I noticed that if I have to shut it down by turning the power off directly from the power switch (without shutting down Vista first), some problems arise.
The next time you try to boot the laptop after doing an "emergency shut down" like that, the laptop starts making a very loud beeping noise and it's very hard to boot it (eventually it will boot, though). My friend said he doesn't have problems like this even if he has to turn off the power by pressing the power button for 4 secs.
I got an Acer Extensa 5420 a few months ago refurbished and at first everything seemed fine. A month or so later I noticed that the line out had a small crack in the middle of the green ring.. a little annoying but my headphones seemed to work fine so I just ignored it. After using the line out for a few months it's become more and more faulty. Now, when I plug in headphones no sound comes out, it doesn't even recognize anything is plugged in unless I have it turned at the exact right angle. I know the audio jack is just screwed up, but what options do I have to fix this problem?
I have a DV9000, 17inch. A number (that I think is significant) 439112-001 is on the bottom of the laptop.
I need to buy a refurbished/spare part motherboard to replace the one that died in my other computer, but I can't figure out which one to buy. At first I thought it was as simple as buying a used DV9000 laptop or motherboard, but apparently not only does the screen size (13 vs 19 inch) matter, but also a number.
I see numbers on ebay with stuff like "447983-001"--that's why I thought that one number on the bottom of mine was important. But I can't find that number on any motherboard on ebay, and it only turns up 300 pages on google, which leads me to believe it isn't the right number.
One of my mates has a dead M1330. I told him about the "oven" trick but his wife might hurt the both of us. It is however possible to replace the motherboard with the integrated X3100 motherboard correct?
I have xps gen 2 with a faulty video card and i was wondring if its possible to replace the motherboard with M1710 motherboard so i can fit my 7900 gs video card in it and put all the other hardware parts for the xps gen2 motherboard to the M1710 motherboard in the XPS Gen2 palmrest ... so can u please give me some hints if its possible to do it or not,so basiclly its replacing a motherboard and putting all the old part in the new 1 ..
Has anyone broken the power jacks on their aspire ones? I saw from some pics that it's soldered right onto the board. My wife tripped over mine yesterday and may think the plug is a little bit looser than before, but still holds just fine.
I have a 4 month old Acer Aspire 6920G laptop with a cracked LCD. It happened just by catching the corner of it (the plastic surround, not the lcd) with the back of my hand (it was just a tap for god's sake!) as I went to plug in a memory stick. Brilliant. I guess the screen was weakened for some reason.
Anyway, I know the screen isn't covered by the warranty so I was wondering how much Acer charge to replace the screen? I've looked around and can get a new replacement screen for about £95 and fit it myself but I assume that will void the rest of my warranty? I'm happy to go the DIY route if a screen is far more expensive from Acer.
I have an Acer Aspire 5720 series with a seagate momentus (5400.3 120GB).
I am pretty sure the HDD is stuffed. The notebook tries to start and gives me different error messages each time basically to contact the hardware manufacturer. The HDD also seems to make a click or clunk noice every so often as if it is having trouble reading.
Anyway main question. If I replace the HDD how do I get this notebook working again... no recovery CD's or anything?
I have an Aspire 7738G and I have a few questions.
My subwoofer seems to be broken, sometimes it sounds as it should but sometimes it sounds like a broken speaker. Have anyone else experienced this? Is there a easy fix or do I need to hand it in for repair?
When it was new 2 months ago I began with creating two partitions on the windows drive (it has 2 harddrives) because I don't like it when the windows partition is on 500 gb, then everything got screwed and nothing worked (I so hate the MS partitioning tool).
Because of this I lost the backup partition and the genuin OS. I have ordered the windows seven upgrade but I wonder, can I do a clean install without having a genuin os on the pc, with the upgrade kit?
Is there anyway I get a new backup partition?
I do have a serial on the back of the laptop for vista, is there anywhere I can get the oem dvd for vista for this laptop and install it with my serial?
Right now I have windows 7 RC and the volume touch slider does not work. I can't find any drivers for it on the acer driver site. IS it broken or what is wrong?
I'm using an Acer TravelMate 7520. I had it with me at university, and had no problems (other than it being a little slow sometimes...). When I came home for the summer it started freezing up, and then emitting a loud, constant beep. it will work fine for a few minutes upon start, but then the programs start to freeze, then the mouse, then the beep comes. I did a virus scan and came up with 2 viruses, which i removed, but it is still doing it!! I can't figure out what is wrong with it, or a solution.
The other day it got very hot, because me (like an idiot) left it sitting on my bed with the fan covered. It cooled off and everything, and the fan works fine.
My touchpad broke days after I got the laptop, I go to Acers site for drivers and then when I download them I get told they have errors. I cant click or scroll with the buttins either, it is utterly useless and I am having to use a terrible USB ball mouse.
I just installed XP Pro on my Acer Extensa 4630Z and I installed all the drivers successfully but the wireless driver. I tried all the drivers from acer's support site [url] none of them work. I also tried what worked for Davoucci with same laptop but this driver also doesn't work for me
I installed Windows XP SP 2 without SATA and everything was running perfectly exept i was getting BSOD from time to time . Recently (one month ago) i installed Windows 7 .
