Lenovo M30-70 C/E/K/M/N/V Series :: Windows 8.1 Upgrade Recovery Disc Set - Stuck On Installation
Jan 8, 2015
I recently got this laptop and wanted to upgrade to Windows 8.1 immediatly since it came with Windows 7. This was of course and option with the disc set that came with the laptop. Unfortunately i have encountered problems in the installation/recovery of Windows 8.1.
When the laptop is finished using the actual disc's (i say finished because it spits out disc 4 which is the last one) and is booting into the OS to do the last installing it "freezes" in the middle of "dowork.cmd". In the cmd window it tries to access a destination directory which it can't. Instead of writing it here, i'm just gonna link a picture of it:
I just don't understand why simple recovery discs would cause a failure... Googling the problem has only lead to this: URL....
View 2 Replies
ADVERTISEMENT
Jul 31, 2014
I have hp pavilion dv6 laptop.I am trying to recover my whole system with the recovery discs i have created . But it stuck afetr windows logo on a blue screen with mouse pointer.
And whenever i tried to install from other media then its shows error 0Xc00000f.
View 1 Replies
View Related
Nov 6, 2014
I have a Lenovo Y410P that will not boot. The BIOS only sees to PXE boot. It does not attempt to boot from the Windows 8 installation disc, or from the hard drive that I reinstalled Windows on myself. I can boot to both of these on other computers, so I know they are not the problem. I'm thinking it's BIOS or motherboard related, but I'm not sure where to go from here.
View 2 Replies
View Related
May 13, 2014
when I try to install the Windows 8 copy I got with my Lenovo S440 in a virtual box environment
the installation procedure hangs on the windows splash screen. I never saw a Windows 8 installation
procedure before, so I booted my laptop from the installation media to check if it is corrupted.
This works fine. A loading dot circle is displayed under the logo after a few seconds and than after quiet
a while the lenovo wizard is shown... so it has to be an issue with the virtual box.
I attached a screenshot to show you where it hangs.
View 2 Replies
View Related
Dec 24, 2012
I`ve just received my new notebook and I had already bought the SSD drive I would like to use with it.In the first moment I thought it would as easy as described hereURL.... but my notebook has the windows 8 and the OKR 8.0 and I can't find the option to create recovery discs.
I found out that I can make a recovery media, a pen drive with at least 16Gb, to recovery the system. I would like to make the same with DVDs. create the recovery discs or to reinstall the windows 8 from scratch with the same license key (not even sure if I have one) the one preinstalled in my notebook?
View 5 Replies
View Related
Jan 6, 2013
After upgrading to Win 8.1 and trying to create the usb recovery drive, I get this error:"We can't create a reccovery drive on this PC. Some required files are missing.To trouble shoot problems when your PC starts,use your window installation disk or media".
View 2 Replies
View Related
May 2, 2013
I recently ordered a new Carbon X1 20A7 for a VP here and noticed that it, as well as all the other sets we receive for the T430's, W530, etc all contain 4 things - 3 discs and a small pamphlet. The Pamphlet explains that the discs should be labeled 1 2 3 and all (Ive checked an order of 100 T430s and the first 17 boxes are all wrong) contain 2 x #1 and a #2 - I have looked in the old lab and found older shipments that all contain similar 1 1 2 instead of 1 2 3 .
View 2 Replies
View Related
Feb 16, 2014
Where Can I download or order a Boot Disc for my Z580? It came with Windows 7, and PC World were offering a free upgrade to Windows 8.
I am currently unable to create a Factory Default Recovery Disc. There is an error with the Onekey Recovery software in burning onto the DVD / Disc. I have tried two different DVDs (4.7GB), and have tried a CD (740MB). And I receive the same error about one fifth of the way through.
The reason I am having to do a factory reset, is because my Wirless Network driver is not working, and the laptop no longer accepts external wireless USB dongles. I can't get internet even with a wired connection. It isn't to do with whether the wireless is switched on or not. I've tried this.
What is Lenovos policy about providing customers with the means to restore their Laptops? In the past computer manufacturers / suppliers provided all the software and bootdiscs.
View 3 Replies
View Related
May 9, 2014
I was making a Windows 7 recovery disc set, usning the Lenovo Thinkvantage tools, and one of the first pop up windows that came up said "Note: DVD RAM is not supported for Disc 1 of the Product Recovery disc set". Does this meen that I cannot use a DVDs for a Recovery discs? That is all I have.
