it is a Acer Aspire 3680, the other day the clips that holds one stick of memory in broke, does anyone know how I could fix this, was thinking of gluing the clips back on or using electrical tape to hold memory in place,
My husband dropped his Aspire 3680-2682 the other day and the screen went wonky. I booted it off a VGA monitor and it seems to be fine running from there, BUT I could not get it to boot to VGA except in safe mode, and when I choose to boot in regular mode it goes to the LCD screen and doesn't allow switching the display to the external monitor.
This is the only thing that concerns me that it might not be just the screen that sustained damage.
I was eventually able to get th bezel off (it doesn't come 100% off on this model but doesn't need to) and remove the lcd panel for inspection. The thin board taped to the back of the panel doesn't seem to be visibly broken or strained and the connectors to it were taped so firmly in place they didn't budge on impact. The small board that rests at the bottom of the top case under the bezel (the inverter?) can't be inspected well and I don't want to damage it by trying. In any case nothing appears damaged to the naked eye on or around the screen.
The first pic is how the screen looks when booted; it also (visibly) flickers and redraws continuously. The second shows that applying pressure allows a clearer view of the console and stops the flickering.
I have found a replacement screen online for 50.00 and feel comfortable enough trying to replace it rather than spend the cost of a new laptop on sending it for repairs.
However, if it's not just the screen I don't want to throw more money at this.
In your experienced opinions, does it look like the damage is typical of a broken LCD screen and not something in the motherboard? (no clue on how to get a closer look at that stuff. took every screw out of it last night and couldn't get the bottom case to reveal its secrets.)
My brother just bought an Acer Aspire 3680.He purchased 1 gig of DDR2 Memory from Crucial. When we get to the desktop the screen is fine at first then the screen goes off and back on with 8 bit display. 512 DDR2 came in the machine. Crucial site said he could mix memory sizes. I tried it with the 1 gig stick by itself in case the mixed memory was the problem. Same thing..I've tried 2 sticks of 512...same thing. I've tried 2 sticks of 1 gig each..same problem. This laptop won't allow any upgrade at all. Will only run correctly with (1) 512 stick. I've never seen this problem before. I've installed many memory sticks in computers. This is a first for me. What could be causing this?? Any advice would be appreciated. BTW. the computer shows the upgrade amount of memory but the display color keeps changing to 8 Bit! I change it back to 32 and it reverts back after a few moments to 8 Bit. I went to Acer and installed an updated driver for the Intel Graphics card thinking the driver would help. I haven't installed a bios update yet. Called Acer and they said to return it for repair.
My laptop wont turn on at all, no lights at all. The power supply is fine, and I opened it up and found a few burnt capacitors. Ive searched on ebay for Aspire 3680 mobo but all have different model numbers to mine. My model number is DA0ZR1MB06D1 REV.D. Also on the RAM socket it has another number which is MBAZL060017090E53B2505 and below that it has 31ZR1MB00I0. I cannot find one on ebay with the same numbers as above. Will it make a difference if I get one which has a few numbers/letters which are different to my current one?
I recently picked up a 3680, upgraded to a 320GB hard drive and switched to xp from Vista. Runs great but the speakers sound like they are down in a well literally. Could it be the drivers or do I need to replace the speakers? Anyone else have this problem? The reason I believe the speakers are ok is when I use headphones it sounds the same.
I Bought and Xp Disk but, It doesnt detect my harddrive (Classic Sata Problem)
So I hear there are two ways to get around this...
1.)Change AHCI in Bios, which doesnt work for me because my laptop doesnt seem to have this Option in Bios, so thats out...
2.) And Slipstreaming which I have found drivers that people have refferred to other people but I dont quite understand how they work...(The tutorial I was reading and the drivers I downloaded didnt add up)
So I was hoping someone could give me specific instructions( for my model) for either of these methods to install Xp (Spent lot of cash on the disk dont want it go to to waste)
Basic issue is that all of a sudden the touchpad has stopped working and that little icon that was in the systray has dissapeared. it was working fine a few weeks ago. i currently am using a USB mouse, but i need the touchpad at uni as the desk space is very limited. its a shame this issue has came up now a day before a MAJOR assesment is due, and i cant finnish it because i cant use the mouse at uni.
