I have the same problem as the user in another thread Acer Aspire 6930 screen replacement
but since the layout of 6920 and 6930 are different, I stuck at the part when I have to pull out two video cables beneath speaker cover, cause there is only one cable (that I am aware of) in 6920. So I hope someone could explain to me what to do next after removing speaker cover, cause I don't want to brick my laptop
My 6920G went down a few days ago, I sent it to local computer store to have it diagnosed. It turned out that they say it is a mobo issue and said that it would cost aroun 400 to get a new mobo + labour fee.
I don't have any warranty on theis laptop, and the 1 year warranty by the manufacturer has expired. I am just wondering if I can order the mobo fron Acer and maybe replace it on my own.... I don't know which would be better, to have the guys at the store do it for me or phone Acer....
I spilled something on my 6920G keyboard and now it's totally ed... I use it on the move so using an external keyboard is not an option for the most part. I also need it for my course, so I'm completely ed at the moment.
I need to get a replacement keyboard as soon as I can and I also need to figure out a way to disable the on board keyboard on board when I'm using an external one.
Most of the keyboards on Ebay UK cost £23 with £9 shipping which is an awful lot for such a flimsy keyboard. Is there anywhere I can get one for cheaper?
I don't know what happened but now when I tilt my display past a certain point, the screen display gets garbled. It does look like one of the joins at the back has come undone too, probably related. Must be a loose connection.
Best to send it back to Acer? It shipped with a faulty mic connection too to be honest.
What would be the best way of getting it back to Acer? I'm in Ireland I ordered it off laptopsdirect.ie. It's still a few months within warranty as far as I'm aware. I don't want to strain my neck too much so I will need to get it fixed soon enough.
I'm sure I'm not the only one that thinks 720p just isn't enough.. I've been shopping for a new LCD panel for my 6920G, but was wondering a few things:
Brief background on my box:
T5750, 4GB, BD (Optiarc), PM965, 9500M GS, 1366x768.
Ideal:
T9300, 4GB, BD (Optiarc), PM965, 9600M GT, 1920x1080.
I'm going to start with the LCD panel first. The benefit from CPU upgrades seems nominal, and GPU upgrades seem expensive and a PITA.
a) Is there a guide/howto regarding how to change panels yet?
b) Is there any issues going from 1366x768 -> 1920x1080? Is it even possible?
c) I can't seem to find reliable places that sell the SAMSUNG, is a place like this reputable: [url]
Is there any way I could get a replacement screen with a better contrast ratio?
View 4 Replies View RelatedI have a 6920G which somehow got a hair behind the screen some time ago.
My warrant ended some time ago so I guess I need to remove it myself, if I want it removed (and I do).
The hair is in the middle, not too far from the bottom so it sure is annoying. It looks like a very, very thin strain of hair, most likely from one of our cats.
I have googled for many hours for ways to disassemble my laptop and even tried it myself without a guide and I came pretty far until I gave up in fear of breaking the screen.
Do anyone have a guide or something on how I can remove the LCD to clean it off? Far as I understand service manuals are not to be asked for (for legal reasons?) so a guide or detailed instructions is what I desperately need.
Been trolling around here for a while for great advice for my laptop but it seems that I've got a problem now.
While just doing everyday work my screen started showing a grainy/ red tint all over with slight adjustments of the screen angle, it's progressively gotten worse as now no angle at all will give the clear normal picture.
The machine itself is working fine and when I plug it into an external monitor the picture is perfect, it just seems to be occuring on the screen.
I was wondering if there was anything I could personally do to fix the problem as I don't really want to be shipping it to Acer at the moment as I'm out of the country for a while.
My acer 6920g restarts itself frequently after showing blue screen. The error in the blue screen is "driver_irql_not_less_or_equal" each time. I tried updating my driver to the new one but still the same problem.
View 10 Replies View Relatedproblem with my nvidia drivers.
Laptop:Acer 6920g, Nvidia 9500M GS, Vista 32-bit
Problem:
Whenever I upgrade to the latest NVIDIA version drivers on laptopvideo2go, I have a problem with my screen brightness and vista power plan.
