I have the Asus PVR and have a bunch of movies in H.264 format. Can anyone tell me if they play well on the 1410. I will buy the 1810T if I have to but the 1410 fits my pocket better and if it does everything I need it to I can live with the minus 2 hours on the battery.
View 8 RepliesI bought the Acer 1410 with the single core SU3500 Core 2 Solo CPU. It looks like Acer decided to release them with the SU2300 now, which is dual core at 1.2GHz (compared with 1.4GHz of SU3500).
Does anyone have any benchmarks comparing the two, and/or if they have a solid understanding how much better it would perform compared with the SU3500? I also see that the single core AS1410 with Celeron M @ 1.3GHz sells at the same price as the dual core.
acer has poster the user guide on line... so its really coming ... here the specs
PlatformIntel® Core™2 Solo processor*Intel® Celeron® mobile processor*Mobile Intel® GS45 Express ChipsetIntel® Wireless WiFi Link 5100*Acer InviLink™ Nplify™ 802.11b/g/Draft-N*Acer InviLink™ 802.11b/g*System memoryDual-Channel SDRAM supportUp to 2 GB of DDR2 667 MHz memory, upgradeable to 4 GB using two soDIMM modulesDisplay16:9 aspect ratio11.6" SD 1024 x 600*11.6" HD 1366 x 768*GraphicsMobile Intel® GS45 Express................
Does anyone know were I can find the dual core version of the 1410? Because all the ones that I find now are ones with the single core 1.3GHz Intel Celeron 743 Processor. I think dual core ones are called su2300s. And how much difference would I notice between the single core and the dual cores because i'm really liking this laptop for college and this is the only thing holding me back to buying it.
View 10 Replies View RelatedUPDATED FOR UBUNTU 10.04 LUCID LYNX
Here it comes, updated guide for Lucid.
Packard Bell / Gateway clones:
This guide has also been tested on a Packard Bell Dot M/U with bios v3303, and it should also work on the Gateway clone. If you have a 1410/1810 and something doesn't work, please report back.
What's working after a standard Ubuntu 10.04 install:GraphicsAudio out, speaker mutes when pluging in headphones. Good volume.Networking, both wireless (intel wifi 1000) and wired (the atheros gigabit)FN +:F4, suspends fineF6, monitor goes blackF7, touchpad on / offF8, muteF9, Bloq NumRePag: HomeAvPag: EndUp: increase volumeDown: decrease volumeRigh: increase brightness: skips steps.Left: decrease brightness: skips steps.J,K,L, etc: numeric keyboard ok.What's not working:Audio in: the integrated mic doesn't work.FN + F5: not recognised, doesn't toogle displaysAutomated Install (recommended): I've done a script that should do it all automatically. In detail:
What the script does:Configure gnome-power-manager backlight dim and hard disk power savingDownload, patch, install and setup acerhdfInstall the power saving scriptInstall the debugging scriptIf laptop-mode-tools is installed, suggest uninstalling and, if you want, uninstallFix the brightness hotkeys issue (jumps 2 levels on every key press)Disable ethernet Wake on Lan (doesn't enable when on AC)Disable uneeded services: cron, anacron and atd (they don't enable when on AC)What the script doesn't:Add the noatime parameter to the ext2/3/4 partitions in fstab. You'll have to do it manually.How it works:In a terminal, run ./InstallAcer_11.6_PowerSaving.sh --help to get a full list of options.If you want to install everything: ./InstallAcer_11.6_PowerSaving.sh --installDisclaimer:This script comes with no warranty. Use it at your own risk. I won't be responsible for any damage this could do to your system or data.Manual Install:
Power saving tips:The Script:By default, an ubuntu install won't take too much care of saving power, which is very important in an ultra mobile laptop. You can easily setup the system to enter some power saving modes, specifically the sata controller and the sound chip......................
I add wwan option gtm 382 mo40x in my acer 1810tz dual core.
I solderin mini-pci-e connector 3.9mm hight and sim slot.
wwan modem is unloced.
Why my acer + gtm382 working only bios v0.3108 not 3113 3115 3117 "not boot, display is boot is nothin and tilt " but 3108 working nice.
I need new bios.
Crack bios? Hack modem firmware?
[url]
Release Notes
Please post your results like this:
-Model(Device/CPU)
-Operating system
-Graphics Drivers
-Browser
-Results
My results:
1810T/su3500
Vista x86
1986
Firefox/IE
Does not work
Update: It works now after applying these useful instructions:
Quote:
Firefox 3.5.5 users have to follow a separate set of instructions:
Before running a YouTube HD clip, please go to Firefox menus and select Tools/Clear Recent History. Ensure the Cookies checkbox is checked, and do the clear. Next, go to Tools/Options/Privacy and select “Never Remember History”.
