Since many people don't have opportunity to see these laptops in person, it would be nice to see some photos from the screen. It would be nice if some could post pictures from dual lamp screen too, so we can compare the difference.
I've got an XPS M1210 with NVidia GeForce 7400 and since last week all the pictures/videos appear blurry with artifacts, … somehow like watercolor books or with burn efect pictures. Other observation: on the Windows locking blue screen, instead the clear light blue on upper left corner, I can see something like a sun with round circles around effect. Also, on the starting black Windows screen, the words are not shown clear. See the attachements as examples.
I tought is from a corupted driver, so I rebuild the system but, without luck. Even I opened the laptop and checked all the connectors plus clear the dust but, with the same bad luck. Also I replaced the LCD with a new one but again the problem is still there = I've got one new 12.1" LCD for sale now.
I connected another monitor and also a HD TV to the laptop and on these, the pictures and video are perfect.
The BluRay drive in my Z11 died sometime last week (UJ242ABSX2-S). After some deliberation, I've made the decision to sit on the warranty claim for now and replace the drive with a 1TB WD hard drive (yes, I know is it 12.5 mm. I believe it will fit).
Simply put, I don't need an optical drive but since the drive cost $500, I'll have it serviced at some point, just not now.
While pulling the BR drive from the Z11, I thought I'd give the BR drive from my Z591 a go in the new machine (UJ232A). It fit in the chassis as you would expect, but you can't fully screw it in place (easily fixed with some sticky tape). It functioned fine; read/write, keyboard eject button, etc.
Also, I believe the faceplate from the X will work with the Z11 with some light modification to the plastic clips. Doing this would be permanent, so I didn't try.
If you haven't noticed already from my other posts, I have little to no hesitation when it comes to pulling stuff apart. This is further reinforced when I pulled the UJ242ABSX2-S apart to take a look at the internals.
I am considering some laptops and the sony vaio is one of them. I have heard great things about the screen but it is glossy, something I have sworn off all these years. I have seeing reflections on my screen. how the anti-reflective screen performs?
Overnight a problem with the screen on my Sony Vaio FZ has become apparent. A think multi colour bar had started to appear at the bottom of the screen. I am not entirely sure if the problem is related to the 8400GT graphics processor, I have had a preciously faulty one replaced which I hope reduces the likelihood that the graphics processor is the culprit. I am just going through now backing up my data in case the fault spreads further. My eye sight may not be sharp enough but it may have expanded.
Note that in the pictures attached it appears green but when I have something else up as wallpaper, or a program open, the colours change to reflect in some way what is on the rest of the screen. For example when I have word opinion the blue background appears black on the bar, the text area is a shade of grey. Also, my taskbar is not that thick. My available space on screen has not gone away as much as the fault bar suggests it should have, it is as though my screen has adjusted in some way.
I have Sony VAIO VGN-AW360J. About two weeks ago I noticed something weird with the brightness regulation of the display. When I tried to change the brightness
(always set up to the maximum) to a lower degree using the keys (Fn – F5) a high pitch noise can be heart coming from the screen (to be more exact -
from the lid of the laptop, below the VAIO logo), and it is very noticeable in a quieter environment. Continuing lowering the degrees of brightness would cause higher or less noise. The nosier setting is at 90% of brightness
I have a Sony FS VGN-FS640 Vaio laptop and when i boot the laptop all i see is the Vaio logo and then the screen goes blank nothing happens! how can i bring the windows back? This laptop runs winodws XP.
I purchased a Vaio Z about 2 weeks ago. Last night, I brought the notebook out of standby and after a few minutes of working with it, I noticed a vertical region on the right side of the screen that would dim and comeback on again, just like you see with florescent lights when they are faulty. There was no specific pattern to it, just random. I turned the notebook on and off, and the problem seems to be gone. I was wondering if anyone has ever had this problem before or know what it is.
I would like to know if there's a way to remove the liquid under my LCD screen.
At first there was a big circle with a diameter of 3 inches. then after leaving it idle for about 3 or 4 days, the circle shrinked with a diameter of 2 cm. after that, I left the computer alone for another 4 days and that 2cm circle is still there. i turned the laptop and viewed the screen at a 45 angle and i see one normal drop of water and many small drops in that one area.
should i wait until it dries out? or should i disassemble the screen?
