Lenovo P/Y/Z Series :: Windows Could Not Complete Installation - Y510P
Jul 18, 2014
I just got my brand new Y510P and realized that is unable to start Windows. Initially it displayed error "Windows could not parse or process unattend... [...unattend.xml] for pass [oobeSystem]..."
After reboot it start displaying another message - "Windows could not complete the installation... restart the installation".
The operation system is Windows 8.1.
Looks like I'm not the only person with this problem. System recovery doesn't work, obviously (as well as graceful Lenovo tech support).
I think that the problem caused by incorrect unattend.xml file which fails to install some unnesessary software and because of this error blocks Windows from finishing the installation.
I see no other way rather than install Windows from another source. I don't want to pay for another Windows license and rather send the laptop back to Lenovo, but maybe there is another way?
View 4 Replies
ADVERTISEMENT
Oct 3, 2014
I ran the eRecovery tool with the Backup data option. The laptop restarted but stalled on the 'Setup is starting services' screen. The following error appears: "Windows can not complete the installation. Setup will continue after restarting Windows". The restart process begins but it stalls again at the same spot.
View 8 Replies
View Related
Oct 9, 2014
I bought a new Lenovo G510 laptop. I downloaded Windows 8.1 from Microsoft DreamSpark, and burned ISO image on a DVD disc. When I try to install it on my laptop, I receive an error (it might be wrong translated):
Load Driver
A media driver your computer needs is missing. This could be a DVD, USB, or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now.
Note: If the installation media for Windows in the DVD drive or on a USB drive, you can safely remove it for this step.
I already tried changing the following options in BIOS but no effect:
Configuration tab -> SATA Controller Mode from AHCI to Compatible
Boot tab -> Boot Mode from UEFI to Legacy Support
Boot tab -> Boot Priority from UEFI First to Legacy First
Also, I tried to insert CD with drivers which was in the box, but - of course - no appropiate drivers were found.
What happened? How am I supposed to install a Windows 8.1? What should I try?
View 2 Replies
View Related
Feb 11, 2014
I tried to update my y510p to windows 8.1 twice now. But when the installation finishes i get a black screen with a cursor. I tried to boot in safe mode to install the right drivers, but it wont let me. It automaticaly boots and restore the previous version of windows.
So I'm wondering if i should take some precautions before i update to win8.1 (Like instaling the win8.1 display drivers?)
Maybe a better question is if I sould at all update to windows 8.1?
View 7 Replies
View Related
Oct 17, 2013
Today I installed the windows 8.1 (realease version, from the windows store), and although my screen resolution is 1920x1080, the image sucks! It seens much pixelized and with less sharpness..
For example, look at this screenshot of my taskbar. Look at the chrome icon.
View 9 Replies
View Related
Dec 20, 2013
Basically I am trying to install a new Samsung SSD into a W530, however, I can not get the Bios or Windows instalation to see it (when you select what drive you want to install windows on).
I can externally attach the SSD to my other laptop and see the drive. I can create partitions, format them, etc. But none of that worked my original issue.
I have also updated to the latest BIOS version, tried turning off UEFI, no luck.
What I am missing here to get this SSD to show up?
View 2 Replies
View Related
Aug 2, 2014
I've just received my brand new Lenovo G510 and installed Windows 8.1 Pro 64-bit onto it.Most of the drivers from the attached CD installed without any problems (though I was quite surprised that no newer versions were available on the Support wrbpage) but I can't install audio driver.Apparently this series is equipped in either Conexant or Realtek audio chips and the provided setup application is desigend to detect the correct chip and run the appropriate driver installation program.
The problem is that setup is not working for me. All I receive is the notification "This utility can not be used on this machine". Since there are no "orphan" audio devices in the Device Manager, I can't really tell which audio chipset is installed in my machine. I don't want to install both dirvers as it may just cause confilcts.How can I say which audio chipset is installed and install the correct driver?
View 1 Replies
View Related
Mar 15, 2014
I received my Y510P monday and the performance has been as expected. But Win 8.1 would often freeze, hang, even on restart and shutdown screen where I had to manually shut it down. I have found that uninstalling expresscache seems to have solved the hangups/freezes... I tried uninstalling, clearing my cache drive, and re-installing with latest expresscache version but still the same problem. Had to uninstall it. Is this a compatibility thing with win 8.1 or a hardware problem? I ran Seatools, and the SSD passes all the test EXCEPT long generic. Although SSDLIFE says that it is in perfect condition and should be good until 2022.