The above procedure will ensure an HD clip is first loaded in SD mode with 640x horizontal resolution, and then you select the HD button and get GPU- accelerated playback at 1280x HD mode. If you do not first delete Cookies and then turn off history, you may enter an 854x SD horizontal resolution upon starting up an HD clip which is not GPU-accelerated today. If starting in 854x SD mode, when you switch to the HD version, it will still be non-GPU accelerated.
This is the follow-up thread to Phil's great Timeline Tweaks thread.
I've decided to leave out 13"+ timelines for now and focus on the 11.6" models.
3810T, 4810T, 5810T and Travelmate users are welcome to create dedicated tweaks threads.
Some tweaks in this thread work for other timelines too, though.
Software
...Drivers:
......Chipset & SATA
......Graphics:
Update:.................................
I know that the Fn + Brightness key issue on XP has been mentioned in other 1410/1810T threads, but I thought it might be nice to start a thread specific to the problem. After it's fixed we can add it with the other stickies.
I recently installed XP on a coworkers 1810T and because i'm interested in the machine myself i wanted to investigate the brightness issue and see if Acer is working on a fix, or even recognizes the problem.
My correspondence with Acer has been extremely frustrating and disappointing. I was considering using the 1810T laptops to replace our office's aging Lenovos but Acer's lack of support has made me majorly turned me off to that idea.
Here's my discussion with Acer, reverse chronological order (start at the bottom):............................................
Overview:
If you have never heard about Windows tax, Windows refund or anyone ever getting refund for Windows OS then perhaps it is time to look it up.
I don't think many people are aware of the fact that it is possible (and you have the all the rights to) to get a refund for Windows OS if you aren't planning to use it.
Getting Windows OS refund is like returning unused/unneeded product to get your money back. For example, if you are using Linux on your computer, why should you pay for Windows OS? Or, if your study institution provides FREE premium Windows OS, why should you pay for the crippled one that comes with your computer? Why should you even be forced to use Windows?
I decided not to pay for Windows OS. It is in the principle.
Please note: The key in getting Windows OS refund is in DECLINING the EULA agreement the first time computer boots up (or not turning computer on at all). If you accepted the EULA you are out of luck!
Here is how I got Windows OS refund from Acer Canada:
I purchased my Acer Aspire 1410 from Canadian Staples Business Depot. For 5 days I played around with it by booting Ubuntu Linux from SDHC card to make sure it was working correctly, there were no defects, etc, and after making the final decision of keeping the notebook, I picked up the phone and called Acer Technical Support (1-866-706-2237).
After getting a hold for an agent I explained that I would like to get a refund for Windows Vista Home Premium that came pre-installed on my laptop and quoted EULA agreement:
Quote:
By using the software, you accept these terms [of EULA agreement]. If you do not accept them, do not use the software. Instead, contact the manufacturer or installer to determine their return policy for a refund or credit...................
I took an MSI Wind U100 webcam, it has the classic USB connection you expect for! The connector is at right instead at left like the original one.
You need:
-A WindU100 Webcam (1,3 Megapixel, a very good framerate),
-Dremel
-Some wire
-A decent soldering skill
-A lot of patience, and much more crazyness.
I don't want to post a Tut how to do it, you need only to know that pinout is the same and the colours are the same.
11 Black 3.3V
22 Purple D+
33 Red D-
44 Orange GND
Don't care about the fifth (GND too).
You need four wires to move the connection from the right to the left,and some dremel to leave out some "plastic keys" about the old one. Newer is a little thicker that the old one, so dremel the plastic at back of the webcam too.
The WindU100 Webcam has a led to show when it's used, so if you want you can do a hole to see it in the Acer. I didn't: the plastic is white so i see it too...!
A good idea is to change the whole cable if you have the MSI original one, but i didn't dismantle all....
It sure does look like that Clevo 18in revealed sometime ago.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didn’t touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
It sure does look like that Clevo 18in revealed sometime ago. This is not an OCZ Whitebook rebrand.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didn’t touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
Planing on upgrading my Aspire 5100 with a dualcore cpu,is there anyway of using both cores on software that is not specially written for it?
Does the ZM-85: 2300 MHz work to? It says S1 sockel.
I've read many articles and post regarding Acer timelines with the SU2700, and i'm confused as many seem to refrence it as single core but on intels on website its listed as a dual core!
[url]
Any one who has this CPU can confirm this?
is acer aspire 5315 intel celeron processor 550 a dual core? if not how do i upgrade it myself?
View 9 Replies View RelatedI have a Travelmate 4654 LMi and it's about 2 years old. I would like to know if it's possible to upgrade it to a Dual Core processor? I don't know if there is a model of Dual Core processor out there that would fit with the same socket pins? And even if there i one, will I have other things to change, like in the bios etc...
View 6 Replies View RelatedI'm having a bit of trouble finding out this information. Does anyone know if there is a release date yet on when Acer will be offering the su9400 in either the 4810 or 5810 timeline series?
View 5 Replies View RelatedIt's listed as (Two cores) in DXDiag and shows up as two separate processors under Device Manager.
