I upgraded my RAM to 4gb and installed Vista x64 Home Premium. the system was only showing 3gb on start up so I updated BIOS to 3.50 via DOS as it can not be done inside Vista x64.
Bios update completed and notebook shutdown.
Now no power in notebook.
No lights on when connected via Power adapter or battery.
system will not turn on.
Downloaded and tried the crisis disk to reset the BIOS and still nothing.
I upgraded to 4 gb and the Bios was only showing 3gb/Vista 4gb.
I updated the BIOS via bootable DOS Fdd after reading things here and knowning that it was not possible via x64 Vista.
Update finished and notebook shutdown, not restart.
Now it will not turn on.
No lights with power adapter or battery.
I have tried the "crisis" disk method. holding fn+esc.
Tried power in and holding Insert.
I've tried with and with out battery/power adapter.
Opened and bridged the clear-cmos for 30 seconds.
Reseated RAM and CPU.
Tried all of this with 1gb, 2gb 3gb and 4gb.
but alas she is still in a coma.......
I have tried Acer support for help but they want it sent to them, I want to avoid this if I can.
Can a failed BIOS really kill a notebook?
I have an Acer Aspire 5100
AMD Turion 64x2 Mobile Technology TL-56, 1.8 GHZ
Radeon Xpress 1100 hyperMemory
1 GB DDr2
It has vista home premium preinstalled. Lately I installed Xp on it (Ive done it many times before because its faster) The only thing is that with Xp it shutsdown after some time, 'cuase of the heat. So I thought I'll update the BIOS. It went well but then IT shutsdown! I was afraid of this but it happened. Now my Lap won't boot, nothing comes up, not even a sound! The only thing that work is the dvd driver. The fan goes like it would boot but nothing. I tried to flash it via usb but didn't read the usb.
Im using Acer Aspire 4520. Now my laptop have dead because im update the BIOS firmware on windows vista platform. On 8% progress its 'hang' now i'm can using my laptop.
the many solution i have try on this forum. not done.
FYI on my procedure
1- Run the Phoenix Crisis Disk -> Format the floppy procedure.
2- Open the Acer BIOS from website -> I get the Z03_3626.wph file then rename to bios.wph
3- Copy the bios.wph to Floppy drive
4- Insert the USB floppy to my laptop then remove the battery, hold the FN + ESC button, plug in power then press power button
5- I hear the floppy drive reading on 3minutes then after 3minutes the floopy drive stop and i release the holding FN + ESC button
6- waiting about 20 minutes nothing happen.
so what i want to do...? i think this is right procedure because it reading the floopy drive long about 3minutes. If i try burn the CD procedure nothing happen (can read), then try rename to .fd it not read.
Hp update popped up on my DV5t-1000 and asked me if I want to update the bios version. I downloaded it, but while the installation an error occurred and it dumped all the memory to the hard drive. After a restart, it does not even show the hp logo only a black screen. All the led lights are on not blinking.
View 10 Replies View RelatedI have an HP Pavilion dv6700
P/N: FK125EA#B1A
Service Tag: dv6880evÂ
BTW I downloaded the bios of dv6880ev. Why the heck is the laptop model dv6700 and service tag is dv6880ev?!!?!
I start the laptop up and it freezes at the HP logo screen. Only the ESC key works (Press <ESC> to enable startup message) if i press it fast enough and if i push the F10(BIOS SETUP) key it just hangs at "Please Wait"
Laptop Drivers Link
How it started: I updated the bios of my Laptop from Version F.57 to F.58(Latest). After the laptop shutdown, I immediatly turned it back on. Maybe its because i didn't give it a few seconds to power on by itself?
What I already tried:
-Removing CMOS, ram, HDD wait half an hour and power on again.
-This guide which does not work because HDD is formatted: Recovering the notebook BIOS using a key press combination
-The Phoenix tool procedure found here
How to use the HP BIOS update (uefi) utility
What I want to try but don't know how!
-Creating a new partition on the hard disk(HP_TOOLS) to trick the system that I have the old BIOS and maybe recover using the WIN+B combination?
I was performing a BIOS update on Dell Inspiron N5110 to Latest bios version,  when the laptop became inactive plus the fan started to run at full speed. i could not even switch off the machine by pressing the power button. At the end i had to pull out AC cord and battery.Now its dead(No activity at all). how can i restore bios???
View 9 Replies View RelatedI have an Inspiron 17R SE 7720 running Windows 7 64-bit Pro which has been working fine, but I was thinking about getting an mSata flash drive to cache the hard disk, and reading on this forum discovered that my A01 bios version wasn't up to the job, so tried to update the bios tonight.
I downloaded the 7720A12.exe from the Dell site but wanted to backup my bios first. Again searching this forum, I saw a post that said there was a backup option when running the exe. Wrong.