View 9 Replies
View Related
Feb 14, 2014
I will keep this short, I have a Lenovo ideapad y510p with Windows 8.1 (I got it with 8.1, did not upgrade from 8) . I noticed a problem yesterday, where I cannot adjust the screen brightness. If I use the keyboard commands (Fn + Up and Fn + Down) The slider appears on the top left of the screen, as always, but does not “slide” It stays static.
If I move the slider on the Setting menu, I can slide the value but the brightness does not change and the value is not reflected on the slider on the top left of the screen.
I am not sure when this happened for the first time.
View 1 Replies
View Related
Jan 8, 2015
I recently got this laptop and wanted to upgrade to Windows 8.1 immediatly since it came with Windows 7. This was of course and option with the disc set that came with the laptop. Unfortunately i have encountered problems in the installation/recovery of Windows 8.1.
When the laptop is finished using the actual disc's (i say finished because it spits out disc 4 which is the last one) and is booting into the OS to do the last installing it "freezes" in the middle of "dowork.cmd". In the cmd window it tries to access a destination directory which it can't. Instead of writing it here, i'm just gonna link a picture of it:
I just don't understand why simple recovery discs would cause a failure... Googling the problem has only lead to this: URL....
View 2 Replies
View Related
Feb 20, 2014
I recently bought the Y510p laptop and upgraded windows to 8.1
Since the upgrade i'm getting contant freezing, which could last 10seconds or 10minutes.
Any time i restart the computer it will hang, and the only way to kill is it to press on Power button.
Checked the eventviewer and i found the following warning appearing every minute:
Log Name: System
Source: iaStorA
Date: 20/02/2014 17:36:40
Event ID: 129
Task Category: None
Level: Warning
[Code] ....
After long research i came to conclusion that the ExpressCache is causing this.
The moment I uninstalled it, issues disappeared. System will restart without any issues, it won't freeze either.
Checked the following article: [URL] ....
Tried to re-install ExpressCache but the issue started to presist straight away, constant freezing and the above message in event viewer.
View 9 Replies
View Related
Apr 15, 2014
Its been quite a while (3 months ) that ive upgraded my windows 8 to 8.1 . I didn't bother checking it till now that I cannot connect to any ethernet network at all. Ive tried evrything from disabling ipv6, updating network drivers and even resetting the routers like a gazillion times but i've had no such luck in any of the process ive done so far .
View 3 Replies
View Related
Nov 25, 2013
So I purchased a y510p from a retailer yesterday and was very happy with it. First thing I did was update to Windows 8.1. After updating, I get VERY unreliable, weak wi-fi signals and limited connectivity on all wi-fi connections. My wireless card is Intel Centrino Wireless N-2230.
View 2 Replies
View Related
Nov 6, 2014
I have a Lenovo Y410P that will not boot. The BIOS only sees to PXE boot. It does not attempt to boot from the Windows 8 installation disc, or from the hard drive that I reinstalled Windows on myself. I can boot to both of these on other computers, so I know they are not the problem. I'm thinking it's BIOS or motherboard related, but I'm not sure where to go from here.
View 2 Replies
View Related
Jan 26, 2013
I have a N5110, with OEM Windows 7, recently I buy Windows 8 Pro, but I cant Upgrade or Fresh install on my laptop, the installation does not complete or finish, after several restart Windows 8 bootscreen with new logo shown, but never finish, finally after 4 hours I force shutdown the system, when I restart, the system tell, installation not finished, NO ERROR message shown and automatically rollback to Windows7.
View 3 Replies
View Related
Jan 9, 2015
Trying to do a clean install of win7 on a new ssd. Seems to be going well until time for reboot. then things go downhill from there, until nothing responds. Nothing I try works. I tried from both a iso win7 disc, and from a disk I have from my desktop. Same results. Is it possible to do a recover onto a new ssd? If so, how?
View 6 Replies
View Related
Jun 21, 2009
This is a laptop without Recovery Discs, where the original drive partitions were erased and reformatted as 1 big partition. During Vista installation, it always reboots just as Vista is on the verge of "Completing Installation". So near and yet so far. The BIOS shows the hard drive as an IDE drive - even though this is clearly a SATA drive. Is this a driver problem? Do I need to load SATA drivers before having Vista go through the installation?
View 4 Replies
View Related
Oct 26, 2013
My lenovo Y510P used to always be at 100% but I have realized it has been decreasing by 1 every day. I have it on Maximum Battery Life with the Energy Management application.