Anyways, so i have tried the FN+F7 thing, doesnt work. Tried Re installing and rebooting the drivers, still doesnt work. tried a system restore to when it was working. still doesnt work i have basically tried EVERYTHING mentioned on various forums and on google. nothing seems to work. the drivers appear to be installed but wont work for some reason. i will attach photos to the main options so you can see how it appears to me.
there are no bios otpions i looked for those. seriously its so weird, nothing works and its very frustrating! in the past few weeks i have installed adobe illustrator CS3, dont know if that could be the reason for it not working, but i dont think so. I have windows XP SP2. when i try installing the original drivers off a backup cd my dad made, it just installs and does nothing. i downloaded the newest drivers from the website and still the same thing. the program does appear in the program files, and the control panel/add remove, but just doesnt seem to run!
overclocking the Intel Celeron 440 Processor on the Acer Aspire 3680. Here is a screenshot:
As you can see, I overclocked my friend's Acer Aspire 3680. The Celeron M 440 went from 1.86ghz to an amazing 2.35, for an increase of 490mhz! Now, this is definitely not going to be the most safe overclock, and it will consume a lot more power and heat up much quicker, but it is just to show how much you can overclock the Acer 3680.
Here is how I did it:
1. Download CPUCool. (Costs $18 to save your stuff, otherwise it won't for the shareware version)
CPUFSB did not work for me but it may work for you. It is free. Try it
2. Install CPU Cool and say yes to a desktop shortcut and running under windows start up. Now, restart your computer as it tells you too.
3. Go to Functions, change CPU FSB, and then select I don't know. A PLL drop down menu should show up.
4. Make sure it is ICS on the left. Then, go down and choose 954310 all the way at the bottom. Click fine tuning, click ok, and then it should show your frequency. If it doesn't show 1866, and a number less, then download Rightmark CPU Clock Utility and select throttling under profiles and set it to 100%. Unforunately you can't change the voltages.
5. Click fine tuning in CPU Cool, now it should show 1866mhz. Just add 60, 10, or .10 or so mhz by click + 60, +10, or just +. I recommend 2000mhz for the best balance of speed, power, and longevity.
6. Check both boxes as the right under Tray Frequency 1. Click set frequency, ok, and then minimize to tray. Do not close, because your clocks will be reset!....
I just bought this new acer 3680 1 month ago because i needed a laptop for my studying. basicly all i need it for is to take notes from classes, and surf the web (youtube etc). ok so basicly the first impression with preinstalled vista was horrible. incredible lag... 3 seconds delay at all times when browsing the web. and completely unable to playback any form of media with any other windows open without the sound lagging like crazy... all that kind of stuff
but the main problem seems to be the fan. It runs at high speed (producing as much noise as my desktop computer). The fan turns on aprroximately 4 minutes after you turn on your computer, or immediately after you open an application.. and it just keeps on running untill you turn off your computer... It is so annoying that i have trouble bringing the computer to class (which is where i really need it!) because i feel embarrased about the noise, and frankly i think this is an annoyance to the other students aswell. Is this a common problem with 3680? No one of the other students pc's fans run when they just use basic applications like word, or internet explorer, and they certainly dont do it when simply idling on the desktop.
furthermore it needs to be said that i have messed around with vista alot, and tweaked it in every possible way to remove pressure of the cpu.. and ofc removed all antivirus programs etc. Furthermore i tried installing XP, and guess what.... it took 5 mins of idling on the desktop in the brand newly installed xp for the fan to start again!!! so i conclude that the problem is not caused by vista overloading the cpu!. Does anyone else have this problem with their aspire 3680? maybe im just overly sensitive about the noise, but really it isnt supposed to run at all times.
I recently downgraded my girlfriends Acer Aspire 3680 from Vista to XP as it became apparent that this notebook couldn't handle vista well; (on a side note, this is the second aspire 3680 that I have downgraded). For some reason no matter what I do the computer does not see the internal dial-up modem. Now, as its internal there is no installation disc, I have downloaded 6 different acer aspire 3680 modem drivers from Acer support centers and not a single one worked. In the Device manager, the modem drop down is not even there. I ran the modem troubleshooter and it detected no port was found, but Ports weren't in the device manager either. This one is really stumping me and i'm tired of looking at that screen.
My high school-age son was working on an English paper when something fell off a shelf and whacked his Aspire 3680 right above the hard drive bay. It started clicking and finally crashed.
The computer won't run with the hard drive installed. It makes nasty clicking sounds trying to boot, and finally beeps and powers off. Without the hard drive, the laptop powers up and runs BIOS just fine.
We can buy a new hard drive, but it seems awful to pay Acer another $20 + $10 shipping for the Vista restore disk!
I have an Acer Aspire 5720 series with a seagate momentus (5400.3 120GB).
I am pretty sure the HDD is stuffed. The notebook tries to start and gives me different error messages each time basically to contact the hardware manufacturer. The HDD also seems to make a click or clunk noice every so often as if it is having trouble reading.