View 1 Replies
View Related
Sep 28, 2013
I have purchased a Lenovo Thinkpad T430. This laptop came with pre-installed Windows 7 Pro. However I want to use Windows 8 which I have a recovery disc for.
I built in a SSD instead of the optical drive. So I don´t have a optical drive. On this SSD I want to run my OS.
With a software from Samsung (manufacturer of my SSD) I was able to copy the Windows7 OS on my SSD.
As I mentioned above I bought a laptop with installed windows 7 pro and a Windows 8 upgrade disc. Therefore I got the "Operating System Recovery Dis Windows 8 Pro. (OEM Activation 3.0 Required)".
The problem now is that I have an upgrade disc but no optical drive. So I created an image of the upgrade disc and with this image I have created a bootable USB stick with the following program:
[URL] ....
When I boot my laptop using the bootable USB stick everything seems to be working until to the point where I have to accept the EULA.
So I chose a language, and clicked on "I accept the agreements".
When I want to click on "next" I got a error message "recovery failed".
Please have a look on the following picture taken with my smartphone. The language used in this picture is german as i live in Austria.
Link to image
How I can upgrade to Windows 8? Why the upgrade disc is not working?
View 8 Replies
View Related
Dec 28, 2014
I was installing Linux and by mistake I wiped out the entire disk inclusing the recovery partition with windows 8 installation stuff !! Do you know if it there is any way to get it back, downlading it from somewhere and installing ? I searched on the Lenovo website but didn't find any clue....
View 9 Replies
View Related
Mar 15, 2009
Is there a way to create a Windows Vista Installation disc from either the Hidden Partition or Recovery discs? I am not talking about a "Factory Restore"... I am talking about installing a clean version of Windows using the product key on the bottom of the laptop and then using the sony website or Recovery discs to install the drivers.
View 4 Replies
View Related
Oct 14, 2008
I've got a problem with the laptop Lenovo T410s. I've put the new HDD on it (tried even the same with a different HDD too), and started to instal WIN 7 64-bit from the recovery disks. I used to do it many times so far with different Lenovo laptops without any problems. But this time, a while before the end of the instalation (when processing the sdrivebackup.wim) it stops and comes with a statement: " the recovery process has been finished, please ...." (but I see that the progres bar is far awayfrom 100%) , and finishes the instalation, reboot the computer and it comes the screen with the statement from the Windows Boot Manager:
"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem (...)
File: Windowssystem32winload.exe
Status: 0xc000000f
Info: The selected entrycould not be loaded because the application is missing or corrupt"
I read a lot about the ways to solve similar problems, but they don't work on my case. The strange thing is, that I can instal WIN 8 or WIN7 from regular Windows instalation disks (not from Lenovo recovery, but from normal universal Windows instalation disks).
As I told before, I tried it in 2 different HDD disks with the same effect. It looks that the recovery instalation stops before the end without instaling some files which are missing later during starting the system.
View 9 Replies
View Related
Oct 9, 2014
I bought a new Lenovo G510 laptop. I downloaded Windows 8.1 from Microsoft DreamSpark, and burned ISO image on a DVD disc. When I try to install it on my laptop, I receive an error (it might be wrong translated):
Load Driver
A media driver your computer needs is missing. This could be a DVD, USB, or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now.
Note: If the installation media for Windows in the DVD drive or on a USB drive, you can safely remove it for this step.
I already tried changing the following options in BIOS but no effect:
Configuration tab -> SATA Controller Mode from AHCI to Compatible
Boot tab -> Boot Mode from UEFI to Legacy Support
Boot tab -> Boot Priority from UEFI First to Legacy First
Also, I tried to insert CD with drivers which was in the box, but - of course - no appropiate drivers were found.
What happened? How am I supposed to install a Windows 8.1? What should I try?
View 2 Replies
View Related
Jul 18, 2014
I just got my brand new Y510P and realized that is unable to start Windows. Initially it displayed error "Windows could not parse or process unattend... [...unattend.xml] for pass [oobeSystem]..."
After reboot it start displaying another message - "Windows could not complete the installation... restart the installation".
The operation system is Windows 8.1.
Looks like I'm not the only person with this problem. System recovery doesn't work, obviously (as well as graceful Lenovo tech support).
I think that the problem caused by incorrect unattend.xml file which fails to install some unnesessary software and because of this error blocks Windows from finishing the installation.
I see no other way rather than install Windows from another source. I don't want to pay for another Windows license and rather send the laptop back to Lenovo, but maybe there is another way?
