After upgrading to Win 8.1 and trying to create the usb recovery drive, I get this error:"We can't create a reccovery drive on this PC. Some required files are missing.To trouble shoot problems when your PC starts,use your window installation disk or media".
View 2 RepliesToday I received my new worklaptop, a W540 with Windows 8 installed.
The first think I wanted to do was to create recovery media (I'm going to re-install on a SSD). However, trying to run the Windows 8 "Create recovery media" tool, as sugested by Lenovo, results in the following:
The option "Copy the recovery partition ..." is grayed out, and I can not select it. Pressing Next results in the following:
when I try to install the Windows 8 copy I got with my Lenovo S440 in a virtual box environment
the installation procedure hangs on the windows splash screen. I never saw a Windows 8 installation
procedure before, so I booted my laptop from the installation media to check if it is corrupted.
This works fine. A loading dot circle is displayed under the logo after a few seconds and than after quiet
a while the lenovo wizard is shown... so it has to be an issue with the virtual box.
I attached a screenshot to show you where it hangs.
I just bought a G505. The Control Panel option for creating a recovery drive ony seems to offer USB flash drive as an option.
Is there a way I can create a recovery CD-ROM?
I recently bought a T530 with Windows 8 pre-installed. I want to create recovery disc(s). However, in the "Create a recovery media" wizard, I don't have the option of selecting DVDs if tick the option "Copy the recovery partition to the media". I have a bunch of DVDs lying around and I would like to use them. Not to mention that I don't intend to buy USB drive just for this purpose.
View 9 Replies View RelatedOne Key Recovery (Windows 8) doesnt give an option to create a recovery disk.
View 1 Replies View RelatedI was able to install a new: PNY Optima SSD7SC240GOPT-RB 2.5" 240GB SATA III Internal Solid State Drive (SSD) in my ThinkPad X220 model 4287. I installed the latest BIOS before the upgrade and did a clean install of Windows 8.1 Pro. The installed went smooth with no issues. I proceeded in installing all Drivers and utilities. Then I noticed that when I restart Windows, the BIOS does not recognize the drive and proceeds to try to boot from the Network, Intel Boot Agent. It does not seem to recognize the SSD drive.
The only way I can get it to boot from windows again is to TURN OFF using the power button and then turning it back ON. I tried the Lenovo SSD firmware update utility to see if my drive needed an update but it did not find any update for my drive. I also tried to the PNY support site and downloaded the firmware update to see if it found any updates for my drive and none where available. I hope LENOVO can release an update to their SSD firmware update tool to fix my problem. I am also not sure if any of the utilities that I installed may be the root of the problem. So right now the only way I can get Windows to load is to turn off and turn back on the laptop. Windows restarts will not work.
I would like to restore my laptop to factory settings after butchering the factory install. I see the "LENOVO" volume as Drive D, and it appears to have the restore tools, but I cannot figure out how to get to One Key Recovery. I've tried rebooting while pressing F2 or F11 repeatedly; F2 gets me to BIOS, F11 doesn't seem to do anything.
View 2 Replies View RelatedI would upgrade the ram from 8 to 16 gb.
My pc is ThinkPad s430, model 33643DG, manufacturer code N3BDIX. Core i7-3520M, chipset HM77 Express, OS windows7 PRO.
I want to upgrade with Kingston Hyperx KHX16S9P1K2 /16, but I would like to know if any user has already tried these ram.
I just flashed BIOS on my thinkpad yoga 20CD00B1US. I got the lates BIOS 1.18/1,09 and sice this flash, I cannot make any changes in BIOS. I can list in BIOS but cannot highlite and change any setting expect quick boot Enabled/Disabled
My even manager is reporting me this warrining: : The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the operating system. This data will be ignored. No further action is necessary; however, you should check with your computer manufacturer for an upgraded BIOS.
I do have set up supervisor password for BIOS, password on power on. When going in BIOS, I am not asked to put password in, which could be the issue.
I just ordered myself an S430 with a 128gb SSD HDD included. I didn't see an option to replace the optical drive with a secondary HDD (e.g. a 500gb) so have the optical drive in as standard. Now, I would have rather changed this out for a secondary HDD or for a Blu-Ray drive, thinking I could do this myself once bought...Looking at other posts it looks like you can swap out the optical drive for a Blu-Ray drive, although I would preferably get a secondary drive over the Blu-Ray, but I'm hesitant over a few things:
Is this possible to do myself (swapping out for either secondary HDD or blu-ray drive) without voiding the warranty? (I got it with 2 year warranty). Is it actually possible to do at all? (swapping out for a secondary HDD)....
