When I press the wlan or the bluetooth key, the short message is in Finnish. I would like to have that in English or Swedish.
Is it possible to change? How?
The notebook is an Acer Extensa 7620. Tried to find a driver for launchkeys, but no driver is available on their ftp-site for this notebook. Can a similar driver work? And what name has that driver?
I did a clean install of Windows 7. I did not load all that crap from the 2nd CD.I am trying to determine which Drivers I need to install.
I installed the VAIO® Event Service and Sony® Shared Library.
What is strange is, when I click on the FN button and press the increase brightness key, the brightness meter does appear on the screen, but it will not go above the lowest setting.
IÂ have HP Pav TS 10 -e009au
P/N : F6C20PAÂ
There's problem on Operating system, then i use factory reset on recovery manager, but when the process almost finish , language change to chinese..How to change the language to english again ??
I can't adjust or change my brightness with the hotkey (F11 and F12) or even with the slider in settings. option brightness of my laptop doesn"t change it is stationary.
View 5 Replies View RelatedWhat is PerfLogs ? What if I do not meant to be pressed ? Has changed to Computer Settings ? What are the settings that have changed ? How to restore the default settings ? Or it can be disabled ?
View 1 Replies View RelatedI’m trying to solve a problem with an Acer aspire One notebook.
The function (FN 5 ) hotkey button combo do not work, other hotkey commands like volume,sleep,screen blank all work, the note book has an external data show connected to it and it will not connect with the data show using FN5,several different data shows have been tried to no avail, the notebook is running XP home.
I have looked at device manager and there are no yellow exclamation marks apparent.
I have been looking for Acer 7720 hotkey drivers but in vain. Can a good soul direct me to an appropriate place to look in? I've looked on Acer's driver download page but it doesn't list anything regarding hotkeys. Btw I'm running windows 7 (if you can find a driver for vista, it'll do).
View 4 Replies View Relatedhow, when you press the "e" empowering technology button the toolbar pops up?
And when you switch on the bluetooth module, the WLAN switch, and even the FN+UpArrow and DownArrow and the little green text at the bottom of the screen comes up? Well, in my system it's not working anymore.
Last thing I remembered that happened was my Norton IS 2009 detected a virus and prompted to restart the system, and so I did, and then things started to go weird. For instance, the touchpad driver needed to be reinstalled, and then I could see that my startup items DRASTICALLY got reduced, looking at the task manager. I tried reinstalling the Empowering Technology Framework, but still it doesn't work. Any of you guys experienced issues like this?
I got myself a new laptop but it became french not english(didn't get to decide, wasn't there then), but I got the store i bought it from to put it into english. The problem is that when it was french there were more programs like gridvista, eye webcam etc. Now that it's english there none of those programs. So i'm wondering if I should do the eRecovery management thing, will it stay in english with the programs like the french one? or should i ask for recovery disks from acer and tell them my problem?... it's a acer 5920g/5920-6642 laptop...says both on my laptop.
View 7 Replies View RelatedHas anyone installed XP on their Acer 1410 and got the hotkey software to work
properly? I can get everything to work (sound/bluetooth/video out) except lcd brightness. FN + left or right arrow key does not do anything.
I have a Z11WN, bought it in Italy and is running currently Vista Business. I ordered few weeks ago, Windows 7 Home Premium from Amazon.co.uk. Do you guys know if I will be able to upgrade without loosing my files? Or I will have to do a clean install, because the language of the actual OS is italian and the upcoming W7 is in english?
View 4 Replies View RelatedI'm using MAC os 10.6.1 and my MBP region is Russian(Ukraine) I want to set my default language in applications (to type - not menu language) as English. How to do it? For some reason all application start and change my Input Source to Russian every time.
View 3 Replies View RelatedI`m from switzerland, and we coulnt not order custom configs with Sonystyle / CTO - only the normal Sony Vaio configs are to order
When i will find a way to order a swiss-german language keyboard (not same than the german keyboard), then i could order my Notebook from anywhere, and do the work by myself, but have to fight with warranty trouble.
I can live with warranty trouble
Does someone have me an adress for ordering keyboards in other languages?
I work with Japanese language and need to use the East Asian language support that Windows provides. Is there anything similar in OS X? This is a really important think to me. by support, I don't just mean the fonts, but the whole keyboard + IME - writing characters and their recognition. All this is part of Windows East Asian support and works great for me.
View 10 Replies View RelatedHP Envy 15 - Text being displayed in different language?
View 3 Replies View RelatedI bought a new Mac just yesterday (my first time to switch from PC) believing that the East Asian Support in Macs will be equally if not better in OS X than Windows (given that Japan is a huge market for Macs and also that you can even order a Japanese keyboard when purchasing your computer). To my horror, however, I am now realizing that there's a feature where Windows outpeforms OS X, or what OS Xi is totally lacking;
IME Pad - i.e. in Windows when you switch to Japanese language keyboard you have an option to use your mouse to draw a kanji you are not familiar with (don't know its reading). You'll get a lit of options and can find thus a kanji extremely fast - no need for radical or stoke look-up. I've heard that OS X doesn't have this function - at least not 10.5. If that's true this would be a major drawback!
the only solution to this would be to use an internet interface such as this:
Handwritten kanji search at sljfaq.org
But this is way too cumbersome and requires internet access.
how to use Japanese on Macs can respond.
I have a new 2530p here. When I start it up it shows a screen where I can choose what language I want to install of Windows Vista.
If I choose a language, can I later recover the laptop to it's original state, so I can choose the language again?