View 4 Replies
View Related
Dec 20, 2013
Basically I am trying to install a new Samsung SSD into a W530, however, I can not get the Bios or Windows instalation to see it (when you select what drive you want to install windows on).
I can externally attach the SSD to my other laptop and see the drive. I can create partitions, format them, etc. But none of that worked my original issue.
I have also updated to the latest BIOS version, tried turning off UEFI, no luck.
What I am missing here to get this SSD to show up?
View 2 Replies
View Related
Aug 2, 2014
I've just received my brand new Lenovo G510 and installed Windows 8.1 Pro 64-bit onto it.Most of the drivers from the attached CD installed without any problems (though I was quite surprised that no newer versions were available on the Support wrbpage) but I can't install audio driver.Apparently this series is equipped in either Conexant or Realtek audio chips and the provided setup application is desigend to detect the correct chip and run the appropriate driver installation program.
The problem is that setup is not working for me. All I receive is the notification "This utility can not be used on this machine". Since there are no "orphan" audio devices in the Device Manager, I can't really tell which audio chipset is installed in my machine. I don't want to install both dirvers as it may just cause confilcts.How can I say which audio chipset is installed and install the correct driver?
View 1 Replies
View Related
Mar 31, 2013
My Dell Inspiron 1764 laptop will not boot up after using windows 7 installation disc in repair mode, as it has to restart several times during set up, it would not restart after first phase of operation. It never got to finish operation. Now it is just coming up with a black screen saying, Windows boot manager
Windows failed to start. A recent hardware or software change it might be the cause. To fix the problem:
1. insert windows installation disc and restart computer (which it will not let me do)2. choose your language settings and then click next 3. click repair your computer
if you do not have this disc, contact your system administrator or computer manufacturer for assistance
file: BootBcd
status: 0x000000f
info: an error occurred while attempting to read the boot configuration data
After start up even pressing F8 before logo disappears numerous times it will not let me into that menu, so I cant access start up in safe mode or last known good configuration. No matter what I do it will not go past the above message on screen.
View 3 Replies
View Related
Mar 31, 2013
My Dell Inspiron 1764 laptop will not boot up after using windows 7 installation disc in repair mode, as it has to restart several times during set up, it would not restart after first phase of operation. It never got to finish operation. Now it is just coming up with a black screen saying, Windows boot manager
Windows failed to start. A recent hardware or software change it might be the cause. To fix the problem:
1. insert windows installation disc and restart computer (which it will not let me do)2. choose your language settings and then click next 3. click repair your computer
if you do not have this disc, contact your system administrator or computer manufacturer for assistance
file: BootBcd
status: 0x000000f
Info: an error occurred while attempting to read the boot configuration data
After start up even pressing F8 before logo disappears numerous times it will not let me into that menu, so I cant access start up in safe mode or last known good configuration. No matter what I do it will not go past the above message on screen. I do have 1 year left on my warranty
View 1 Replies
View Related
Feb 25, 2014
I tried to install Windows 7 on my computer and it was stuck at "Starting Windows." I turned off the computer (held power button) and when I boot it up it said "Resuming Winfows." Then it went to a black screen. So I turned it off again and it went back to "Resuming Windows." I pressed CTRL + ALT + DELETE and it said resume windows or start windows again. I said start windows again and it went to frozen at "Starting Windows" and I can't boot it up or factory reset.
View 5 Replies
View Related
Feb 5, 2015
My laptop hp mini 110-3605tu model number is facing stuck after windows 7 installation load. It has no recovery hard drive as hard drive is fully formatted. i want to flash my bios because i know bios is corrupted. How can i flash my bios using usb drive. What is the bios manufacturer company so that i can flash my bios using non windows application ....
View 8 Replies
View Related
Dec 2, 2014
I'm very stuck with my Y580, and I'll start by saying that I purchased the laptop about 1.5 years ago, and it came with Windows 8 installed. I didn't like Windows 8 so much, so I decided that I would get Win7. I also decided that I'd put it on an mSATA to speed things up. After doing so, I just formatted the boot partition on the older drive to use for storage. But I kept the recovery partition on there. Everything seemed to work fine until I was recently informed that I should update the BIOS. I followed all of the instructions from Lenovo in updating to the version 8.00, something like 89WW in the file name. Then recently I noticed my temps were realllly hot when gaming... and I don't play graphically demanding games. I monitored my temps and found out that my CPU (i73630QM) was running over 90°c when playing games like LoL, Dishonored, RIFT, Darksiders, and a few others, all on lower settings.
