB3.0 to disabled, then in browser window I can see my flash, but the message about drivers remains..
Also I copyed USB3 driver from [URL] ... to another flash and tryed to give them instead of CD-DVD drivers, but they are shown as "not compatible"
Next i tryied with DVD, but I can't even load installer - DVD begin to roll, but then shows me "choose boot device" dialog. Secure boot is OFF, UEFI tryied both Legacy Only and UEFI only....
I've just bought thinkpad s540 with 1tb hdd and win8. Tomorrow i'll get m.2 128gb ssd and i'm planning to tranfer windows on it. I did nothing with OS, recovery partition is on it's place.
What should i do after replacing ssd cache with new ssd drive, step-by-step?
I'm very stuck with my Y580, and I'll start by saying that I purchased the laptop about 1.5 years ago, and it came with Windows 8 installed. I didn't like Windows 8 so much, so I decided that I would get Win7. I also decided that I'd put it on an mSATA to speed things up. After doing so, I just formatted the boot partition on the older drive to use for storage. But I kept the recovery partition on there. Everything seemed to work fine until I was recently informed that I should update the BIOS. I followed all of the instructions from Lenovo in updating to the version 8.00, something like 89WW in the file name. Then recently I noticed my temps were realllly hot when gaming... and I don't play graphically demanding games. I monitored my temps and found out that my CPU (i73630QM) was running over 90°c when playing games like LoL, Dishonored, RIFT, Darksiders, and a few others, all on lower settings.
I did some googling about temps and a lot of people were saying that BIOS is often a culprit for high temps. Maybe you've already put two and two together, but it took me until this point to discover that the BIOS I had updated to is a Win8 BIOS, and I'm using Win7. I figured, this is probably a big part of my issue (and even if it's not going to solve the heat issue, I'd still like to have all my ducks in a row and have all my hardware/software/firmware compatible.
As we all very well know from the few years of tampering with these Y580s, the BIOS can't simply just be rolled back. But I figured there had to be a way. After googling around for some time, I ended up trying a few different things; editing the Config file for the earlier version of the Bios (which just resulted in another error and locked up the keyboard and mouse), I tried booting the BIOS image from a USB, but to no avail (I tried both booting from USB and also a force BIOS update, using the fn+B method, which I realize I may be doing incorrectly, as I am not entirely sure what I should name the ROM file... I can't boot windows to use ANDYSTOOL, so I named a bunch of different ROM files with different names that have worked for other people) ... so on and so forth...
The last thing I've tried was Restoring the BIOS to factory settings (within the BIOS) and now the computer will not boot windows. The Lenovo screen Posts, and Windows starts to load, freezes a moment, Blue Screens for a second, then reboots, saying that there is an issue with either Hardware or software, and gives me he option to either boot windows normally (which just results in the same thing again) or to run an automatic repair. I tried the automatic repair and it just sits on the "Preparing Automatic Repair" screen, and will do so for hours with no progress.
The battery icon in Windows 8 just started saying "No battery is detected".
The system seems to run fine on the battery. I tried rebooting, but that did not change anything.
When plugged in, the icon shows that it is plugged in, but still says "No battery is detected".
It does not look like I can remove and replace the battery without taking things apart.
After upgrading to Win 8.1 and trying to create the usb recovery drive, I get this error:"We can't create a reccovery drive on this PC. Some required files are missing.To trouble shoot problems when your PC starts,use your window installation disk or media".
View 2 Replies View RelatedRunning Windows 8.1 for some time, but latest updates (8/13/14) cause the problem. Restore point and shutting down updates allows use, but it's a short term fix.Which update causes the paroblem?
View 7 Replies View RelatedI have a brand new Thinkpad Yoga (20CD-CT01WW), running windows 8.1 64-bit, 8g RAM. Intel Core i7-4600U @ 2.10Ghz / 2.70Ghz
When using any program in desktop mode (first noticed it on Chrome, then Quicken, but really applies to any use), the cursor will randomly jump across the screen, usually to the upper right, and then without clicking, will close the window I'm working on, often losing my work. Sometimes I'll get random right-click menus without clicking the mouse buttons. I am using the track-point primarily, so thinking it might be inadvertent contact with the touchpad, I disabled all touch-pad functionality, but the problem persists.