It is currently at 85% and I would have posted this sooner if I had payed attention. I changed it to Optimized Battery Health and it is now dropping, currently at 75%.
I always leave the laptop plugged in because I usually play games on it such as battlefield, dayZ, counter strike, etc.
View 9 Replies
View Related
Jan 4, 2014
I've been playing Battlefield 3 for some time on Auto settings (most of them are Ultra) and my FPS were always in the range 65-85. Yesterday morning everything was fine, however at night when I opened the game again I had 10-15 FPS. I haven't changed anything in my laptop settings so I don't know why this is happening.
P.S: I only have 1 GPU (not the SLI version) so I know it's not a loss of power. But my battery settings are set to "Optimized battery health". Does it affect performance ?
View 4 Replies
View Related
Feb 10, 2015
I've got Y510p with USB 2.0 not working. By the time it malfunctioned it was under warranty and I sent it in the service center. They have claimed that it has been repaired (USB board has been changed) but it is still not working and my warranty ended like 3 days after I sent it back. Since then (1 month ago) I am returning it to the service center for 3 times (last one was today) and I feel they can't fix it. URL....
View 3 Replies
View Related
Sep 13, 2013
I have an Y510p laptop and I am not pleased with the hdd performance, so I wanted to add an SSD, but the slot is literally missing:
what am I supposed to do? I know that this laptop supports only M.2 SSD, and I am ok with that
View 9 Replies
View Related
Jun 6, 2014
I bought Lenovo Y510P . and because of just hyper-v feature on win 8.1 pro also i need to upgrade windows. I found product key with a software and after that i open the "add feature to windows 8.1" . And when I choose "i already have product key" and put the product key , it does not accept . and says "this key won't work" .
So what i should do for getting windows 8.1 pro pack ? and why product key does not work ?
View 7 Replies
View Related
May 6, 2014
Is it possible to overclock the GPU and CPU a lil' bit in my y510p ?? If yes, how much can i boost it up and if it's worth it though...?
View 9 Replies
View Related
Jan 3, 2015
When I recieved my Y510p about 8 months ago, the usb ports worked perfectly fine. Around October they stopped working properly. The only solution which I found to work was doing a system restore. When I did this, an Unrecognized Device in the Device Manager was no longer unrecognized, and was instead replaced by USB xHCL (or something along those lines). However, as soon as i restared my computer again, the ports broke, and the unrecognized device reappeared. Repeating the restore followed by a restart breaks the ports every time.
View 7 Replies
View Related
Apr 9, 2014
My Y510p has been freezing on startup, every startup. It can be completely inoperable for upwards of half an hour before unfreezing. It unfortunately has been occuring since the computer arrived (21 March, this year), so I doubt it has been caused by any software I've added. Given my limited knowledge of computers.
Lenovo Y510p Model 20217
Windows 8(64 bit), Intel Core i7-4700MQ CPU (2.40 GHz), NVIDIA GeForce GT750M, 8GB RAM
View 5 Replies
View Related
Jan 10, 2014
I have a new y510p I just received this week. First thing I did was replace the 1TB HD with my own OCZ Vertex 4 256GB SSD Drive.When I power on the laptop for the first time, it does not find a bootable device (goes through network devices, then says no bootable devices). If I use ctrl-alt-delete to reboot the laptop, it then finds the drive on its own and starts booting into Windows.
I'd like to understand why this does not work on the first boot? I went into the BIOS and saw it says there that no drives are detected.This worries me slightly, as perhaps one day it will decide to no longer recognize the drive after the ctrl-alt-delete?
View 4 Replies
View Related
Jun 9, 2013
Is there any way i can clone the stock hdd on my y510p to an ssd without losing one key recovery?
View 9 Replies
View Related
Jul 25, 2014
On my Y510p I am getting low memory warnings wether im playing a game or just idling or on youtbe. When I open up the task manager its says my memory is at 70%-100% WHILE IDLE but the programs are only using like 25%-40% memory so something is hidden. Just looking for a fix or allocating more memory to Windows. I have an 8Gb system.
Here is a screenshot of the task manager while I right this [URL] ....
View 9 Replies
View Related
Mar 29, 2014
Why this is happening I just got the computer yesterday. I've checked all the plugs everything is in fine.
View 4 Replies
View Related
Aug 6, 2013
How do i turn SLI mode on my dual graphics GT750M on the Y510p laptop. GPU-Z says SLI is disabled. Can't seem to find a place to turn it on Nvidia control panel either. Device Manager does show 2 GT750m working right.
View 9 Replies
View Related