I did some googling about temps and a lot of people were saying that BIOS is often a culprit for high temps. Maybe you've already put two and two together, but it took me until this point to discover that the BIOS I had updated to is a Win8 BIOS, and I'm using Win7. I figured, this is probably a big part of my issue (and even if it's not going to solve the heat issue, I'd still like to have all my ducks in a row and have all my hardware/software/firmware compatible.
As we all very well know from the few years of tampering with these Y580s, the BIOS can't simply just be rolled back. But I figured there had to be a way. After googling around for some time, I ended up trying a few different things; editing the Config file for the earlier version of the Bios (which just resulted in another error and locked up the keyboard and mouse), I tried booting the BIOS image from a USB, but to no avail (I tried both booting from USB and also a force BIOS update, using the fn+B method, which I realize I may be doing incorrectly, as I am not entirely sure what I should name the ROM file... I can't boot windows to use ANDYSTOOL, so I named a bunch of different ROM files with different names that have worked for other people) ... so on and so forth...
The last thing I've tried was Restoring the BIOS to factory settings (within the BIOS) and now the computer will not boot windows. The Lenovo screen Posts, and Windows starts to load, freezes a moment, Blue Screens for a second, then reboots, saying that there is an issue with either Hardware or software, and gives me he option to either boot windows normally (which just results in the same thing again) or to run an automatic repair. I tried the automatic repair and it just sits on the "Preparing Automatic Repair" screen, and will do so for hours with no progress.
View 3 Replies
View Related
Jul 23, 2014
For the past couple of weeks I haven't been able to use my lenovo s230u twist. I can turn it on, I can get to the "lenovo, to interrupt norml startup press enter." But then the screen goes black. Then I get to the windows boot manager, where i get some options. [URL] ....
View 2 Replies
View Related
Feb 10, 2009
I just ordered the Sony Vaio FW series. The agent said the notebook don't come with any Windows Vista Home Premium x64 DVD's as back up and i need to burn the recovery disc from the OS once i receive the laptop.
1. Is this the standard practice of shipment.
2. If i am to create recovery disc from the laptop, and then at a later time format and do an install from the recovery back up disk's, does the recovery install the old factory shipped drivers & software by default. If so is there a way to get rid of this.
3. What do i do if i want to do a clean install of the OS with the new drivers from net.
View 3 Replies
View Related
Nov 20, 2009
I have just received my upgrade discs for both my new Z620D laptops, followed the rather vague instuctions to the letter, clicked Upgrade. All went well until it asked for the licence key. Does the W7 upgrade licence key come with the discs or in an email? The original vista key does not work.
View 4 Replies
View Related
Dec 21, 2009
I would like to restore my laptop to factory settings after butchering the factory install. I see the "LENOVO" volume as Drive D, and it appears to have the restore tools, but I cannot figure out how to get to One Key Recovery. I've tried rebooting while pressing F2 or F11 repeatedly; F2 gets me to BIOS, F11 doesn't seem to do anything.
View 2 Replies
View Related
Aug 22, 2014
I was trying to reset my computer and taught disc sanitizer would do the trick. obviously it didn't .
Now it just says "non system disk or disk error " and it seems like I lost my OS. I'd like to run windows vista on my computer but I don't have an installation disc.
The computer, in question, is a Compaq 8510. I downloaded windows vista off the internet but how to install it on my laptop.
View 1 Replies
View Related
Apr 15, 2009
Apple care hk is very good.i just lost my whole recovery disc and i life 09 disc and also the receipt.i just call apple care.they said they will send me the whole disc free of charge.
View 5 Replies
View Related
Nov 17, 2009
I just received Windows 7 Upgrade Disc from Dell, and it says "Windows Vista Business to Windows 7 Professional Upgrade" on the disc and COA also says "Win Vista Bus to Win 7 Pro UPG Fullfill."
I was curious if it is really impossible to do a clean install with upgrade disc as regular upgrade disc is. (At least I was told that it is impossible), but I did not want to upgrade my notebook to Windows 7 yet.
So, I gave it a try on VMWare. It installed just like regular Windows 7 disc in a empty HDD. It even took COA that came with the upgrade disc.
I did not try activating because it probably will fail if it uses SLIC to activate, or in worst case, it will get activated on my VM, and I will be unable to active it when I actually want to upgrade my notebook's OS
View 10 Replies
View Related
Sep 10, 2014
I just bought a G505. The Control Panel option for creating a recovery drive ony seems to offer USB flash drive as an option.
Is there a way I can create a recovery CD-ROM?
View 9 Replies
View Related
