So I guess two questions wrapped into 1:
1. If I clean install Win7 on this Z, what isn't going to work right off the bat and what steps can I take to get it fully functional? I saw a nice guide for the TZ, but not for the Z.
2. Has anyone attempted a straight upgrade to Win7?
installing Windows 7 on CR series that I may have missed?
I'm basically trying to get the AV buttons and FN keys to work, everything else seems to be detected by Win7.
I have a Vaio VGN-CS16G/R and why is is that after installing Win7 RTM x64 and installing the necessary drivers, I DON'T see the "adjust brightness slider" on the power options? With my other laptops with the same OS, I can see that slider completely.
Also, I when I install Vaio Launcher which I got from the extracted Sony Notebook Utilities installer, it returns an error of:
" Error Number: 0x80040703
Description: Failed to find DLL function: SnyUtils.SuOpen
Setup will now terminate. "
Are there workarounds on this?
I have a fresh copy of win 7 ultimate (legit of course.. got it from a microsoft event).
I have seen a few threads about clean installing vaios (boy do they put a bit of crapware there...) but not sure whats best to do..
I dont think I need/want any of the free apps (are there any good ones?) so I reckon I am going to blast the harddrive (I imaged the whole lot with another backup prog)
Whats the best strategy for this? i.e. whats best for getting drivers etc?
I noticed some files in c:windowsdrivers (an exe and a inf diretory, not sure which is for which) should that contain all I need?
Will I have issues with sony system stuff?
Also what about registering it? I guess there will be no issue as far as warranty is concerned (as said, it is a proper legit win 7)
SZ Series Windows 7 Clean install (32bit and 64bit)
Primarily for the SZ750, but works most other SZ models.
Yes, it's long, but it overs a lot and makes it very, very simple.
A Note about the "new" Sony utilities on their website.
Don't bother, you end up with FAR less functionality than you will with this guide. Sony simply put up utilities that work with Windows7, they didn't check to see if there is a driver to allow them to work.
Contributors who helped fine tune this guide:
Rachel, James007bond, Jtravers, Jupillam, Aralos1999, CKF92
Status:
32bit 100% working – Use the Vista drivers and Utilities.
64bit 99.9-100% WWAN is possibly working (depends on the model, see below under “issues”)....................
Is there any possibility to interact with ePower in Windows 7 clean installation? In original Vista that came wit notebook it had tray icon, but when I install this app in Win7 from provided archive (ePower_Acer_4.07.3008_Win7x86x64), there is no tray nor any launcheable app, even through there is epowertray.exe running in memory. An when I press ePower button (green battery with leaf), nothing actually happens, only indication is that icon is green lit and if I install launchmanager, there is visual indication on display too...
View 5 Replies View RelatedI'm wondering what order do the drivers and applications have to be in to do a Windows 7 clean install for the i7 F series?
View 10 Replies View RelatedI have a Sony vaio FW21M
it has the mata bd-mlt uj230as basically the blu-ray drive......
I was wondering if anyone has the correct driver for this because I can't seem to play any blurays and can't burn anything with it, it just works like a normal dvd drive, does nothing else
I did a clean install so i need the firmware, I tried all the links on this forum and can only find the UPDATE for the driver not the original install..........
I was searching for a Thread that has some data about clean instructions and restoring all functions for the VAIO E-Series, but I didn't find one.
And since there is a lot of users here who own the VAIO E-Series, I think it might be useful.
So, can anyone share his experience with a clean install on the VAIO E-Series and how did you do that?
Some special order in installing drivers? What's about the FN-Buttons? Whats about the Assist and WEB Buttons? Are they all working?
i just reinstalled winxp sp3 on a sony s3xp, i don't have the vaio installation cd but i did a clean reinstall of windows xp and installed essential drivers but it was quite slow, eg seconds to load a directory, or long pauses during web browsing
now i've installed all the original drivers and utilities and am running without power saving but it's still sluggish, eg the mouse pointer jumps about the screen rather than moves continuously when the cpu is under any load at all
THIS IS FOR WINDOWS VISTA 64-BIT ONLY
My system is VGN-AW190.
There are already a couple of "guides" floating around that describe how to install a clean copy of Windows on Sony laptops.
The process is fairly simple and involves installing certain Sony software and drivers in particular order (according to Sony).
For FW series, the guide is here: Official Vaio FW Clean Vista Install Guide
When I first installed Windows Vista Ultimate, I had no problems getting everything to work EXCEPT for the following:
1) CompactFlash (JMicron JMB368 ExpressCard CF) driver is not available on Sony's web site. When inserting the card, it does not show up as a drive in Windows Explorer. After some time playing around, I figured the following 2 ways to make it work:
a. Insert your card, go to device manager and click on "scan for hardware changes"
b. Boot Windows while the card is inserted
2) SD card slot works but is not mapped to any drive. While Ricoh MS driver automatically creates a drive, there is no driver on Sony's web site that would do the same for SD slot.