Currently I have the nvidia driver 8.17.11.9581 installed (195.81).
If I unistall any other higher version driver from acer's default driver than the power plan and screen brightness work, however if I use the latest driver then the problem happens.
I have tried to install XP Home on my Acer 6920g but with no success.
I made an XP disk with the sata drivers via Nlite which was recognised, installed the OS but on first boot the laptop gives me the BSOD but as it is so quick I am unable to get any error code. The laptop will not boot on safe mode either which makes me think there is a physical (hardware) issue that doesn't like XP.
I have an Acer aspire 6930G home theatre system. The screen has been cracked and needs to be replaced. Can anyone help with either instruction on how to remove the screen.
Any help would be much appreciated.
I have got the top and sides of the front bevel off, but I cannot see how to get the bottom off and I do not want to damage it.
Hi all, new person here. I did a search on LCD screens but can't find my problem anywhere.
Here's the background and problem:
Vostro 1500 with Chungwha 1280x800 screen that got cracked by my kids. I ordered a replacement screen from a company off Amazon.com that was highly rated. Got the screen and installed it. It is make by Chi Mei. When I powered up the computer I got 8 screens of start up and it was very dim. Once it went past the Windows start up screen everything went black. It would only continue to Windows screen, still showing 8 windows in safe mode. I hooked up the old screen and everything worked fine.
I contacted the company and they air expressed me another screen, which I received yesterday. Hooked it up and got the exact same problem, which leads me to believe it's the Dell that doesn't like it. I will try and attach some photos because I am at a loss.
Thanks for your help in advance.
HP 17t-2100 CTO screen is light, or lines, horizontal across screen.
Â
LM125AV
Â
How to remove the screen from the base of the notebook, and how to test cable, or LCD screen itself? Is replacing the LCD screen the correct option?
Â
Running Win7 64bit
I downgraded the screen of my laptop from a screen with a resolution: 1920x1200 (LP154WU1) to a screen with solution of 1280x800 (B154EW01). Since then I have display problem as shown the follwing pdf: [url]
View 14 Replies View Relatedi broke my lcd screen a few days ago and i got a replacement from ebay. i installed it but i can see the image on my screen but it is verrry dim. there's no back light. so i put the old screen and turned it on and the back light is very bright but the lcd is cracked and messed up. i don't understand how could that be that the new screen is dim and the old one still is bright but messed up.
the model of the laptop is hp dv6605us
how to remove the lower part of the screen bezel? I removed the two screws at the top, popped it off all the way down to the hinges,
View 4 Replies View RelatedI have a Dell Vostro 1500 (bought in 2007). I recently dropped it on the ground and the screen backlight got damaged. I ordered a new screen off eBay. I need help figuring out whether the screen that I ordered is compatible with my laptop. Here are the specs:
Original Screen:
Manufacturer: AU Optronics
Model: B154EW02
New Screen:
Manufacturer: AU Optronics
Model: B154EW02 V.6
The original screen doesn't have any version number, but the new one is V.6 (I'm assuming V stands for version).
Both are 15.4" WXGA, 1280 x 800 and Wide (16:10). The only difference that I can find is that the original screen is glossy, while the new one is matte.
Does the version number (or glossy/matte) make any difference?
I currently have an XPS m1530 with the WXGA glossy screen (1280x800) and was looking to replace it with the WUXGA screen (nothing wrong with the current screen; just need more resolution.)
Questions:
1. Can I just do a simple swap? In other words, do I have to worry about details like video card etc.?
2. What are the questions that I need to ask before buying one? (e.g. Manufacturer, warranty, brightness, type etc.?)
3. Glossy vs non-glossy - please let me know your opinions
4. Would the ones sold on eBay (links below) work fine? .....
My M1710 is 2.5 yrs old now but is still working fine for me. The only problem is is my LCD screen has some problem and i see a lot of dots on it especially when the background is dark like in a horror movie.
But still it is usuable. I showed it to my local engineer and also contacted dell and they asked me to get a new warranty and they will replace the lcd.
But I don't really want to spend that much and I have a spare LCD monitor which i am currently using with a VGA cable. I can do tasks as long as it doesn't require me to use the keyboard as the screen is almost closed.