Running it from within windows it immediately said it was going to reboot (I wasn't given an option!). My laptop powered down as if doing a restart, but immediately hung.Â
There was nothing but blackness on the screen, no text, no beeps. It appeared to be stuck in a boot cycle, as the screen back light was coming on, and off, and on, and off etc, for 10 minutes straight.Â
I powered down and powered up and I get the dell logo and can enter the bios setup, but after that, no matter what I do, I get a dos based "BOOT MENU" with just these options on:
Network Boot <- does nothing except messes up the display of this menu Setup <- loads the bios settings Diagnostics <- runs a diagnostic program which tests the hardware and reports all tests pass Change boot mode setting <- does nothing except messes up the display of this menu
I can't get passed this menu.
I've tried booting from a DVD - both a Windows 7 installation disk, and the Dell recovery DVD I created when I first got the laptop, neither DVD boots, and apart from buzzing the DVD drive, don't have any effect at all.Â
Both disks have been tested in another Inspiron laptop I have, and I also set the boot priority order in the bios so that DVD is the first item in the list.
I've also tried a bootable USB stick, but no joy there either. The light on the stick shows it's being accessed, but I still end up at the Boot Menu above.
I have a dv7-3021ea that will not switch on after an hp update for the BIOS applied and failed.
Â
When powered on, there is the two blinks from LEDs indicating BIOS corruption.
Â
I have tried the WIN-B BIOS recovery but the laptop has a quick think, then powers off and reboots to two blinks so I assume the HP_TOOLS partition is not working.
Â
I have downloaded the BIOS updates from hp support, both f.13 and f.12 versions but when I attempt to run these on another computer (to try and create a BIOS USB stick), I get the error "InsydeFlash can not load the driver. Please close all applications. If you are running this utility in Windows 7, please run as an administrator". I have closed all apps, am using Win7 and have run as admin, is this because the computer I am running on is not a dv7-3021ea? If so, how do I proceed to create the USB recovery media?
My dell ispirion n5110 doesn't restart after bios update while updating bios my laptop freeze and show nothing only power lamp is onÂ
View 1 Replies View RelatedAfter the latest system update from Lenovo System update, my laptop T530 doesn't do a successful cold boot. A warm successive boot (with interruptible boot screen) works fine.
Â
But cold boot always fails and the system powers down in less than 5s. This is seen after the BIOS updated to 2.59.1.12. restore to older version of BIOS(downgrade it)?
I have an acer aspire 5630 with a geforce 7300 go.
I am suppose to have 1024mo RAM but it only shows physical memory 766 everywhere.
In bios, extended sharing is set to 766...and i can't change it, it's in blue.
My video memory is 128.
Is there a way i can change the sharing memory?... so i know if my ram is broken? It still under warranty for a month.
Also, my fan does a huge noise ... but only when i start it.
When a play games like cod4... it's heating but everything is fine, any isues? maybe a bearing? Should I change my fan? cleaning it up does nothing.
I have an acer aspire 1652WLMi
I updated my bios with the file, but The laptop is dead. The screen is always black when I turn the laptop on.
I followed the direction on one of the threads but still nothing.
I'm sorta afraid to update my BIOS since i'm planning on getting a Core 2 duo sometime. Acer Aspire 5135, and im trying to update to 1.33....what are the risks exactly? Or am i being paranoid...
View 6 Replies View Relatedim trying to update my BIOS on my 8930G from 1.10 to 1.13 (or maybe even 1.14). Im only doing this as id like to enable VT but the only info i can find is related to 1.13.
Now ive downloaded the BIOS package from Acer and have tried to run the Insyde flash utility (x64 on Win7) but it wont install. After a few seconds it comes up with;
'BIOS not for your notebook'
In the Insyde application window i can can see the following info;
Current BIOS ID - 8930 & Version V1.13
New BIOS ID - KM2/TT2 & Version V1.14
Does anyone know if there is a motherboard bios update for the 5920G? Is there anything for the 8600M? Any info would be a great help. Mine is a US model, purchased at Best Buy. Has the T5250 @ 1.5. Is there a way to upgrade the wifi from a/b/g to one with n?
View 6 Replies View RelatedWill the latest Vista BIOS V1.24 allow the 9410 to boot with 4GB of RAM?
Think I'm running the original V1.16 BIOS with one 2GB stick and one .5GB stick.
I'd like to run two 2GB sticks. When I try, it won't boot.
I want to flash the newest bios to my 5920G, but I don't know how to: the zipped folder has two different .exe files and one .sys, and I don't know which to double click to initiate the process...
View 5 Replies View RelatedI have Acer Aspire 5315 and was running Bios v1.33. It has been running warm for sometime and thought an updated BIOS would help.