Sony's support is useless to a point where they told me that the reason why my CF cards do not show up and there is no drive mapped to the slot is because the laptop does not support cards larger than 4GB (and I have only 8GB Sandisk cards) What a joke. I finally managed to get a 2nd tier technical guy on the phone who said that Sony does not provide CF drivers and that there is nothing they can do about it..........
Let me first start by asking your forgiveness if I have stuffed this quick little guide in the wrong spot. I spent a rather brief 10 minutes searching this forum, and I don't believe I am repeating a write-up someone has already done that follows this simple method. If I am incorrect, I ask a moderator to please place this post in its proper home. As you can see, I am not an avid poster here, and I really don't want to be slammed for not searching with enough gusto, etc.
Alright, on to the quick 'n easy...
I have a new VGN-AW235J, so proceed with courage and fortitude if our letters don't match. I found this as I was trying various ways to cleanse this beautiful machine of it's bloatware. It worked for me, and that is all I will claim.
This method requires that you create the restore DVDs.
If you don't have a handful of restore DVDs, go do that now and come back...and while you're up, bring a snack.
One more disclaimer: I didn't take the greatest notes while doing this, so my instructions may be sufficiently vague to cause minor trepidation on the part of the reader. With that being said, each step should be fairly obvious while in front of your machine...DVDs in hand..........................
I researched I need the Intel SATA AHCI Driver for performing a clean Windows 7 installationÂ
Â
I tried:
Â
1. Mobile Express Chipset SAAT AHCI controler drivers from the (a) Intel websites (b) Lenovo website and (c) extracting drivers from running system
2. tried supplying drivers on DVD/CD and USB
3. tried to integrate drivers into Windows 7 Installation using RT7Lite
4. did bios update
5. switched from AHCO to compatible mode
Â
In any case it finds the driver as the correct one (when I click hide drivers that are not compatible, the one remains). But always displays no driver found and doesn't continue setup.
Â
This seems to be a bug!!!
1. Is there a way to fix this and perform a clean Windows 7 installation without recovery?
2. Am I trying the wrong driver, but have to install a driver for a different device first???
Â
I am about to replace the HDD with an SDD and there can not use recovery!
I just bought and received a y410p with the hybrid drive. I have a 120gb ssd that I would like to make a fresh install on. Where do I get both the iso and the window's key? My box didn't come with any disks or windows key. I don't really wish to just clone the hdd since there is so much lenovo branded junk included. What are my options?Â
Â
Edit: Would I also have to install all of the drivers separately? I've not used windows in some time now. I've been running linux for quite awhile and it picks up most hardware without dealing with drivers.Â
I just tried to install wiindows 7 on my z540, I already installed all drivers downloaded for sony's website, but the function keys still are not working.
View 3 Replies View RelatedI've recently successfully installed Win7 on my S170 and I'd like to share my experience with other S series owners. The how-to guide is posted on a different forum so I'll post a link to that. I hope it is helpful since Sony will not support this install even though the machine is fully capable. [url]
View 6 Replies View RelatedI can get Vista 64bit business from school for free and was wondering should I just format my computer completely,
removing sony's partition, and just download all the drivers off the website.
My FW465J/B we'll be here tomorrow and I think that is the best way to approach the bloatware provided by sony
X140E model 20Bl.Attempting to do a clean install of Windows 7 Pro 64 bit. In BIOS set UEFI/Legacy Boot to "Legacy Only". Secure Boot is set to "Disabled". SATA Controller Mode Option is set to "AHCI". I boot from an external DVD drive. Windows Setup loads. Select "Install Now". Pick "Custom". Select "Drive Options". Delete existing drives. Select "Load Driver" and browse CD where I downloaded and unpacked the AMD AHCI W764A driver.After driver is installed, go back to Win 7 Pro DVD, click "Refresh" and "Next". Windows Copies Files and goes to "Expanding WIndows Files". and at 4% freezes. Mouse does not move and system is locked.
View 2 Replies View RelatedNew Z coming. Model 899 w. BluRay, GPS, Win 7 Professional. All the doodads. how to clean install before we actually use it? I assume that this will come LOADED with a lot of junk software clogging up the system.
View 3 Replies View RelatedI just bought a CS-215J and did a clean install of Windows 7 x64 RC. This is my third attempt now because I can't get everything working correctly. I'm able to get all the drivers installed and components in working order, but I can't for the life of me get it to install the Sony Notebook Utilities so that I can use the touch sensor media controls. It launches, looks like it's installing, asks to restart and once the computer boots back up it starts the install again. But once it gets to that point, the window just closes and the only thing that installs from the Utilities is the Event Service, nothing else. Is there a certain order I should install the drivers or something specific I should have installed before attempting to install the Utilities?
