Acer :: 6920G Motherboard
May 28, 2010where I can obtain a new or reburbish working motherboard for my Acer 6920g.
View 5 Replieswhere I can obtain a new or reburbish working motherboard for my Acer 6920g.
View 5 RepliesMy 6920G went down a few days ago, I sent it to local computer store to have it diagnosed. It turned out that they say it is a mobo issue and said that it would cost aroun 400 to get a new mobo + labour fee.
I don't have any warranty on theis laptop, and the 1 year warranty by the manufacturer has expired. I am just wondering if I can order the mobo fron Acer and maybe replace it on my own.... I don't know which would be better, to have the guys at the store do it for me or phone Acer....
One of my mates has a dead M1330. I told him about the "oven" trick but his wife might hurt the both of us. It is however possible to replace the motherboard with the integrated X3100 motherboard correct?
View 10 Replies View RelatedI have xps gen 2 with a faulty video card and i was wondring if its possible to replace the motherboard with M1710 motherboard so i can fit my 7900 gs video card in it and put all the other hardware parts for the xps gen2 motherboard to the M1710 motherboard in the XPS Gen2 palmrest ... so can u please give me some hints if its possible to do it or not,so basiclly its replacing a motherboard and putting all the old part in the new 1 ..
View 14 Replies View Relatedi have had my 5672 for about three years now. I am a computer tech and i take it on the road with me to solve problems every day.
well the other day i was doing a data transfer on my laptop via an external hdd when all hell broke loose.
now when it boots up it just stays on the splash screen and never goes into windows. its not frozen it just dosent boot. when i try a new hard drive it wont load it just stops on windows the is starting screen.
i have run every test in the book. i have tested the ram with memtest86 no problems. i have run numerous thest and they all say every thing is ok.
so either i blew out a usb port that fried some part of the motherboard or the hdd controller is fried.
has anybody else seen this issue?
and where can i find a new motherboard online?
if there was a place I could get the motherboard for ACER Acpire 5024. The board is made by BOLSENA?
Here is a photo:
I have bought a 500gb SATA HDD to replace the stock 250gb one.
I would install the drivers from the website but for some reason they don't seem to detect the webcam etc. I also can not find the link for the bluray player.
Is there a version of the original restore image on the interwebs anywhere
I have noticed my 6920g's fan to go annoying loud when playing Warcraft, which indeed is a pretty graphic instensive game depending where you are in WoW.
My question is to anyone else who owns a 6920g and plays WoW, do you have the same fan problems as me? Sure I understand it isnt going to be silent but recently it has seemed to get worse and it's really doing my nut in.
Comments and thoughts, obviously welcome.
I tried doing a search for similar problems but I kept getting a black screen for some reason.
I've just bought the wife a new laptop and it's a 6920g (same as mine lol) with exactly the same spec as mine! but what im wondering is, would it be posible to somehow make a mirror image of my hd and transfer it to her new one? im thinking of using e recovery manager and send her com my user created back up image and then restore it on her side, but im not sure if this would work.
View 4 Replies View RelatedRight after Vista got a virus and gave up on me i took the plunge and installed xp little did i know how much of a nightmare it was going to be. i know there are a few more threads like this but my acer has the hd 3650 and i cant find the drivers anywhere people direct me to a page on the ati website but when i download them it says you do not have the proper hardware for these drivers to be installed . In device manager Display adapters isnt even listed.I stil have ? By network controller uknown device usb device and video controller (vga Compatible)
View 5 Replies View RelatedI've acquired my daughters old acer extensa 5620 but the motherboard is apparently kaput. I can't find a replacement anywhere, so, does know anyone of a different model that will fit this chassis?
View 6 Replies View RelatedI have an Acer Aspire 5715Z notebook and I would like to change my motherboard to a more powerful one which has a normal graphics card, not an integrated one.
The motherboard of the 5720G is compatible with this model? If not, which one?
Another question:
Can this series of Acer notebooks use 800MHz DDR2 rams? Or up to just 667MHz?
I noticed that if I have to shut it down by turning the power off directly from the power switch (without shutting down Vista first), some problems arise.
The next time you try to boot the laptop after doing an "emergency shut down" like that, the laptop starts making a very loud beeping noise and it's very hard to boot it (eventually it will boot, though). My friend said he doesn't have problems like this even if he has to turn off the power by pressing the power button for 4 secs.
Is the motherboard broken?
it boots to the acer start screen where you can press F2 to get in to bios but nothing happens when I press F2 and it justs goes to this screen:
And this text is on for like 3 secs then goes away then comes back for 3 secs and so on.
If I put in the acer recovery cd it loads the image file, then theres just a green background with a mouse pointer and the mouse is not functional..
Doesent sound good, right?
there is no HDD in it.
Im having some problem in Aspire 5570ANWMi.
Solo Core T1350 with 2.5GB ram & 80GB HD.
Ive just upgrade my RAM 1GB to 2.5GB a week before. after few days of usage my laptop keyboard not working and the network green LED is keeps ON even disconnect. How can i fix my motherboard prob?
Ive already test my keyboard by switching frm another lappy. but no use.
I have a 6920G with 4Gb of RAM, a C2D T9300 and the Geforce 9500GS running Vista 64-bit.
For some reason I'm only getting 3DMark03 scores around 5200-5300 but I've seen benchmarks of identical systems much much higher.
dfegtersgft
Why is this?
My brother-in-law has a 6920 with a gig less RAM, a lesser C2D T5700 but a Radeon HD3650 and his 3DMark03 score is 10500.
Should my 9500GS really suck so much ?
Any 6920G owner have their hard drive access light stuck on "on" for about 30 seconds or so and have their laptops freeze for this duration? Freeze as in as soon as I click any window, it turns white. This happens every now and then, doesn't matter what I'm doing.