Performance in ordinary work and in programs is now excellent but...... There is another side of the medal. PC games . When i intsalled ACER graphicks drivers i runned my games with stuttering . Also with ATI drivers(9.12) modded by Mobility driver threre is no stuttering but i can play only in low resoluitions like 800 600, 640 480 etc. What is the problem ? I really dont like XP and i like Windows 7.
Ever since I bought this laptop I've had an issue of it shutting itself down. Almost always while watching youtube videos. I found out about the handy little tool called coretemp and I see my processors running about 68+ nearly all the time. When I have websites loaded that have flash animations, ads, videos (youtube), it only gets hotter and hotter. It nearly always reaches 90+ (Celsius) and then shuts down.
I read about it needing a bios update for many people who say they have the problem with the laptop screen going black, but I think mine is heat related.
My laptop runs around 68 when idle and when busy it gets hot. Right now I have Google Chrome open with two tabs, one is this webpage and the other is gmail and its running at 75 celsius. Performance tab in task manager says it has a processor load of only 1%.
I keep a watch on the temperature and as long as I start closing programs and windows when it reaches around 80 it will start to cool down. So as long as I can keep an eye on it the laptop will run fine for days with no problems. If I forget to check and it gets too hot it'll shut down. I'll check the logs and sure enough the last few lines of the last log file will look something like this ...
Why does the fan run so damn much? I know that the bottom of the laptop does not get hot like Compaq and Sony, but it is damn annoying. There seems to be two speeds, one that is low and runs silently, and the high...this is the problem.
I just bought 2x2gb ram from my Acer Extensa 5610 and my Windows 7 x64 can see it right, but only use 3gb. Resource monitor says the other 1gb is Hardware reserved. In the Bios theres an info saying extended memory 3gb. Is that what the problem is? coz its not something I can set in this version of bios.
Do i have to upgrade my bios? if so, to what version? The manual clearly says i can upgrade to 4gb. (extensa 5610 has intel 945 chipset)
Have you guys heard about Acer's Extensa line of products? Well, so far I've just seen them in Acer sites from Asia, and I was wondering how many people actually use them already.
Another thing, I was also looking for someone who particularly owns an Acer Extensa 4630G--the most recent budget one (I think) with Intel C2D T5800, ~4GB 667MHz RAM, I think with 320GB Harddrive, and ~nVidia 9300M GS~ (256MB dedicated)
For people who own this kind of notebook (or those with the 4630ZG, the one with the Pentium Dual Core instead of C2D), how does the notebook handle? Does it heat up easily? Does it perform well with relatively recent games/3D modelling applications etc.?
I just purchased a acer extensa 4630Z and it has vista home premium on it. I want to downgrade it to xp, but when i put the a oem xp cd in while the system is booting up it preloads all the xp files but then get a blue screen with error 0x0000007b. How can I get a xp cd that will support this laptop?
I know you can use nlite to make a custom xp cd but I cant seem to find the right drivers to do so. I seen some people add slipstream drivers for aspires but this is different.
i find in this web more and very good information about notebooks, with this information can i upgrade the CPU of my Acer 5715Z from a T2370 to a T7500, and i know this chipset 965 can i ugprade more, but know i have a very good offer to buy a cheap notebook Acer Extensa 5230 with a Celeron M575, and put in this one my T7500 to upgrade this bad cpu celeron.
But, there's always a but, i search information in the web and i think this chipset is not compatible to upgrade a good CPU (not Celeron).
This is the information about notebook:
And this about chipset (GL40), look at information about only CPU's Celeron
My husband dropped his Aspire 3680-2682 the other day and the screen went wonky. I booted it off a VGA monitor and it seems to be fine running from there, BUT I could not get it to boot to VGA except in safe mode, and when I choose to boot in regular mode it goes to the LCD screen and doesn't allow switching the display to the external monitor.
This is the only thing that concerns me that it might not be just the screen that sustained damage.
I was eventually able to get th bezel off (it doesn't come 100% off on this model but doesn't need to) and remove the lcd panel for inspection. The thin board taped to the back of the panel doesn't seem to be visibly broken or strained and the connectors to it were taped so firmly in place they didn't budge on impact. The small board that rests at the bottom of the top case under the bezel (the inverter?) can't be inspected well and I don't want to damage it by trying. In any case nothing appears damaged to the naked eye on or around the screen.
The first pic is how the screen looks when booted; it also (visibly) flickers and redraws continuously. The second shows that applying pressure allows a clearer view of the console and stops the flickering.
I have found a replacement screen online for 50.00 and feel comfortable enough trying to replace it rather than spend the cost of a new laptop on sending it for repairs.
However, if it's not just the screen I don't want to throw more money at this.
In your experienced opinions, does it look like the damage is typical of a broken LCD screen and not something in the motherboard? (no clue on how to get a closer look at that stuff. took every screw out of it last night and couldn't get the bottom case to reveal its secrets.)
I have a Acer Aspire 5590 and where my mouse pad is the left button ( left click ) is broken like it moves and doesn't click properly. I was wondering if you guys know how I could fix this or get a new button?