I have Pavilion dv7-4142eo bought and using in the Sweden. This laptop have Swedish Windows 7 installed. Now I want give this laptop my father which is living in the Poland and speaking Polish language only, so I have to install Windows Polish version. Should I install another drivers? If yes, drivers for Pavilion dv7-4140ew (only this version of dv7-4100 have drivers for laptops designed to Polish market) will be OK? Can I install Windows 8? Generally - what I should do?
View 3 Replies View RelatedSuddenly my keyboard seems switched to a different layout.
Â
When I press ; I get now +
When I press : I get now ±
When I press @ I get now "
When I press " I get now `
When I press  ) I get now '
etc.
Â
So it looks like my Ideapad Z580 has suddenly adopted the settings of another keyboard layout. How I can restore the correct settings?
Anybody know what these buttons do and how they can be remapped? be kinda nice to have a few extra hotkeys...
View 6 Replies View RelatedI have a Hp pavilion dv6-1045ee....
Actually, this notebook has a long history in modifying MBR and BCD......
--SOME OF THE HISTORY--"SKIP IT IF YOU WANT TO"
----------------------------------------------------------------------
My original problem was to burn the recovery disks, as the recovery manager software couldn't see the recovery partition. That's because when I first bought the notebook I wanted to divide its hard disk into several partitions, but that was not the mistake....The mistake was using Partition magic to do so....
It messed with my partition table (I guess).
However, I was able to retore the "LINK" between the recovery partition and the recovery manager software by applying the recovery partition's boot sectors of a friend of mine with a similar laptop on mine.
That was done after alot of MBR experiments to find out how to fix that problem.
So now I can burn the recovery disks, but I wont. The reason is that I want to be sure that the recovery partition functions properly before applying the "ONE TIME" burning process...............
How to install the latest version of the HP HotKey Support softpaq silently, and without a restart?
Â
The laptop I have is a Probook 6570bThe OS is Windows 7 Pro x86The softpaq is: SP59202 (version 4.6.10.1)Â
The previous versions of this allowed for a silent, no-restart installation but the latest one is different.
Â
I can get it to install by extracting the Setup.exe from the SP59202 executable and running it with the switches: /S /v/qn but it always restarts the PC at the end.
How to disable the touchpad on the Latitude E4300 if I have no hotkey and no touchpad icon? Dell themselves won't answer because this computer is long out of warranty.
View 7 Replies View RelatedI just purchased a G505s laptop, and I now realize that the function keys (F1-F12) operate as Lenovo hotkeys by default, and I need to press th "Fn" key along with them in order to get them to function in their original mode. This is not acceptable for my normal usage. I know with other Lenovo laptops, there is a BIOS setting that allows the user to either "disable" hotkey mode, or set them to "legacy" mode, but in the current BIOS/UEFI for the G505s there is no option to do so.
View 9 Replies View RelatedI recently bought lenovo Z50-70 with i7, 8GB ram, Nvidia 840m without operation system. I installed windows 7 64bit and all drivers for W7 from lenovo website. But i cant find : Lenovo energy manager for W7 and Lenovo ATK hotkeys for W7. Hotkeys are important because i cant see how much i turning down or up music. What should i do?
View 5 Replies View RelatedI have a W530 with win 7 64 bit installed. Some time ago I mistakenly uninstalled Hotkey Features Integration for Windows using the windows 7 control panel.
Â
I would like to install it again. [URL] ....
Thinkpad W530 2436 CTO, BIOS Version LENOVO G5ET95WW (2.55 ),Intel Core i7 3630QM, 2.4 GHZ,8MB, WIN 7 Pro 64 bit,1600x900 HD, Intel HD 4000, NVIDIA Quadro K2000M,16GB RAM, Samsung 250 GB SSD
i have a hp dv5t running windows 7. i already downloaded the plugin (Controlling iTunes with laptop media controls when iTunes is minimized?) and i am running itunes 9, but it doesn't work
View 3 Replies View RelatedBrand new T440p laptop out of the box.
Â
Imaged with preconfigured company Windows 7 x64 image I have used hundreds of times before via MDT. WDS packaged T440p drivers (downloaded from Lenovo website) are injected as part of the MDT installation process.
Â
All windows updates applied (except for the Lenovo PM Device Driver otherwise the thing no longer reboots or shuts down properly anymore) BIOS flashed to latest T440p revision.
Â
Run Lenovo System Update to install hotkey drivers and receive the following:
As you can see Win7 x64... driver says no.
Restarted and tried again... error.
Â
Tried downloading the driver manually from [URL] .... Same error.
Â
Searched for and downloaded version 5.40 .... Same error.
Â
I ran Lenovo System Update 2 days ago on another T440p laptop, may have been a slightly different internal spec... not sure but I'm fairly sure the driver was named differently in System Update. The driver Installed on that machine fine and functions as intended.
Â
The driver could very well could have been updated since then I guess. I do also know this is a newer batch of T440p's as the box configuration that it ships in has changed and looks completely different.
Just picked up a 4420-5910.
Big problems...I want to switch to XP Pro.
Formatting for XP Pro but Snoop mentioned an Acer Downgrade .iso, but it was never mentioned as to what this wa, where to get it, and what it does.
I did a quick format this morning but I could not load the broadcom drivers...got a message :cannot install this...
Now I am trying a COMPLETE format and will see what happens.
I do not have a hard-wire internet connection available where I am, but I have a second laptop whichcan get what I need via wi-fi.
On my 1810TZ I have to use 2 hands to change brightness as FN is on opposite side of the keyboard.
If the right hand CTRL can be used as FN this would be a much better 1 hand action.