I've been reading the forums for awhile and recently just got Windows 7 Ultimate 32-bit. I ran the upgrade advisor from Microsoft.com and like many others I have the issue that my graphics card is not compatible with Windows 7
View 8 RepliesWindows 7 (x64) Professional vs. Ultimate
Which one do you guys think is/feels faster?
Anyway, it's easy and free to upgrade from the original Professional edition to Ultimate on VPCZ1...
I just received my sony Z1190X(CTO) and plan to do clean install on it. I just finished making the recovery&restore DVD and have Windows 7 Ultimate ready.
However, when I go on the US Sony website, they say some drivers are not compatible with Ultimate version. I downloaded every drive with Win Professional setting. Will it not work with Windows 7 Ultimate
I own a vgn-SR190. I recently had HD failure, so had to buy new HD and reinstall vista. My original version of Vista was Business 32-bit. I didn't make a recovery disc. So I went out and bought vista ultimate 32-bit. Figured I wouldn't have problems, but I did.
I'm having the driver issues that someone in another thread talked about, when you get the problem with vaio mode switch and the battery issue. I downloaded the drivers for Vista Business, figured it would be the same for Ultimate. But I just read someone's post here that the home premium 32-bit drivers are the same as the ultimate 32-bit drivers. Is that true? if it is, I would just have to download the home premium drivers. I just wanted to know if anybody knows for a fact that the home premium drivers are the same as the ultimate drivers, seeing as the business drivers are obviously different.
For those that use Windows on your Mac's, which version do you recommend? I'm thinking, what's best for battery life, performance etc..
I have a copy of Windows XP Pro SP3 and Windows Vista Ultimate SP2. I'm tempted to go with XP for simplicity, and the fact that it has equal compatibility and a shed load less intrusive DRM.
Been ages since I have been here but have a question. I am running 64 bit Win 7 Ultimate and have 2 issues. One is the drivers for the sound.
They don't let the subwoofer activate. Sorta like when Vista installs the default driver.
and 2 I would like to know how to get rid of the smbus exclamation in the device manager
I'm looking at purchasing another Dell laptop, but more basic than my current Latitude E6500. I had a Inspiron 15 perfectly configured, except for the operating system.
Apparently, Windows 7 Home Premium is the only available choice for an operating system (with or without a Belkin easy transfer cable). I was first shopping through SMB.
When I called them, they said I'd need to purchase through Home & Home Office to get Ultimate. However, after checking there, I see it's not listed as an option through them, either.
I went back an checked on Latitudes, thinking that it should be offered there, as Latitudes are more of a business-class model. At least through SMB, apparently Ultimate isn't offered on the E5400 or the E5500 - only the E6400 and E6500?
Could some one help me out with this i mean it's not a big deal but i'd like to know what i did wrong maybe
i installed an old driver? Anyway this is the driver i've currently installed: driver R200184 for Nvidia Geforce 8600M GT version A0
I'm the owner of a Pavilion G6 2327SL. Unfortunately, being not familiar with Windows 8, I have formatted it in order to put Windows 7 Ultimate. You can understand my frustration when I discovered that the only drivers you grant for my notebook model are for Windows 8! I tried to search drivers manually but I've only found the one for the graphic card on AMD site. I need drivers for ethernet, wi-fi, and chipset (my usb don't work without them).
View 3 Replies View RelatedI am very interested in purchasing a new Sony L series ( all in one ) computer that comes with Windows 7 Home Premium installed
View 3 Replies View RelatedI recently bought the upgrade but this is the first time I am upgrading Windows as I usually do clean installs. Is there anything I should pay attention to? Are the drivers already there for Win7 and are there any known issues?
View 10 Replies View RelatedMessage that Keyboard Filter driver will not function is obtained during compatibility check during install of Windows 7.
How can I correct this? Do not want to install 7 and then have a keyboard problem.
dv5z cto1100 running Vista Home Premium x64 is current OS
attempting to upgrade install to Windows 7 Ultimate x64 Full *I'll do a clean install at later date*
laptop hp pavilion ze 4800 windows 7 ultimate...My hp pavillion ze 4800 has not sound with windows 7 ultimate, I know that HP support service does not include drivers for windows 7 on this product only for windows xp. Nevertheless this Laptop has enough resources to run a windows 7 operating system except for the video card, but it's not much important for I use it to make common task only, moreover microsoft stopped supporting windows xp and if this Hp can take a windows 7 So why to make it useless.the audio driver for my laptop running windows seven.