I have tried installing Vista x64 and still come up with the same issue, so I don't think it has anything to do with the Windows 7 RC.
my sytem setup after a clean install of vista home premium.
I think I loaded all the driver ect after the clean install as per the instruction in a post on this site, I then istalled SP1 on.
My first question is that when I boot up the system it boots fine to the desktop but then the HD disk light stays on for a good few minuets with CPU usaged in the 3%-10% ranged will this is going on, after that the HD light just flikers constantly......is this right?
2 Should I load Sony update prgram and run it and Windows update?
3 I have not loaded any Sony stuff so no keys like eject or BluRay etc work I cant seem to find what drivers are need and I dont wont to load all sorts of stuff on as that would defeat the perpuse of a clean install. I have only 50 processor runing after booting up
I ahve a few other thing i like to ask but I will leave that for another post as I think thats enough question for now!
I picked up my new Z112GX last night and today after making sony's recovery discs i wiped and started a clean windows 7 professional install.
After this guide you should have a clean windows install with no "yellow" devices under system.
Windows 7 X64 Professional ISO: http://msft-dnl.digitalrivercontent..../X15-65805.iso
Then use the key on your machine. It will give activation issues jsut run through the automated phone activation and you will be fine. SEE BOTTOM POST FOR EASIER METHOD
DRIVERS: http://esupport.sony.com/US/perl/swu...PCZ112GX&LOC=3 .....
I purchased a Sony VAIO VGN-Z46GD and was eligible for the Windows 7 Upgrade program. So my Windows 7 Disc & Supplement Disc arrived in no time. I did a CLEAN install with the Windows 7 Disc wiping everything (this was intentional).
The problem is the Supplement Disc will not run at all, gives me an error (is there a way to force it?). I used the mod2wim tool to extract all WIM's from it however I have had no success in getting my VAIO special buttons working, power management or my function keys operational. The extracted WIM's are also a bit odd, includes ATi drivers when clearly my machine is hybrid intel/nvidia.
From what I have read on the Forums I need to install things in a specific order. Also if I can't find my drivers where can I look to re-download them?
I just need to get this one more thing clear:
I'll buy the VGN-Z540NAB and put in 3 GB of DDR3 ram and a 120 GB Vertex SSD drive.
But - I have been wondering how I am going to do the harddrive part - this is my plan.
1. Make a clean install on the old haddrive as soon as i get the notebook using this guide: Sony Z series 32bit Vista Clean Install Guide (full functions & no windows activation)
2. Make a back-up image of the harddrive using Storagecrafts shadow protect(http://www.storagecraft.com/products...rotectDesktop/)
3. switch to the new SSD harddrive
4. load my back-up image on the clean new SSD harddrive.
5. and i'm ready to go
1:Fan never shuts off. Battery power or ac power
2. XP will not go into standy hibernate
3. Cusor jumps around when typing. I had to type this several times.
Where can I get Sony Advanced Power Management? Links on this board are dead.
I just performed a clean install on my vaio Z until I reached where I install the Battery Check Utility...now I keep getting this message!
"The installed battery may not be properly connected to the computer or may not be compatible with the computer.
Click "OK" to enter Hibernate mode and reinsert the battery!
What the hell is that? I have never removed the battery or done anything to it..the laptop was absolutely normal before the clean install!
My laptop top is not usable now...even though it's on ac power I still get this msg
i just Got a new hdd and i dint want to restore the laptop with the restore cd so i did a clean install of windows vista ultimate 32bit.
I have everything set up beside my fn keys wont work. also i will like the quick button keys to work as well as they did before. you know wen you raise the volume you can also see it on the lcd. but my main priority its the fn keys for Brightness.
I have a VGN-790P notebook, currently with Windows Vista Business installed; 2GB RAM; 2.16 GHz centrino duo. However, through my school I can download Windows 7 for free!
I really want to upgrade my OS to Windows 7, but Sony is not providing drivers for my model. Is there any way that I can still install it and get the drivers from somewhere? I really dont want to do it if it's going to cause a bunch of functionality issues.
Also, I think that a clean install would be best, just to clear out my computer and possibly make it a bit more responsive. Is it possible to do this if I will be downloading Windows 7 and not have a physical disk for the install?
I just did a clean install, and everything is working fine, except for it seems video files are looking a bit washed out. I have noticed that Catalyst Control Center is not installed, could it be related to that? And is it possible to install CCC after a clean install?
View 3 Replies View RelatedI've recently ordered a Sony CW with all the bells and whistles. I was quite reluctant at first to by a Sony, due to all the software etc that it comes pre-loaded with, but (my wife anyway) fell in love with its look and so we now have one on its way...
My question is, for a relatively novice IT person - although not a complete muppet! - the 'clean install' looks rather complicated to me and the risk of something going wrong rather scary! In this regard, can i not simply use the add/remove applications function in the control panel?
If this were an alternative otion, which programmes are the ones i dont need!