Sony :: FW Series Windows 7 Clean Install Drivers
Dec 5, 2009
I have a Sony vaio FW21M
it has the mata bd-mlt uj230as basically the blu-ray drive......
I was wondering if anyone has the correct driver for this because I can't seem to play any blurays and can't burn anything with it, it just works like a normal dvd drive, does nothing else
I did a clean install so i need the firmware, I tried all the links on this forum and can only find the UPDATE for the driver not the original install..........
View 10 Replies
ADVERTISEMENT
Jan 17, 2009
THIS IS FOR WINDOWS VISTA 64-BIT ONLY
My system is VGN-AW190.
There are already a couple of "guides" floating around that describe how to install a clean copy of Windows on Sony laptops.
The process is fairly simple and involves installing certain Sony software and drivers in particular order (according to Sony).
For FW series, the guide is here: Official Vaio FW Clean Vista Install Guide
When I first installed Windows Vista Ultimate, I had no problems getting everything to work EXCEPT for the following:
1) CompactFlash (JMicron JMB368 ExpressCard CF) driver is not available on Sony's web site. When inserting the card, it does not show up as a drive in Windows Explorer. After some time playing around, I figured the following 2 ways to make it work:
a. Insert your card, go to device manager and click on "scan for hardware changes"
b. Boot Windows while the card is inserted
2) SD card slot works but is not mapped to any drive. While Ricoh MS driver automatically creates a drive, there is no driver on Sony's web site that would do the same for SD slot.
Sony's support is useless to a point where they told me that the reason why my CF cards do not show up and there is no drive mapped to the slot is because the laptop does not support cards larger than 4GB (and I have only 8GB Sandisk cards) What a joke. I finally managed to get a 2nd tier technical guy on the phone who said that Sony does not provide CF drivers and that there is nothing they can do about it..........
View 10 Replies
View Related
Feb 2, 2010
I'm wondering what order do the drivers and applications have to be in to do a Windows 7 clean install for the i7 F series?
View 10 Replies
View Related
Apr 21, 2010
I was searching for a Thread that has some data about clean instructions and restoring all functions for the VAIO E-Series, but I didn't find one.
And since there is a lot of users here who own the VAIO E-Series, I think it might be useful.
So, can anyone share his experience with a clean install on the VAIO E-Series and how did you do that?
Some special order in installing drivers? What's about the FN-Buttons? Whats about the Assist and WEB Buttons? Are they all working?
View 4 Replies
View Related
Feb 14, 2010
i just reinstalled winxp sp3 on a sony s3xp, i don't have the vaio installation cd but i did a clean reinstall of windows xp and installed essential drivers but it was quite slow, eg seconds to load a directory, or long pauses during web browsing
now i've installed all the original drivers and utilities and am running without power saving but it's still sluggish, eg the mouse pointer jumps about the screen rather than moves continuously when the cpu is under any load at all
View 7 Replies
View Related
Nov 1, 2009
I am getting my win7 upgrade disc tomorrow for my studio 1555, and I was wondering a few things before I carry out my clean install.
First, with regards to drivers, there do not seem to be drivers for everything on the dell win7 driver page (nothing for bluetooth, system utilities, etc.). I have downloaded everything relevant to my computer, but where can I find the rest of the drivers I need? Also, what order should I be installing them?
Second question is in regards to the recovery partition. Is there any point keeping it? I have heard various things about whether it will or won't work after installing windows 7
View 3 Replies
View Related
Jul 17, 2009
if there was a way to do a clean install of Vista (preferably Ultimate 64-bit) on the Vaio Z and have functioning s1/s2 and speed/stamina and Wlan controls. I found the guide for 7, I was wondering if there was something like it for vista, or at least a place where i can get the drivers. My viao Z came with alot of "bloatware", and i'd like to have it snappy.