I bought my XPS1530 about a year ago. I am impressed with it, i hadnt used a laptop before and now i have tried a few different ones i have decided that the 1280x800 screen could be improved to a bigger resolution.
Is it possible to just change the display to a bigger one? or do i need other bits and pieces? The mobo was replaced last week due to a glitchy gfx issue .....
I have an e6500 with a WXGA+ screen... just curious, if it were to get damaged and I needed to replace it, where could I get another screen?
(Googling around, I see many different 15.4 WXGA+ screens for sale, but I have no idea how to tell if they are compatible with my laptop
hey recently i kept getting red lines on my screen because of cable problems. So i asked for a replacement laptop and they agreed.
However the red lines sometimes goes away like 20% of the time i turn it on.
So i was wondering if they might charge me afterwards because they dont see any immediate problems.
In general, for screen replacement on a HP business notebook, what is the best option?
1) Ship it back to HP
2) Let a tech replace it onsite
3) Ask for the whole display assembly and replace it myself
I've mostly had Dell business notebooks in the past, so I'm not sure how good HP business repair quality is. I've searched the forums here and found some stories of people not being very happy with their repair quality when it has been sent back to HP and when they've had technicians on site so I was considering just asking for the whole display assembly and then replacing it myself.
I cracked my screen a while ago, and ordered a new part off some dinky little website. I was aware that the resolution would be 1366x768 instead of 1600x900 on this new screen, but I was unable to find the exact part I broke. Now, many months later, I decided to search again. I found this page.
Would anyone be kind enough as to look over those, and let me know which screen would be the 'best' one to get, whatever that might mean. I notice they are all the same price, but have different specs in the names. I am more of a software guy, and rely on others help for hardware advice.
i have a inspiron 6000 model# PP12L and need a new screen.
the one that is in there has the number 154X2LO2.
do i have to get one with the same number or can it be a different one, like one of these: LTN154X1, LTN154X2, LTN154X3, LTN154X3-L03, LTN154X3-L06, LTN154X3-L09, LTN154X3-L05, B154EW01
i have an 11.1" screen tx series, but the screen is cracked.
i have checked on various site, ebay store, and the cheapest i can get an oem replacement is around $300.
i am just wondering is it possible i can just buy any 11.1" netbook, and use its screen on the sony machine? since the netbook costs about the same as the lcd screen, and i can use the other parts too.
I'm looking for a replacement screen bezel/surround to fit my SZ61WN/C (mine is cracked in half at the bottom between the N and Y of Sony! N is lost in the abyss so I currently have a SO Y Laptop ).
After a bit of digging on this site I have found the disassembly guides and nexttronics who will deliver what I need to me here in the UK, my only issue is that I'm not sure which one I need to buy.
I'm think its one on this page (below) under the "lcd133led" section as it is an led backlit screen with motion eye camera (on diagram as 1011).
[url]
My model isn't listed as its a European version (the SZ61WN/C is an all black Premium Carbon model), is there an equivalent US model number that anyone knows of?
i have recently purcahsed a 2nd hand DV9605ea laptop, which had a broken screen
i purchased another screen from ebay and have sort of succesfully replaced it.
however there are a couple of problems. firstly the screen that i took off had only 2 leads that connect to part of the motherboard, and the replacement has 3. i have connected up 2 of the wires and the monitor is working but i can only get a screen resolution of 1024 x 768. i have tried to install the nvidia drivers/software but i keep getting the error message no hardware found for this software. this also happens when microsoft updates tries to install the same software.
i guess that the monitor i am using is obviously from a different spec macine although it is from the dv9000 series.
can i use it with only the 2 cables and still get it up to 1400 x 900?
or can i upgrade the graphics card?
here is a link to show what 2 wires i am refering to.
[url]
I ran over my laptop and cracked the screen. I was wondering if I could upgrade the screen to a higher resolution as seen in this post.
The replacement screen for my HP is part number: 570095-001
The specs:
1366X768
15.6 inch screen
WXGA
Glossy
HD
Widescreen Display
LCD LED backlight