Has anyone installed XP on their Acer 1410 and got the hotkey software to work
properly? I can get everything to work (sound/bluetooth/video out) except lcd brightness. FN + left or right arrow key does not do anything.
I know that the Fn + Brightness key issue on XP has been mentioned in other 1410/1810T threads, but I thought it might be nice to start a thread specific to the problem. After it's fixed we can add it with the other stickies.
I recently installed XP on a coworkers 1810T and because i'm interested in the machine myself i wanted to investigate the brightness issue and see if Acer is working on a fix, or even recognizes the problem.
My correspondence with Acer has been extremely frustrating and disappointing. I was considering using the 1810T laptops to replace our office's aging Lenovos but Acer's lack of support has made me majorly turned me off to that idea.
Here's my discussion with Acer, reverse chronological order (start at the bottom):............................................
I did a clean install of Windows 7. I did not load all that crap from the 2nd CD.I am trying to determine which Drivers I need to install.
I installed the VAIO® Event Service and Sony® Shared Library.
What is strange is, when I click on the FN button and press the increase brightness key, the brightness meter does appear on the screen, but it will not go above the lowest setting.
I used the upgrade kit from Acer to do a clean install of Windows 7 to my Timeline 1410. Everything works great and I love this laptop... except that the brightness controls (Fn+Left/Right Arrow) do not work. It's locked at highest brightness.
I am at my wit's end trying to figure this out.
I have installed all the Win 7 drivers from Acer's site, particularly
- Newest bios
- Launch Manager
- Chipset drivers
- Intel graphics drivers
When I first boot it up, the brightness controls work fine during the BIOS steps. But once Windows takes over, the controls no longer function. In the Windows Mobility Center, there is no brightness control panel. [FWIW, my Dell, which does have functional brightness control, doesn't show one either.] All other Fn-combinations, like volume control, work fine.
I can't adjust or change my brightness with the hotkey (F11 and F12) or even with the slider in settings. option brightness of my laptop doesn"t change it is stationary.
View 5 Replies View RelatedI’m trying to solve a problem with an Acer aspire One notebook.
The function (FN 5 ) hotkey button combo do not work, other hotkey commands like volume,sleep,screen blank all work, the note book has an external data show connected to it and it will not connect with the data show using FN5,several different data shows have been tried to no avail, the notebook is running XP home.
I have looked at device manager and there are no yellow exclamation marks apparent.
I have been looking for Acer 7720 hotkey drivers but in vain. Can a good soul direct me to an appropriate place to look in? I've looked on Acer's driver download page but it doesn't list anything regarding hotkeys. Btw I'm running windows 7 (if you can find a driver for vista, it'll do).
View 4 Replies View Relatedhow, when you press the "e" empowering technology button the toolbar pops up?
And when you switch on the bluetooth module, the WLAN switch, and even the FN+UpArrow and DownArrow and the little green text at the bottom of the screen comes up? Well, in my system it's not working anymore.
Last thing I remembered that happened was my Norton IS 2009 detected a virus and prompted to restart the system, and so I did, and then things started to go weird. For instance, the touchpad driver needed to be reinstalled, and then I could see that my startup items DRASTICALLY got reduced, looking at the task manager. I tried reinstalling the Empowering Technology Framework, but still it doesn't work. Any of you guys experienced issues like this?
When I press the wlan or the bluetooth key, the short message is in Finnish. I would like to have that in English or Swedish.
Is it possible to change? How?
The notebook is an Acer Extensa 7620. Tried to find a driver for launchkeys, but no driver is available on their ftp-site for this notebook. Can a similar driver work? And what name has that driver?
I bought an Acer 1410 with default OS of Windows XP. Now I want to install a new Windows. Which windows is better for a good battery performance
Windows 7
Windows Server 2000
Windows Vista SP2
and one more question. Acer 1410 works with x64 or x86 OS?
In August I purchased an Acer 751h, 2GB RAM and 250GB HD. It came with Vista, which was pretty awful, but since I installed Win7 on it, I don't want to put it down because it performs so well. It's BLAZING fast, a great little machine and I absolutely love it.
My mother needs a new computer and she really likes mine. I'm considering giving it to her and getting myself the new 1410 - what do you think? Does the new processor in the 1410 make that big a performance difference?
In the benchmarks I've read, even the single core version (apparently there is also a dual-core 1410) is twice to three times as fast as the Atom in my 751 - that's pretty impressive.
I can only imagine that the 1410 with a clean install of Win7 would absolutely FLY. It would also be nice to have the different touchpad buttons and wireless N.
What do you guys think of the 1410?
Also, is it worth it to get the dual core model over the single core?