I tried the ACER site but didn't see any BIOS updates listed for XP. I have XP Pro on it now.
I followed a different link and found BIOS 1.45 so i Flashed it using WinFlash.
After it completed it shut down, i waited a couple of min. and powered back up, when i did i saw the BSOD for about 2 seconds and then goes to selective startup (Normal, Safe, Safe w/networking etc...)
I have not tried safe mode yet but in normal it just goes back to that screen again.
I saw the thread on using the FN+ESC mode but not sure if i really need to do that.
what I should do to restore it back to 1.33? I have to check my external HD but i think i still have that 1.33 version saved that i used when i did it the first time.
I have an HP Pavilion g6. IÂ can't update to windows 8.1 after download it by windows store, it reboot pc and after that give me this error:Â 0xC1900101 - 0x20020017.Â
View 2 Replies View RelatedI have tried the 1.35, the 1.32, 1.31, and 1.29 bios for the 5620 and all of them keep coming up as 'open flash.sys fail'.
View 10 Replies View RelatedI am looking for the following bios:
Acer Aspire 5310, Intel 27A0 rev 3, 2008-12-08, v1.50
Do you have any idea where to get this, who to ask? Acer does not list it, does not respond properly and I could not find anything in the forum here.
I have been having some performance issues with some of my games. I tried to fix it with no success. I figured I should update my BIOS, which I haven`t since I bought my laptop.
I downloaded the BIOS update (3238) from the Acer website. I clicked on the application and it brought me to WinPlash64. It automatically started the bios update, but it got stuck on “Flash New BIOS”. I had to shutdown my laptop since the BIOS did not update.
how to flash my BIOS properly or tell me what I`m doing wrong?
I am using a BIOS version since 02/02/2007 (of Phoenix). Before installing a Core 2 Duo CPU, do I have to update BIOS?
I have a notebook with a Core Duo 1.73 Ghz, chipset 945gm (heard from other member that it has Napa Platform).
I have no issues whatsoever with this laptop, but just saw that there is a newer version of the BIOS available from Acer. Should this be updated? What precautions should I take before doing so?
View 4 Replies View RelatedI have an Aspire 7720z. As Vista was having so many glitches, I set up a dual boot system with XP and Ubuntu 8.10 on two partitions on the same drive. Last week I upgraded Ubuntu to 9.10 but started having power problems. I read somewhere that a BIOS update would help so I flashed to v1.45. Everything is now going great with my Ubuntu OS. The problem lies in Windows. When I try to boot to XP the splash screen comes up for a couple of seconds and the the computer reboots. I used a test disk to check the drive and everything is fine. I then tried to repair the XP installation with the install disk but was told that it couldn't find an XP installation. So, for the umteenth time, I tried to re-install XP but was told that the installer couldn't locate any devices to install onto. Completely bewildering as my Ubuntu installation works perfectly.
View 5 Replies View Relatedhow to flash the bios of a Acer Aspire 6530 without being in windows.
I download the bios update and opened to see how it worked and then accidently shut the zip file that it was in and it crashed, computer froze and now it wont work!
It load the boot screen and even windows but crashes after mup.sys and brings up an error screen about problems with computer and shuts down. I have tried reinstalling windows but when i get to the hard drive section the hard drive is not there although its there in the boot screen.
I have tried re installing the bios with the phoenix recovery tool but that didnt work.
Im guessing i need the Insydeflash tool and some special file name for the bios.
I tried winflash to update my bios but it killed my motherboard, what did I do wrong.
I now have another 7720G with bios version 1.40.
How do I update the bios without killing my motherboard again.
Obviously I am reluctant to do it, but I would really like to have the machine running properly.
My Acer Aspire 5517 Laptop is running Windows 7 X 64 with an AMD Athlon TF-20 Processor at 1.6Ghz with 2GB of physical memory. Every once in a while, and lately quit frequently, my screen goes black, and it will not boot...I have attached an exterior Monitor to it, with no success, so I assume it is not the video portion. To get it to boot I turn it off and on until it re-boots. Sometimes it reboots quickly and at other times it takes several minutes...up to 20 or 30 sometimes. I have run a disc check to see if all the  sectors are good on the hard drive. It checks out okay..I thought if the BIOS was out of date, I would update it, to  see if that work....
View 2 Replies View RelatedToday I updated two Lenovo drivers (ACPI and Sound). After the installation I was asked to restart my Laptop. The restart did not finish and the system showed the bluescreen for a short time and the it restarted with the system recovery. All attempts to repair the system with Windows recovery were not successfull. I am still not able to start my Laptop.
My system is:
Lenovo Thinkpad T530 (2429DT7)
Windows 7 (64Bit)
Â
What can I do to rescue my system?