I ran Norton Internet security, AdAware, and Malwarebytes to look for viruses but didn't find any problems. Just ran Lenovo update, and downloaded the most recent Ultra-Nav Driver. Now both touch-pad and track-point are using default settings, but the problem still persists.
I'm wondering if this a hardware or driver problem, or a windows 8.1 problem?
I have an S440. I've had it for one week. Two days ago I downloaded the Windows 8.1 update from the store. Since then, when I start up the computer, it doesn't even taken me to the 'sign in' screen. There's just a black screen. When I move the cursor, it briefly appears, flickers, then disappears again.
I understand this is an issue with the graphics drivers. So I ran Windows in safemode and disabled Intel R HD Graphics family and AMD Radeon HD 8600 series graphics drivers.
This, unfortunately, hasn't fixed the problem. It still boots to a black screen with an occasionally flickering cursor. I'm currently running in safemode.
when I try to install the Windows 8 copy I got with my Lenovo S440 in a virtual box environment
the installation procedure hangs on the windows splash screen. I never saw a Windows 8 installation
procedure before, so I booted my laptop from the installation media to check if it is corrupted.
This works fine. A loading dot circle is displayed under the logo after a few seconds and than after quiet
a while the lenovo wizard is shown... so it has to be an issue with the virtual box.
I attached a screenshot to show you where it hangs.
I got my W540 recently with windows 8.1 pro on it. but as all engineers worst nightmare windows 8 has hard time with engineering softwares (for my case TIA Portal for PLC programming software which only support windows 7). so i need to have a windows 7. i prefer to keep my windows 8 and have dual boot system with windows 7 added. But i can't install windows 7. initially due to disk type (GPT), then i changed it to MBR without losing my files (which only was possible if i had deleted the recovery partition- now my recovery is on my flash drive). But there are already 4 partitions on the system (1 for C: drive and 3 for recovery and system files which came originally with the product) , how can i install a windows 7? i can't add another partition because that makes my disk a Dynamic disk. i really need windows 7 on my system ASAP.
View 9 Replies View RelatedI made sure the machine was not in sleep or hibernation mode, and the user states the machine was fine a few hours ago.
I removed the hard drive but that did not change the behavior...
After updating to brand new BIOS from Jan. 19th I cannot boot anymore into Windows 8.1 - always get INACCESSIBLE_BOOT_DEVICE. Tried to repair using a Windows 8.1 USB Stick, no success. Even downgrading to 1.08 did not work as well!
View 1 Replies View Relatedif Power Manager is available for New X1 Carbon (Window 8.1, 64bits)? So far not available, right?
View 2 Replies View RelatedUsing Defender Offline "Beta" as instructed on MS website for Windows8.1. Created the media on a USB drive, then on a CD. Manually selected boot device on the boot sequence page. Followed all the instructions to the letter, but the Defender Offline media won't boot on this new W540, either on USB flash drive, or on the CD drive.
View 2 Replies View RelatedI bought a new X1 Carbon (20A7) a week ago and from time to time the laptop gets stuck on the ThinkPad splash screen when booting. I have to hold the power button to turn it off and then it boots fine. My brother has this problem with T540p, although this happens to him a LOT more often (also, if he waits patiently for 10-20 minutes, the system boots eventually, I havent tried that on my X1).
It doesn't matter if the AC is connected, whether there is something connected to USB ports, whether it was a restart or just normal boot, there is no pattern that I can see, this seems random. We tried updating the BIOS to the newest version, our USB ports are not bent or anything, the SSD with the OS is set as the first boot device. This still happens. I see there are more people with thinkpads who have the similar problem, but their solutions do not apply (if there were any).
I have a problem with my Lenovo ThinkPad X300 computer. The battery charging stuck at 99% (remaining capacity about 69% and 300 cycles). The Power Manager displays, the battery is at 100% but "status" periodically changes - both Power Manager and Windows battery indicator - between "No activity" and "Charging".
Every time stuck at the same "Remaining capacity". As i noticed during battery user windows and the Power Manager displays different information about the remaining battery level and time.