I want to upgrade my S230u with the 500GB HDD to a 7mm 2,5" 480GB SSD (Corsair Force GS 480GB SATA3).
I am wondering how can I later on clone my OS from the HDD to SSD? Is it possible to plug the SSD in over USB, use some tool to clone the entire disk (including the recovery partition) and then simply switch to SSD?
Also, once I do that, how do I disable express cache and ideally disable using the built-in 24GB SSD? I am not interested in IRST as I tend to use hibernation a lot.
Some texts look blurry on some windows. I have attached a picture to show you what I mean. If you see "Device Manager" window, the text is blurry. On the other "System" window, the text is just fine.
Link to image...
I have S430, bios 2.58 I decided to upgrade my HDD to SSD and install clean Windows on it.
I've downloaded Windows 7 ISO from [URL] ....
Then I have loaded it into Windows 7 USB DVD Download Tool
Prepared with that app bootable DVD and flash
First I tryied to install Windows from usb, installer runs and asked me for CDDVD drivers. I sat up USB3.0 to disabled, then in browser window I can see my flash, but the message about drivers remains..
Also I copyed USB3 driver from [URL] ... to another flash and tryed to give them instead of CD-DVD drivers, but they are shown as "not compatible"
Next i tryied with DVD, but I can't even load installer - DVD begin to roll, but then shows me "choose boot device" dialog. Secure boot is OFF, UEFI tryied both Legacy Only and UEFI only....
I've just bought thinkpad s540 with 1tb hdd and win8. Tomorrow i'll get m.2 128gb ssd and i'm planning to tranfer windows on it. I did nothing with OS, recovery partition is on it's place.
What should i do after replacing ssd cache with new ssd drive, step-by-step?
The battery icon in Windows 8 just started saying "No battery is detected".
The system seems to run fine on the battery. I tried rebooting, but that did not change anything.
When plugged in, the icon shows that it is plugged in, but still says "No battery is detected".
It does not look like I can remove and replace the battery without taking things apart.
Running Windows 8.1 for some time, but latest updates (8/13/14) cause the problem. Restore point and shutting down updates allows use, but it's a short term fix.Which update causes the paroblem?
View 7 Replies View RelatedI have a brand new Thinkpad Yoga (20CD-CT01WW), running windows 8.1 64-bit, 8g RAM. Intel Core i7-4600U @ 2.10Ghz / 2.70Ghz
When using any program in desktop mode (first noticed it on Chrome, then Quicken, but really applies to any use), the cursor will randomly jump across the screen, usually to the upper right, and then without clicking, will close the window I'm working on, often losing my work. Sometimes I'll get random right-click menus without clicking the mouse buttons. I am using the track-point primarily, so thinking it might be inadvertent contact with the touchpad, I disabled all touch-pad functionality, but the problem persists.
I ran Norton Internet security, AdAware, and Malwarebytes to look for viruses but didn't find any problems. Just ran Lenovo update, and downloaded the most recent Ultra-Nav Driver. Now both touch-pad and track-point are using default settings, but the problem still persists.
I'm wondering if this a hardware or driver problem, or a windows 8.1 problem?
I am going to install a SSD in my G510 and would like to know if it is possible to create a recovery DVD as my usb has only 100gb remaining and a full system back-up takes 288gb
View 3 Replies View RelatedFor the past couple of weeks I haven't been able to use my lenovo s230u twist. I can turn it on, I can get to the "lenovo, to interrupt norml startup press enter." But then the screen goes black. Then I get to the windows boot manager, where i get some options. [URL] ....
View 2 Replies View RelatedI have an S440. I've had it for one week. Two days ago I downloaded the Windows 8.1 update from the store. Since then, when I start up the computer, it doesn't even taken me to the 'sign in' screen. There's just a black screen. When I move the cursor, it briefly appears, flickers, then disappears again.
I understand this is an issue with the graphics drivers. So I ran Windows in safemode and disabled Intel R HD Graphics family and AMD Radeon HD 8600 series graphics drivers.
This, unfortunately, hasn't fixed the problem. It still boots to a black screen with an occasionally flickering cursor. I'm currently running in safemode.