Also to confirm, the 1410 has VGA-out AND HDMI? This would save me from buying an adapter for when I need to give presentations, as most projectors are VGA-only.
I just had a blue screen of death (dump screen) for the third time in 2 months and after reboot, i get this screen:
What can i do now? I would like to recover the files i have in the HDD, as i know if i send this to Acer, they'll wipe out everything or replace a new HDD. Can i open the laptop and try to plug the HDD to some enclosure to get the files out?
Will that void the warranty?
In the BIOS, i see:
HDD Model Name: None
HDD Serial Number:
ATAPI Model Name: None
My 1410 has a problem with the display out function. It works fine with both the HDMI and VGA output when the lid is open. However, when I close the lid, the display is okay for a couple of seconds then it flashes on and off intermittently on the display that I hooked it up to. It happens with both the VGA and HDMI output signal. It only happens when the lid is closed, even though I set the computer the do nothing when the lid is closed. I thought it might be a software/driver issue, but I installed the most recent chipset and VGA drivers from the acer website with no change. This is an important feature for me to have because I use the computer with an external display the majority of the time. I am running windows 7 home premium 64bit. Their tech support has told me that Acer computers are set to not work with an external display when the lid is closed.
View 10 Replies View RelatedI have a Gateway EC1803h which as far as I can tell is identical to the Acer 1410 except for the design of the case, so I'd like to ask this to the Acer users since there are many more with the 1410 than the Gateway.
I'm running Windows Vista. I've disabled the ACPI Lid driver by changing the driver to "Volume Manager" as suggested by various internet sources for fixing the problem where closing the lid, even with the close lid action set to "do nothing" can cause the lcd to not turn on again when opening the lid.
So the problem is with hibernation. If I hibernate the machine, then resume again within let's say a minute or so, it comes back up fine. If I hibernate, then wait a longer amount of time, say 10 minutes, I can see the BIOS boot, the "Resuming Windows" splash screen, but then when I'd expect to see the login screen, instead the laptop screen turns off, and I see nothing. Oddly enough, at this point, if I plug in an external monitor, I can see the login screen there, so the OS is running properly. I can even log in. But at this point, I cannot Fn+F5 to enable the laptop screen. It's like the laptop screen has been disconnected/disabled/removed, whatever you want to call it.
Another weird symptom is that at this point, I can usually see a "System" process that ends up taking up 100% of the CPU processing, all of the time (not just spikes), so the task manager basically stays at 100%.
This feels like a software/driver issue to me, but I've been unable to find any other Acer 1410 or Gateway EC1803h users who've experienced this. I've tried the video drivers on the Gateway site, Acer site, as well as drivers from the Intel site. Same behaviour. I'm contemplating exchanging it for another unit, but only if there's a chance this is indeed a hardware malfunction.
I know this laptop was not designed for games and that's not it's primary purpose for me. However, I just wanted to see if we could have a list of the games that are confirmed to work on the Acer 1410.
I'll start. I tried Civilization 4. Works perfectly.
Looking to pick up a laptop/netbook very soon and I am pretty much sold on going with the 3810TZ but now I am seeing a lot of talk about the 1410, which unless I am mistaken, is lighter than the 3810TZ, smaller, faster (not by much but has a 3500 cpu vs the 2700) and cheaper (450, vs best deal I can find on 3810 which is 550). Same features/memory/etc?
Any actual knowledge of when the 1410 will be released? I need it very soon (for a trip in a few weeks) and i cant tell from reading these forums if it will be out then or not until october.....
Is it possible to install an internal bluetooth? is so what is the product called?
View 10 Replies View RelatedI Cant get 5.1 DTS spdif audio on my Windows 7 64 bit 1410 Acer laptop using ac3 with toslink into receiver. I'm hoping my laptop supports surround sound output but I fear it may not. I downloaded the full AC3 version since I'm using 64 bit OS. Under config speakers with windows media center I setup 5.1 speakers and clicked test and I did get a specific sound to all my speakers through my receiver. Also when I click speaker icon on bottom right of screen to get realtek digital output properties/ supported formats - I click test sound for DTS and I also get a separate ping to my 5 speakers. Under realtek advanced tab however I notice default format is limited to two channel.
Under ac3 filter config main tab I set speakers to 5.1 and checked use spdif. Under spdif tab I checked use spdif output format to 5.1. spdif passthrough I checked DTS and AC3. Under spdif/DTS mode I tried all 3 settings- auto/padded/wrapped. I'm only getting 2 channel digital audio. I think AC3 is not working right because while playing a DTS movie I don't see a AC3 icon on system tray and when I turn on ac3 config while still watching movie, SPDIF status says No data and I don't see any green spike bars for audio levals. Do I need to force AC3 to work somehow? Do I need a different mediaplayer to use as a front end? Or do I need additional software/ codecs like hailsplitter or something?