View 10 Replies
View Related
Feb 13, 2014
I just bought and received a y410p with the hybrid drive. I have a 120gb ssd that I would like to make a fresh install on. Where do I get both the iso and the window's key? My box didn't come with any disks or windows key. I don't really wish to just clone the hdd since there is so much lenovo branded junk included. What are my options?
Edit: Would I also have to install all of the drivers separately? I've not used windows in some time now. I've been running linux for quite awhile and it picks up most hardware without dealing with drivers.
View 5 Replies
View Related
Sep 26, 2009
So I guess two questions wrapped into 1:
1. If I clean install Win7 on this Z, what isn't going to work right off the bat and what steps can I take to get it fully functional? I saw a nice guide for the TZ, but not for the Z.
2. Has anyone attempted a straight upgrade to Win7?
View 9 Replies
View Related
Feb 20, 2010
installing Windows 7 on CR series that I may have missed?
I'm basically trying to get the AV buttons and FN keys to work, everything else seems to be detected by Win7.
View 5 Replies
View Related
Apr 24, 2014
X140E model 20Bl.Attempting to do a clean install of Windows 7 Pro 64 bit. In BIOS set UEFI/Legacy Boot to "Legacy Only". Secure Boot is set to "Disabled". SATA Controller Mode Option is set to "AHCI". I boot from an external DVD drive. Windows Setup loads. Select "Install Now". Pick "Custom". Select "Drive Options". Delete existing drives. Select "Load Driver" and browse CD where I downloaded and unpacked the AMD AHCI W764A driver.After driver is installed, go back to Win 7 Pro DVD, click "Refresh" and "Next". Windows Copies Files and goes to "Expanding WIndows Files". and at 4% freezes. Mouse does not move and system is locked.
View 2 Replies
View Related
Dec 4, 2009
I purchased a Sony VAIO VGN-Z46GD and was eligible for the Windows 7 Upgrade program. So my Windows 7 Disc & Supplement Disc arrived in no time. I did a CLEAN install with the Windows 7 Disc wiping everything (this was intentional).
The problem is the Supplement Disc will not run at all, gives me an error (is there a way to force it?). I used the mod2wim tool to extract all WIM's from it however I have had no success in getting my VAIO special buttons working, power management or my function keys operational. The extracted WIM's are also a bit odd, includes ATi drivers when clearly my machine is hybrid intel/nvidia.
From what I have read on the Forums I need to install things in a specific order. Also if I can't find my drivers where can I look to re-download them?
View 4 Replies
View Related
Oct 26, 2009
I have a VGN-790P notebook, currently with Windows Vista Business installed; 2GB RAM; 2.16 GHz centrino duo. However, through my school I can download Windows 7 for free!
I really want to upgrade my OS to Windows 7, but Sony is not providing drivers for my model. Is there any way that I can still install it and get the drivers from somewhere? I really dont want to do it if it's going to cause a bunch of functionality issues.
Also, I think that a clean install would be best, just to clear out my computer and possibly make it a bit more responsive. Is it possible to do this if I will be downloading Windows 7 and not have a physical disk for the install?
View 6 Replies
View Related
Nov 1, 2009
I am reading the various threads about how to go about performing a Windows 7 clean install.
I see and understand the requirements to load the Sony 'platform' drivers to get the various custom hardware working.
but what about reinstalling the original applications? Particularly some of the custom VAIO apps .....
View 3 Replies
View Related
Feb 21, 2009
DISCLAMER:The Windows 7 Beta is a pre-release version of Windows. While this a stable and high-quality beta,
it's not the finished product. It could crash your computer or cause you to lose important files or information.
BEFORE doing this procedure, backup all your data...
View 10 Replies
View Related
Oct 28, 2009
(Last update: May 27 2010)
Change log:
Mar 06 2010 - Changed SUS, VES, and VCC versions. Updated Intel 4965 adapter driver. Added Web-cam software. Added instruction for wireless band switching and disabling Bluetooth from device manager.