View 4 Replies View Relatedi have an Acer aspire 5100 with dual core 1.6 cpu (laptop not working) and an Acer aspire 5100 single core 2.0ghz cpu (working), the question is can i put the dual core straight into the single core without any problems also would it be worth doing it?
View 7 Replies View RelatedThe Acer Timeline 3810tz is advertised to get 8+ hours of battery life. Those who have tested get about that amount while browsing the web and doing simple task, and this model contains a single core processor. I read somewhere that the Acer 3810 model with a dual core processor SU4100 get half that battery life and only goes about 4 hours.
View 5 Replies View Relatedi want to buy a HD PVR but my laptop doesnt meet the system requirements needed, all i want to do is record it on my laptop and than transfer the files to my desktop pc so no editing or any other software will be needed on my laptop
heres the laptop i own
[url] (it sais SP2 on it but im going to install SP3 which is needed for the HD PVR to work aswell)
and heres the HD PVR system requirements
Hauppauge Computer Works Ltd : HD PVR
I recently did a clean install of Windows XP Pro on my M90. This is the first dual core I've owned.
After installing all necessary drivers and Microsoft updates, I am very disappointed with the overall performance.
Is there something unique with dual core processors that I am unaware of? Let me give one example. No matter how many times I run disk defragmenter, my hard drive is still around 40% fragmented.
I've seen a number of rescent posts where folks are still setting up RAID platforms even though dual core and now quad core processors are becoming mainstream.Is it the additional chipset that you demand or what is it that requires the additional hp you seek? there is no game out there I cannot play without it and short of CAD I see little use other than proffesional requirements (NIMBUS 2.1 or Zach, perhaps).
View 14 Replies View RelatedCan this be done without a new motherboard or special heatsink? I originally wanted to do with the an HP 8530w but as the dual-core mobo is not compatible with the quad mobo it's no longer an option for me. Is the m4400 constructed in a similar fashion? or did Dell opt for a universal mobo?
View 10 Replies View RelatedSince she only uses it for office, mail, web browsing and some music with Media player or iTunes, I know the integrated Intel GMA4300 will suffice.
However, I'm not sure about the processor. There are three options, a celeron dual core (which is really low-end, so out of the question), a 2.1 Ghz pentium dual-core (T4300) with 1Mb of cache and a 2.2 ghz core2duo (T6600) with 2Mb of Cache. They all have 4Gb of RAM.
Both the pentium dual core and the core2duo come with Windows 7 Home Premium (64bit) so I expect even the dual core can't be that ancient as far as architecture is concerned .....
I'm shopping for a new laptop to replace a damaged Dell Inspiron 1300. All I would be using the computer for is web surfing, sending and receiving emails and some Quicken. I'm not a gamer nor am I into digital photography. One thing I do know is since the new computer's OS will be some form of Vista I need to make sure that it has at least 2GB of memory, that part I'm certain of based upon so many comments I've read about memory capacity and Vista.
I'm looking at a Dell Inspiron 1525 to replace my 2 year old Inspiron 1300. Dell offers a Celeron processor as the entry level processor on the 1525 and from there you can choose a dual core processor and then several core 2 duo processors. For basic computing needs on a computer having Vista with 2GB of memory would a Celeron processor be enough of a processor for me or should I spend an extra $50.00 USD for the entry level Dual Core processor offered by Dell?
I have an HP G60 that I was interested in possibly overclocking it. It has an AMD Turion Dual-Core RM-70 2.00GHz Processor in it. I was wondering if it is even possible to overclock it and if so how much would be a safe bet?
Heres some specs:
Model: Hewlett-Packard G60 Notebook
Processor: AMD Turion Dual-Core RM-70 2.00GHz 64-bit
RAM: 3.00 GB DDR2
OS: Windows Vista Home Premium 32-bit SP1
HDD: 150 GB SATA
Graphics: NVIDIA GeForce 8200M G
Surprised to see the pricing of Studio 1558.
i do not understand why dual core i5 processor studio is costlier than quad core i7 studio ?
I bought the i7-3520M (dual) and I looked in the manual to see what slots to use for my memory upgrade and the instructions were completely off (where the dummy stick is supposed to be and where it actually was).
Â
I purchased two 8GB (Kingston) sticks to replace the 4GB that came installed. I took out the original 4GB under the keyboard and replaced it with the new 8GB Kingston. Everything worked great and I've been using it that way for about a week.
Â
Tonight I decided to go ahead and install the other 8GB. I assumed it would go in the bottom slot where there's a dummy stick. I pulled out the dummy and placed my 8GB there. Turned the laptop on and... nothing. It wouldn't power on at all. I took my 8GB out and put the dummy back and it worked fine. Just to make sure I didn't get a bad stick, I replaced the one under the keyboard with my other 8GB and it worked fine there. My question is where is my second 8GB supposed to be installed and does that one dummy stick always stay where it is? It does have a "do not remove" graphic on it, but I thought it was only because the laptop came with one stick and if you were putting two in you would replace it.