View 9 Replies View RelatedI just bought a new notebook HP 650 and I tried to download the Synaptics Touchpad Driver for Windows 7 Ultimate 32 bit from your driver support website, but I wouldn't be able to download it - it wont begin automatically download the driver but instead it jump to different HP support page with language selection...
This model has touchpad with a little dump in upper-left corner, that should be a on/off switch, also there is a led diod indicator - but it didnt work now.
So I'm asking you, where can I download this driver for my win7?
I need wireless driver for windows 7 ultimate 64-bit. My laptop model no is hp 15r-006 tu.
View 3 Replies View RelatedI am using HP d103tx model running in windows7 Ultimate. But I am not able to use Bluetooth service at all.
When I am trying to send a file using bluetooth, no bluetooth is detected though I switched on my phone's Bluetooth. My phone is also not detecting my PC.
I have a sony vaio VGN-FZ470E model and I was wondering if it can be upgradable to Vista Ultimate x64.
Are there drivers for this model, if yes where would I be able to download them.
Is there a a guide or a faq for brining Z698Y from Vista Ultimate 64bit to Vista Ultimate 32bit? I'm looking to do a clean install but with out loosing any key VAIO controls / drivers
View 6 Replies View RelatedVAIO Z ULTIMATE UPGRADE PROJECT
I am starting a massive update project on my Vaio Z now that I have collected all the necessary parts. My Z is a VGN-Z27GN and the current configuration is with a 2.53GHz CPU, 4GB RAM, BluRay burner and a 16GB Mtron Pro 7000 Solid State Drive (when I originally ordered it I a couple months ago I had the standard 320GB hard Disk replaced with the SSD). Though it's only 16GB it works for me as I only use it for the OS itself, all my data and files are on external disks.
My current upgrade project now that I've gathered all the parts is:
- X9100 3.06GHz Extreme Edition CPU
- Kingston HyperX low-latency DDR3 SODIMM 4GB
- Solidata X1 SSD 32GB (currently the fastest 240MB/s read, 220MB/s write SSD)
I am posting here a brief benchmark set on Everest with my current configuration and will after the upgrades repeat the tests. I am running Windows XP SP3. Boot-up takes approximately 14 seconds and overall as it is the system is extremely fast and ultra-responsive. As you can see by both the base system's performance and the current Mtron SSD, the numbers are really good as they are.
So, I am eager to see the tests results after the upgrade is complete.
Here's my dilemma:
I have no clue how to open the Vaio Z and get the CPU or the SSD inside (replacing the RAM is obviously a no-brainer). So, I would like to request help (ideally a step-by-step thing) on how to crank the Z open to access the CPU and the HD compartment. I do not have the faintest clue on how to do it.
I just installed Vista Ultimate on the hard drive partition of my Sony Vaio Notebook (VGN-CR4000). The other partition has Vista Home and is working fine as it came with the original laptop.
I am not able to see any wireless networks to connect to the internet on the Vista Ultimate OS. This is because I do not have the drivers.. right?
I tried to find drivers on the Sony website, but there are none for my model. What can I do?
Just received my new CTO Z-690 today with vista home premium (64 bit), and to save a little on cost, bought an OEM Vista Ult 64bit separately.
Now I'd like to install vista ultimate instead and i just want to make sure i have the steps right.
1. backup/create recovery disks just in case something messes up.
2. install vista ultimate, wiping out everything
3. install drivers from sony's website
lastly, 2 questions
1) since my current drivers are for vista home premium, i will have to download new ones regardless right?
2) is there anything else that i should be doing?
which one is faster to use on the Sony AW series..
I'll be making Blu-Ray disc, Audio CD's, and DVD's..
There is no driver for Vista Ultimate on Sony website..
No webcam, wireless, burner, graphic.. etc..