View 10 Replies View RelatedMy 6920G shut it'sself off, and now it won't turn on. When I press the power button, it flashes on then off. It does this repeatedly if I hold it down.
What's wrong? is there a lock on it or something?
I've found most of the drivers for xp64bit but i read that tuba speaker doesn't work well (even if you install the corrent drivers from acer) and that's very dissapointing...
View 10 Replies View RelatedSome of us know that the 6929g sometimes mostly during gaming downclocks....
But can anybody explain to me, why i can get the following temps (tested separately)
cpu, max before downclocking:
realtemp: 91°
hw monitor: 76°
gpu, stock powermizer on
gpu-z 73° (stopped myself still no downclocking)
But then when i start playing cod5 my cpu starts downclocking @ 58° (hw monitor), while GPU @ 63°....
Why does this only happen while gaming when it seems that both cpu and gpu can handle much higher temps?
Combined it should reach even higher temps but it doesn't because it downclocks?
Is there something else that can force the cpu to downclock?
I've got the acer aspire 6920G, and when i play world of warcraft my fps drops to 7 in 25man raids. I play with really low options.
I've always had low fps, i tried installing windows Xp, vista and now windows 7 and nothing helps.
Now i must say, win7 had the best result. My fps increased in major cities, but in raids it's still the same thing.
I defragged my HD, I use a 64bit to use my full ram, I run no background programs, all options are on low, and i still get 7fps.
I'm brand new to laptops and just bought an Acer Inspire 6920G and love it!
The only problem is that it came with Vista and keeps giving me problems. So i got out my windows xp cd and tried to reformat it. But after i select to install XP, i get a screen saying that it was unable to find a hard disc and that i might need to run a setup or diagnostic. My computer shows an ACER(C) drive and then a DATA(D) drive, but my windows xp doesn't see it
I have a 69dsfds20G with 4Gb of RAM, a C2D T9300 and the Geforce 9500GS running Vista 64-bit.
sdfdsfdf
For some reason I'm only getting 3DMark03 scores around 5200-5300 but I've seen benchmarks of identical systems much much higher.
hacked by pca
Why is this?
My brother-in-law has a 6920 with a gig less RAM, a lesser C2D T5700 but a Radeon HD3650 and his 3DMark03 score is 10500.
i've just got an Acer Aspire 6920G and i have a question about the RAM.
The sticker on the palmrest says it has 4GB of DDR3 RAM, as does the box. But the system information on the computer says 3GB, CPUz says it has 4GB.
I've opened it up and there are definitely 2 sticks of 2GB DDR3 RAM, so why does the Windows system info say it only has 3GB?
if anybody has a older version of the bios for Acer aspire 6920G, please send it to tbulls@gmail.com, thanks so much.
I've refreshed my bios to 1.07 and I have tried 1.06 and 1.10.
I am not sure if they are official release version, but since I've refreshed my bios with these versions, my computer fails.
In the past, I could use recovery DVD to restore my system, and audio drive work fine, very high quality. Now it's gone, even I use recovery DVD, my audio drive does not works fine.
It sounds like a realtek HD public drive (low sound quality), and I cannot use plug-in microphone when 5.1 Dolby effect opened.
No matter what I do it will not take a microphone. The mic is working, I plugged it into an amp. It can't be the connector as I just got a new one today and tried it on the Aux input of a headphone amp.
This is absolutely ridiculous. I remember having this trouble before. I can't even seen to access "line in" as an option when recording anymore either. What's going on? I need to record some stuff and I can't use the crappy in built mic for that.
I've been playing some games fine, e.g. pro evo 2009, in fact I played a whole season with no problems.
Today when I turned on my comp and tried to play it got stuck, and then when i restart it's all really really slow (unplayable)
My other games have got all slow as well
Is there anyway to see if the graphics card is working properly?
I made a purchase to upgrade my cpu to a T9300, today I decided to attempt to upgrade my gpu as I found this on ebay [url] (9600m gt for £109), by the way I am aware of the bios isue and needing a hdmi connection to begin with! but now I thought that seen as I done all this allready that I mayaswell make it a clean sweep and go for a faster hdd whille I'm at it
But what I would like to know is, would I be able to install a new coppy of vista on to my new hdd then install empowering technology and then use the back up image that I have allready created on my external hdd so that I would'nt have to mess around with installing every single one of my programs, apps and games again? as it litteraly takes me about 2-3 days to get it the way I want it (recently took it back tio factory default btw and it was a nightmare lol), or is there a better way to go around it?
I've had the Acer 6920G for quite some time, I realized I should put a stop to throttling/downclocking.
I tried the several ways which came from this site, especially from flipfire and DarkSilver. I already undervolted my cpu, but after I played L4D2 for about 10 mins it started to throttle again. And the post which DarkSilver made was to go to regedit and change some settings in the RightMark CPU Utility, I've done that yet it still throttled.
I also attempted to go to BIOS and check if I could disable EIST, but there was no option. Does anyone have any idea how to solve this? I've updated my drivers and everything, and I also upgraded to Windwos 7 - but it still stays the same way.
decided to try out undervolting to solve what i suspect are cpu overheating issues which causes the gpu to downclock when playing games... i know others have done the same.. question is, how far below the default voltage have you guys gone? the default for the 12x multiplier is 1.1365v and right now im testing 1.0125v... i think ive undervolted a considerable amount already but have only gotten 1 or 2 degrees off my max cpu temp... also, do i have to undervolt all the multipliers? or is it ok to have my 12x multiplier at a lower voltage than the other multipliers? i dont really have the time to find the right voltage for all the multipliers
View 10 Replies View Related