My AC3 must be working a little bit because before I downloaded AC3 mkv's would refuse to play at all. I have divx 7 by the way for video support of mkv's. I noticed even after I downloaded divx 7 for mkv support mkv's still wouldn't play without AC3. I'm using windows media player and windows media center for movies.
As you know the default OS of Acer 1410 is Windows XP, and the battery life is about 6 hours; if I install Windows Vista or Windows 7, how much it will affect my battery life?
View 4 Replies View RelatedI have an old Sony Vaio VGN-FS742/W and just got an Acer Aspire 1410. The 1410 has a 2GB PC2-5300 (333 MHz) stick of RAM. The Vaio has a 1GB stick of PC2-4300 (266MHz) RAM.
I've read that running two RAM sticks of different speeds makes them both run at the speed of the slowest stick. Could any advise whether my 1410's performance would be better by adding the 1GB from the Vaio to have 3GB RAM running at 266MHz, or just keep the 2GB already in the Acer running at the quicker 333MHz?
I'de need a pic of the mobo of a 1410/1810 after the TME mod for overclocking...
View 5 Replies View RelatedI just bought an AS1410 SOLO last month and yesterday it would not boot up at all. Called Acer tech support and they said send in for the warranty work on the notebook.
The thing is I have to pay for the shipping and to send in their defective product. Is it Acer policy? If it is then it sucks. I have a ThinkPad T43p and when I needed to send it in for warranty work, Lenovo sent me a prepaid box and all I have to do is drop the box off at any UPS store. I forgot to mention that the tech support personnel, their attitude are like I don't give a damn about your problem, you're already bought our product and you need our support now. So give it another thought before you buy any Acer product.
I have been trying to load a retail version of Windows 7 HP x64 using USB on my Windows Vista HP x86 Acer 1410. I am able to boot from USB and the Windows 7 install program starts. I select Custom Install to do a new installation (not an upgrade). After I select the partition to install to, I get an error message like "can't find a system drive to install to..." I have tried this on two different 1410's with the same results.
It was the particular USB SD Card Reader I was using. I don't have a 4GB USB drive so I was using a USB SD Card reader and an 8GB SD card. I switch to a different Card Reader (same 8GB SD card) and it worked first time!
I have till Friday to exchange my Acer Aspire 1410 SU 3500 for the SU2300. I am seeing some people show the benchmark is much higher for the SU2300. Of course I would like to have the faster unit and better unit since I am spending $400. I dont do much gaming but I do alot of videos and work. am I better getting the Dual Core or just keeping my Single Core ?
View 10 Replies View RelatedI decided to give the PLL mod a try so I can overclock to 1.7GHz in my 1410. I got ahold of a soldering iron and an old motherboard that I practiced on, and it doesn't seem too bad once you get the hang of it.
Now that I've decided to go ahead, I try to take the case of my Aspire 1410 apart, and with all the screws removed, hard drive, memory, wireless card, I can pry the front of the case open ok, but as I get near the back (fan exhaust one side and lock/ethernet other) It seems locked in place somehow and don't want to break anything.
Is there a guide or service manual or something?
I keep hearing 4 gig support, but Sis soft Sandra tells me my 1410 supports 8 gigs of memory.
I dont know if anyone has commented on this, and just dont have time to comb through the pages on the two 1410/1810 threads.
Intel's website says that the GS4500 chipset supports up to 8GB of RAM.
[url]
Don't the 1410 and 1810 use that chipset?
Has anyone tried running 8GB of RAM in these units?
Anyone who has the Acer Aspire 1410 been able to play Battlefield 2? The game installed fine. Any time I go to start it, the screen flashes a few times like it's loading, then just dumps back to desktop. Has anyone successfully installed and played Battlefield 2 on this machine?
View 10 Replies View RelatedI found a couple other reviews where people said they had a noticeable (more so on dimmer settings, for me) screen flicker with their timelines. I have the 1410 with su2300 proc. Anyone else noticing this problem? It's enough to distract me, which can be annoying, but I'm a bit of a perfectionist when it comes to the visuals.
View 10 Replies View RelatedI have the Aspire 1410 -2285 with Windows 7 and the Celeron SU2300 Processor. The AC power supply clearly shows the specifications as 19 volt, 1.58, amp, 30 watt. I want to purchase another adapter but everywhere I search lists the adapter for the 1410 as 19 volt 3.42 amp and 65 watt. This include Amazon. Can I use this AC adapter with this computer.
View 10 Replies View Related