Anyway main question. If I replace the HDD how do I get this notebook working again... no recovery CD's or anything?
I have an Aspire 7738G and I have a few questions.
My subwoofer seems to be broken, sometimes it sounds as it should but sometimes it sounds like a broken speaker. Have anyone else experienced this? Is there a easy fix or do I need to hand it in for repair?
When it was new 2 months ago I began with creating two partitions on the windows drive (it has 2 harddrives) because I don't like it when the windows partition is on 500 gb, then everything got screwed and nothing worked (I so hate the MS partitioning tool).
Because of this I lost the backup partition and the genuin OS. I have ordered the windows seven upgrade but I wonder, can I do a clean install without having a genuin os on the pc, with the upgrade kit?
Is there anyway I get a new backup partition?
I do have a serial on the back of the laptop for vista, is there anywhere I can get the oem dvd for vista for this laptop and install it with my serial?
Right now I have windows 7 RC and the volume touch slider does not work. I can't find any drivers for it on the acer driver site. IS it broken or what is wrong?
My touchpad broke days after I got the laptop, I go to Acers site for drivers and then when I download them I get told they have errors. I cant click or scroll with the buttins either, it is utterly useless and I am having to use a terrible USB ball mouse.
I have a Acer Aspire 5590 and where my mouse pad is the left button ( left click ) is broken like it moves and doesn't click properly. I was wondering if you guys know how I could fix this or get a new button?
Aspire S3. The PC is perfectly fine, except the fact the the screen is broken. It already broke twice (just by opening...), so we are not spending money on a third one.So, what I want to do is to connect it to an external monitor through HDMI (and possibly remove the broken screen, since it has no use). I can do it in Windows, but not outside Windows (BIOS) and I'd like install Windows 8.1 or 10. So my question is: can I force output from boot into HDMI? If so how, if not, what alternatives do I have to install a new version of Windows without spending a small fortune?
I bought a new Acer E5-571-5552 recently, it came with Windows 8.1 64bit. One of the ways I use my laptop often is in "docked mode", basically connect it to external monitor via HDMI, and external USB mouse & keyboard. I set the windows power options for "close lid" to do nothing, then it works fine like a desktop. This works fine with all other laptops I've used in the past (Lenovo, HP, Toshiba...etc). But this new Acer has trouble waking from sleep, the USB keyboard & mouse only light up, but doesn't wake up the fan/drive/monitor. I have to open the lid and press a key on the laptop (USB keyboard/mouse still doesn't).
I've opened case 3601882U and chatted with 2 agents, one had me update to latest BIOS 1.11 which didn't resolve it. The other tried to insist it was a limited feature, that the Acers had to have lid open to wake up the computer from sleep. I think this is a broken feature. Is this true for all Acers, or just this windows 8.1 model?
Considering an Aspire One right now because it is less expensive than the others. I have a 512MB RAM (DDR2-PC5300) and 80GB 2.5" SATA HDD from my Thinkpad (which I upgraded both). So, I think maybe I could buy the Aspire One the cheapest version (8GB I guess).
So, is it can be done? I know that there is SATA version of the Aspire One but not sure the connector will be there in the SSD version. Try to google it but found only SSD upgrade....
I recently upgraded the ram in my 5315 with 2x1GB 5300 DDR2 sticks. Ever scince i did the upgrade i have had the Memory Management Blue screen about once every 3days. The sitcks are installed correctly and ive even tried swapping the order of the sitcks in the slots and i still have this problem. running Vista Basic 32-Bit
I recently purchased a 5517-5779 from best buy. Got a nice deal on it and i think im starting to see why...its only a 160gb HD which im kinda kicking myself for getting. To start with i was sitting at about 105gb with nothing of my own installed.
a week later im sitting at 99.6gb. i have still installed nothing. i have used many HP's and havent had this problem.. there seems to be a memory leak somewhere. Are these prominent with Acer products? I should have familiarized myself with Acer a bit more before purchasing one of their products. If i could resolve this issue i would be 100% satisfied with my newest purchase.
ETA-The pc has already had the geek squads "optimization and restoration" done.
I have an Aspire E1-571-6650 that is about 1.5 yrs old. I am getting messages that I am almost out of memory (currently 4GB of memory). Not sure what is using up the memory as I don't do any gaming or graphics. I do use the internet, facebook, MS Office, MapQuest, Google Earth, etc.
Beside why am I running out of memory? Can I add memory to this notebook? Got plenty of disk space but might want to add an additional 4GB or more of internal. Possible?