Mar 26 2010 - Updated Intel SATA/AHCI driver from 8.​9.​0.​1023 --> 9.6.0.1014
Mar 30 2010 - Updated Nvidia driver (laptopvideo2go) from 195.62 --> 197.16
Apr 03 2010 - Updated Nvidia driver (self modded inf) from 195.62 --> 197.16
Apr 22 2010 - Added Nvidia driver 197.45 through Windows Update
May 09 2010 - Update to SUS, S-button and additional settings in VCC.
May 27 2010 - Added Nvidia 257.15 driver, modded inf, and instructions.
The following steps below include various driver sources and install instructions.
1. Install your edition of Windows 7. I chose to change the UAC setting to never notify. If you leave it in the default setting, various prompts may open when installing the drivers and utilities. Open "Computer", click the "Organize" tab, navigate to "folder and search options", click "View" tab, and uncheck "Hide empty drives in the computer folder".
There will be two exclamation marks for the "Mass storage controller" and "Unknown device" in the device manager. Intel 4965 Wifi, Marvell network controller, and Conexant modem drivers are included in Windows 7. You can update them if necessary
View 10 Replies
View Related
Dec 11, 2009
I have been trying to make a clean install of Windows 7 but when I get to the install screen,
it says that "it does not recognize my drive." This happened too when I tried to install windows XP,
and I solved it by slipstreaming the SATA controller drivers but, I don't know where to find those for windows 7, or if that even will solve the same problem
View 5 Replies
View Related
Oct 24, 2009
I'm thinking about purchasing windows 7, do i need a clean install of windows vista to upgrade? and also do i need to get all the drivers ect like in the clean install of vista if i wish to upgrade? i have a vaio vgn-fw21L
View 3 Replies
View Related
Apr 9, 2010
I just received my sony Z1190X(CTO) and plan to do clean install on it. I just finished making the recovery&restore DVD and have Windows 7 Ultimate ready.
However, when I go on the US Sony website, they say some drivers are not compatible with Ultimate version. I downloaded every drive with Win Professional setting. Will it not work with Windows 7 Ultimate
View 6 Replies
View Related
Dec 11, 2009
Is there a way to do a fresh install from a restore disk with none of the bloatware? And then just install all the drivers?
View 3 Replies
View Related
Jan 25, 2010
performing a clean install of Windows 7 32bit on a Sony Vaio FZ from Windows Vista.
I have searched the forums and have only found guides for performing an upgrade install to 32bit and a clean install to 64bit.
View 10 Replies
View Related
Aug 19, 2009
Quote:
UPDATED OCTOBER 27 2009 FOR OFFICIAL WINDOWS 7 RELEASE
will benefit many of you upgrading to Microsoft Windows 7 64-bit RTM. This install was done and tested on a Vaio VGN-FW139E/H.
Hardware
While the VGN-FW line shares many components, many models also differ. So, I will first list the hardware that is on the VGN-FW139E and the install was done on.
Audio: Realtek High Definition
Audio (HDMI): Realtek ATI HDMI Audio
Network: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
Wireless: Atheros AR928X
Touchpad: ALPS Pointing Device
SD Memory Card Reader: Ricoh
MS Memory Card Reader: Ricoh
Modem: Conexant CX11270
Video: ATI Mobility Radeon 3400 Series..................
View 10 Replies
View Related
Mar 13, 2009
Let me first start by asking your forgiveness if I have stuffed this quick little guide in the wrong spot. I spent a rather brief 10 minutes searching this forum, and I don't believe I am repeating a write-up someone has already done that follows this simple method. If I am incorrect, I ask a moderator to please place this post in its proper home. As you can see, I am not an avid poster here, and I really don't want to be slammed for not searching with enough gusto, etc.
Alright, on to the quick 'n easy...
I have a new VGN-AW235J, so proceed with courage and fortitude if our letters don't match. I found this as I was trying various ways to cleanse this beautiful machine of it's bloatware. It worked for me, and that is all I will claim.
This method requires that you create the restore DVDs.