Have a Dell 11z (1110) running w7 ultimate (x64) with all the updates, and cannot adjust the sensitivity. Problem is when typing, the slightest brush of the touchpad causes the cursor to jump. And I mean the *slightest* touch! A mere brush of atoms on the touchpad causes the cursor jump. I have read and tried many of the suggestions form Dell and Windows communities, and nothing works. There is no touchpad sensitivity - anywhere!
Here's what I've tried:
1. Hide pointer does not work. Unchecked and checked the box several times. No effect. There is no adjustment from within the "mouse properties". Trust me, it's not there.
2. Dell offers both the Elantech and Synaptics drivers. I am an experienced Synaptics user. I only want the Synaptics one because it supports standard scrolling on the trackpad, among other nice functions. The Elantech "gesture" is junk (I am surprised that Dell offers it, but that's a topic for another
day). The Synaptics driver should offer a nice suite of tools, among which is a touchpad sensitivity tool: it's not there. The only capabilities that show up are "buttons". I removed and reloaded Dell Synaptics drivers several times, rebooting after the uninstall every time. Nothing but the simplest tool is available.
3. I downloaded the drivers (several in fact from various releases) from Synaptics and got no improvement. The touchpad is not adjustable.
4. In desperation I installed the Alps driver, and although it functioned ok it did not have the any capabilities beyond Synaptics.
5. I downloaded several drivers from other vendors and got the same result: no touchpad sens adjustment capability.
6. Tried several 32 bit drivers: some installed (probably because they had a hidden 64 bit install option). No change!
So bottom line: I cannot adjust the trackpad. No matter what I do.
I have a Alienware M17x R3, Windows 7 Ultimate 64 bit that uses DDR3 PC3-10600 1333MHz. I have 4 2GB sticks of RAM. I've actually found myself using programs that max 8GBs out. So I bought my self 4 sticks of 4 GB DDR3 PC3-10666 1333MHz RAM.
For some reason my system doesn't want to accept the new memory. The BIOS sees that i have the correct RAM in each slot, but windows never actually starts up It'll either just get to the system loading screen, then shut off and automatically come back on and just keep doing that. Other times, i'll get a blue screen that just flashes for a second and shutdown halfway (The lights stay on, but nothing happens). I've just tried two sticks of RAM at a time and still nothing happens. I've called Dell support, and they said it should work just fine.
I just installed a new OS and I cannot get on the Internet to download any drivers. Apparently the system does not see the Ethernet card.
Drivers for this device are not installed. (Code 25)
Location PCI Slot 5
I read about uninstalling and reinstalling the driver for the Synaptic product. Would uninstalling the driver leave me without any mouse funtionality in the mean time?
My product # is FN067UT#ABA
I have a Dell Inspiron 1440 that won't boot now. Using WinVista Ultimate and needed to reboot but it hangs after the Dell logo/Inspiron screen with the white status bar is completed at the bottom of the LED screen. I removed the 500GB HD and inserted a new 1TB Win7 Professional that I've been working on for the last couple of weeks and it won't boot either. Same situation on both HD (2 Win OSes on same laptop with same issue). FYI, I have 8GB RAM in the laptop (been that way for couple of years) but I don't suspect the RAM as the issue. I do have 2-2GB RAM DIMMs that came with the laptop initially in case that's a test I need to make.
Functionally, it appears like the boot sector on the HD isn't "available" but I've tried two (2) different HDs and I get the same issue. Hence, I think it's not a HD issue.
What IS the issue and what are my options? Laptop appears to be fine otherwise. New motherboard? $$??
Pressing F2 or F12 doesn't get me anywhere at startup time either.
I recently purchased the new VGN-Z690 and thought i would save some money by ordering it with the Home Premium (64bit) OS since I already had Vista Ultimate disks. I went to do an upgrade by installing the Ultimate disks, but the option to upgrade was greyed out.
The only option was to do a clean install, which I want to avoid due to all the other software that is on it already.
I had got a VAIO NS15G a few days back with Vista Home Premium pre-installed.
I have just upgraded to Vista Ultimate. But after installing the FN Keys for volume and Brightness are not working.
After installing some software from VAIO website, it was under support downloads, dont remember the name, the Volume key is working perfectly (fn+F3 and F4)
But brightness is not working. It shows the brightness metre on pressing the keys but doesnt change or adjut the brightness.