- considering there's no air or anything in the LCD screen itself, i dont think the water will disappear anytime soon. possibly 2 or 4 months? lol =(
water came in contact with the SCREEN only, all other parts (keyboard, speakers, cpu, etc. are CLEAN)
I just got a z11 and will be returning my macbook pro soon.
The only thing that is making me hesitant is the screen brightness of the z. With the plug in and full brightness, it's not that bright, at least NO WHERE NEAR as bright as the macbook pro with high res anti-glare. Is this normal?
How many of you Z owners find the screen brightness too low? Even at full, it feels dim.
I have a Sony Vaio Laptop. Its warranty ended 7th December. Phoned them to get it picked up and now they have it so any work should be covered under warranty.
There is a particle under the screen. I took a picture of it and emailed it to Sony who diagnosed it as dead pixels. They said they would repair it for free under warranty.
Now that they have the laptop they say there is a particle under the screen. They sent me a picture of it and the photo looks identical to what I sent them earlier which they diagnosed dead pixels.
Now they are saying it was accidental damage by me and want to charge to replace the screen (same price as I paid for the laptop).
I think that this is ridiculous and that they should repair it under warranty. They will not accept these two arguments: 1. If I damaged it then I would have had to have opened the screen which there should be evidence of. 2. If the particle got in some other way through a gap then it is a manufacturing flaw because there should be no way of a particle getting in there.
fairly old Vaio laptop. Can barely get past start up screen. Half the time all i get is black screem when i turn it on. I can get into windows though after a few attempts. I would like to completely reformat it, preferably putting on xp or even the new Windows 7. But i dont have any boots discs. So i don't know how to go about doing it. A breif step by step on how to wipe my laptop would be perfect.
Today my 2 week old laptop was closed, put into a fully padded laptop bag, Velcro strap over to hold it in place. Nothing else in the bag. Put in car, drove 80 miles, took out of car and setup. It noticed a small mark on the screen right where the screen folds down to the track pad. It seems the Back ridge of the track pad, has pushed onto the screen creating this mark.
Has anyone else noticed marks on their screen caused by the ridge that sits just above the trackpad?
I always ensure that the screen is against a folder or other flat surface in my bag so that it is protected from pressure. I have previously had screen damage to other laptops caused by keyboards and parts of the inner surface rubing against the screen when the laptop is closed.
In the last few months I have seen marks on my Z11's screen in the form of a line across the screen 2/3 of the way up where the ridge between the trackpad and keyboard occasionally presses against the screen but they had always wiped off. Yesterday I went to wipe them off and it seems as though thay are permanent
On a cheap laptop bad design like this is acceptable but on something this expensive it really isn't OK!! Especially when they market the screen as being resistant to marks...
Recently I have noticed that at the bottom of my Sony FW screen it gets quite hot. It gets hot where the Sony writing is, all the way along the bottom, where I think the screens inverter is located behind.
Also If I run my finger from the bottom of the screen, upwards, towards the top, it gradually goes from warm to cold.
Is there something overheating or would this just be normal?
I just got a Vaio VGN-Z890 off the sonystyle website. As soon as i turned it on I saw a red screen with a pixelated windows symbol. When I got to the desktop screen it looks like there's a red tint covering the whole screen, kinda like someone put red cellophane over it. I thought it was the video card so I updated it from the drivers on the sony support website but I got the same result. I hooked it up to my 32" Samsung tv and it looked beautiful with the right colors. So this leads me to believe that it is a problem with the notebook's lcd. The funny thing is, if I go in and change the gamma and other display settings I can get the screen to change to a green or purple tint. I thought that a failing lcd screen could only be red?
-Also, although I am mechanically inclined, I'd rather let sony open up the laptop and check the gpu connection, lest they blame any problems on me in the future for tampering.
I just received my Vaio Z this past weekend! Everything works great, but I did notice that my screen flashes once when I boot into windows. Is this normal? I did do a full system recovery with the option of not preinstalling extra software (don't need excess things on the laptop); I do not think this is the reason, but I do not remember if this happened before.