If you don't have a handful of restore DVDs, go do that now and come back...and while you're up, bring a snack.
One more disclaimer: I didn't take the greatest notes while doing this, so my instructions may be sufficiently vague to cause minor trepidation on the part of the reader. With that being said, each step should be fairly obvious while in front of your machine...DVDs in hand..........................
View 4 Replies
View Related
Nov 4, 2009
I did a clean install of Windows 7 and I was surprised that almost everything is working out of the gate. There are only a few bugs that I've noticed.
1.) The Fn functions in the F-keys don't work. Which driver do I need for that?
2.) Same thing goes for the Mode - - - - - Settings keys above that. Which driver fixes that?
3.) In the device manager I have and unknown "Base System Device" with the Location of "PCI bus 7, device 3, function 2". What is this/How do I fix it?
4.) The touchpad doesn't scroll. I tried installing the driver from the Sony eSupport page, but it failed. (I reinstalled and rebooted and it's working)
And not a bug, but just a straight up question...
5.) Should I install Sony Shared Library? Do I need it for anything? I really don't plan on installing any of the programs that came pre-installed with Vista, unless it's necessary.
View 5 Replies
View Related
Apr 2, 2009
I just got a studio 1737 and want to do a clean Vista 64 Home premium install.
I was going to follow Les's guide in the main dell forum but it seems media direct 4.0 will not allow me to boot from the cd.
So I want to boot from Vista and reformat and install the OS.
View 10 Replies
View Related
Jan 20, 2009
I just got my Seagate Momentus 7200.3 320GB hard drive today. I don't have any external cases I could use to do a backup image and I wanted to do a clean install anyway since I haven't done one to this system since I bought it.
I've tried using Dell's driver disc that came with the system but it's out of date.
The Web site has been a mess as well. Selecting through the service tag Dell is offering drivers for hardware that was never part of this machine and hardware that is apart of it isn't listed unless I look at all D630 drivers.
Here's what I've downloaded:
Quickset Application
Sigmatel Audio driver
Touchpad driver
Smartcard driver
View 6 Replies
View Related
Dec 20, 2013
When i bought my laptop it have windows 8 but i disliked it and have many bugs on my games so i installed windows 7
and complete delete everything in my harddisk. I couldn't find product keys anyway packet , laptop etc.
My laptop is pavilion g6 2255eo
View 1 Replies
View Related
Mar 25, 2014
Have an HP DV8110us Pavilion notebook purchased in 2006. Running XP SP3. Upgrading to Windows 7 with a clean install. Ran the MS Windows 7 Upgrade Advisor. This notebook has the AMD Turion 64-bit chip running at 1.8 mhz. I have 2 GB memory. Looking through the Win7 options, I decided to order Win7 32-bit, since I'm only carrying 2 GB of memory. Win 7 64-bit seems to be happier with 4 GB. While the Advisor shows I have some drivers that need updating after Window 7 is installed, I just noticed that the Realtex RTL8139/810x NIC needs a new driver for 32-bit Win7, but under 64-bit Win7, the NIC is compatible.
Should I have ordered the 64-bit Win7 ? Or should I look around for a new Realtek driver ? Realtex has a link to an old Vista driver that should work. Other searches suggest that a workable driver might be on the Win7 DVD.
View 4 Replies
View Related
Mar 8, 2010
Dell is sending me a replacement SXPS16 (the 4th one. The previous 3 have been SXPS13's that have all been defective).
I genuinely hated all the bloatware on the 13's, so would you guys advise doing a fresh install on the 16?
The computer comes with the proper disc to do that, right?
View 10 Replies
View Related
Nov 1, 2009
I have a Studio 15 (1535) and did a clean install with Windows 7 (32 bit) and now I'm in the process of reinstalling my programs.
I used Windows 7 Easy Transfer so I can keep track on what needs to be installed and boy this program is slick.
I didn't install all the Dell software that came with the computer but selected what I wanted
View 5 Replies
View Related