I have an Aspire V3-772G. I can't create a recovery drive anymore. I ran reagentc.exe in command-prompt and it's pointing to the correct recovery location, but Windows RE is disabled and for some reason I can't reenable it.
Here are some screenshots to describe the problem :
I'm trying to accomplish the recovery of my ultrabook (s400u) from the three disks provided by Lenovo and am having trouble finding it in the process does not create the boot image in HD SSD. Recovery only creates the boot image on SATA HD.
How to perform the Recovery HD correct (in case the SSD - 32 GB).
OS: Windows 8
Ultrabook: IdeaPad S400u
I have windows 8 in my T430....I just wanted to know the detailed procedure for creating the recovery for it..
View 1 Replies View RelatedWhere Can I download or order a Boot Disc for my Z580? It came with Windows 7, and PC World were offering a free upgrade to Windows 8.
I am currently unable to create a Factory Default Recovery Disc. There is an error with the Onekey Recovery software in burning onto the DVD / Disc. I have tried two different DVDs (4.7GB), and have tried a CD (740MB). And I receive the same error about one fifth of the way through.
The reason I am having to do a factory reset, is because my Wirless Network driver is not working, and the laptop no longer accepts external wireless USB dongles. I can't get internet even with a wired connection. It isn't to do with whether the wireless is switched on or not. I've tried this.
What is Lenovos policy about providing customers with the means to restore their Laptops? In the past computer manufacturers / suppliers provided all the software and bootdiscs.
Just upgraded from Windows 8.1 preview to Windows 8.1... since then my display doesn't look right at all. Resolution seems to be set to 1920x1080... which I belive is correct.
But text, icons and windows seem bigger than they were before.
Also the display is lacking sharpness around text. Do I need to upgrade some drivers or something?
I just upgraded my x120e to windows 8. i can't open my bluetooth, i have already tried FN+ F5. Nothing happend. bluetooth is important for me.
View 6 Replies View RelatedI made the mistake of upgrading my X240 to Windows 8.1, and now the sleep function won't work properly. I've updated all of the drivers and I've been on the phone with Lenovo support to no avail. Everything worked perfectly before the 8.1 upgrade.
When I close the lid now, the screen goes off, but the computer doesn't go to sleep; if you open the lid, the screen comes back on immediately. If the lid is closed for a while, and is then reopened, the login screen comes up. But in the Windows 8.1 settings, it is set to NOT show the login screen. If the lid is closed for a long time, the computer will shut down completely.
If you go to the Windows menu and click on "Sleep," the screen will go dark although it's clear the computer is still running. Pressing the on/off button does nothing. The only way to get the screen to come back on is to shut the computer down completely and restart it.
I tried uninstalling the Lenovo Instant On Beta program, but without that, closing the lid shuts off the screen with no way to wake it up, the same thing that happens by clicking Sleep on the Windows menu. So it appears that the Instant On Program partially overrides whatever bad behavior is being caused by Windows.
What driver, software, or settings could be causing this? I've looked at various threads about sleep issues, but none of them seem to apply to my situation, or the solutions they recommended (like unchecking the power management features on some of the drivers) didn't solve the problem.
I recently got this laptop and wanted to upgrade to Windows 8.1 immediatly since it came with Windows 7. This was of course and option with the disc set that came with the laptop. Unfortunately i have encountered problems in the installation/recovery of Windows 8.1.
When the laptop is finished using the actual disc's (i say finished because it spits out disc 4 which is the last one) and is booting into the OS to do the last installing it "freezes" in the middle of "dowork.cmd". In the cmd window it tries to access a destination directory which it can't. Instead of writing it here, i'm just gonna link a picture of it:
I just don't understand why simple recovery discs would cause a failure... Googling the problem has only lead to this: URL....
I recently got an E135 that came with Windows 8 preloaded. I really didnt like the new interface so I installed Windows 7 on it. Unfortunatly I forgot to create a recovery stick using this method. Now I'd like to reset it back to Windows 8 but I have no means of forcing the computer to acces the recovery partition.
Method's I've tried: F11 during startup gives me the option to recover Windows 7 from a USB stick. Which is weird because the original OS was Windows 8Rescue and Recovery and OneKey both give me the option to back-up but not to restore from the hidden partition.
Info: Lenovo ThinkPad Edge E135 335972G..Disk Managment shows one HDD divided into: 2x recovery partition, 1x EFI system partition and normal parition.