Acer Aspire 5745G :: Black Screen When Restart After Update Newer BIOS Files
Mar 9, 2015
Acer aspire 5745G, everything was working fine until i tired to update newer bios files, but my laptop restarted and now when i try to turn the laptop on, nothing happens and nothing appears at all, only the power button is flashing, so i googled it a little bit and i found out that i need to download a BIOS files and unzip them to my formated USB, i did that but nothing happens when i try to hold FN button + Esc ......
I've spent 3 days and countless hours trying to find the solution to a black screen after attempting to update my daughter's Acer Aspire 5742Z from the bios it had to the latest bios available on the site (1.30). I ran the windows version from windows and I clicked thru the various dialogue windows appearing to be on its merry way. At one point, the screen went black and after about a half hour it stayed that way so I unplugged it b/c it wasn't responding to the power button nor the ctrl-alt-delete. I've tried using a usb stick formatted to both fat and fat32 containing the dos version of the bios files and the full contents from a windows 98 startup floppy disk i dusted off from retirement. I also tried a cdrw and cdr only containing the bios files. In all attempts, the hdd led and either the optical drive or usb stick led blinked a little before dying out and nothing more.
I needed to use Windows resore. after restart, the acer logo dont show and laptop stay in black screen and HDD LED blink in aqual time slice. Then after a few minutes acer logo shown and Windows starts.
This, happend few times but now acer logo dont show and it stay in black screen .
I have a relatively new Aspire E1-522. Was in the middle of watching Netflix when it conked out. Now, when I turn the power on very little happens...the blue light comes on, the fan comes on and the screen backlight comes on...and then goes out...and then comes on again...etc.
Basically, turning it on doesn't even get to the Acer logo. Cannot get into the BIOS by any means. In my research this sounds exactly like the Aspire One black screen of death, although I haven't found references to it with respect to the E1.
I think the BIOS is fried. How to re-flash it on the E1-522? I cannot boot windows, so I can't use the self-extracting EXE. I need to be able to flash it from the bare bones hardware like the fix for the AA1 ....
I attempted to update my bios for my Acer Aspire 5745 notebook and chose the wrong file. The computer is giving me a black screen now. When I push the start button the lights come on the fan blows and thats all. I found a few sits on line giving me the procedure to flash an aspire one system. Here is the steps I took to do so to no avail.
1. When to the acer site and put the SNID number to my laptop to pull up my suggested downloads for my system. 2. I downloaded the file to my working computer. 3. I extracted the file and opened the file that said DOS. 4. I renamed the file zg5ia32.fd 5. checked my flash drive to make sure it is set to ( FAT ). 6. Transferred the file to the flash drive. 7. Pluged in the flash drive to my dead laptop while it was pluged into a powersorce. 8. Held down the FN and ESC buttons while pushing the power buttons. 9. Released the FN and ESC buttons when I noticed the power light blinking and the flash drive light up. 10. Waited for over 15 min. but had no success.
I also opened up the backside to the laptop and removed the little battery that was plugged it with a small white connector assuming it was the cmos battery but still nothing happened.
I cannot turn off my acer laptop since windows 8.1 update.. whenever i do shutdown, it simply just restart after shutting down.. i dont know how to turn off my laptop.. also sleep and hibernate seems not functioning, in a couple of seconds it awakes again..
I tried the every thing about the power management to untick something about fast startup.. still no luck
And i forced to shutdown my laptop during startup but it cause me a problem.. It wont power on.. and it seems dead but when i plug the power adapter the battery is charging but no signs of powering up(no power led, just battery led) whenever i press the power button.. i tried dispersing the static electricty but no luck.. the only option that solve my problem on not powering up is to disassemble my laptop and remove cmos battery. then i assembled it back.. it shows 1 blink of power led whenever i plug in the ac adapter without the laptop battery plugin.. and then it powers up again after i press the power button.. what a relief.. but it doesnt fix my shutdown problem..
the only thing i havent tried is BIOS update.. but im having problem right now..
i tried last year to update my BIOS after that it went wrong the black "screen of death" they call.. so i sent my laptop to service center.. and it fixed!..
I tried lately to update my BIOS but it says that i have already an updated BIOS version 2.19.. i guess this is the bios version installed by service center.. how can i apply the BIOS posted on ACER website with the latest version 2.15?
If i want to turn off my laptop, i simply close the lcd monitor to remain it in sleep mode..
I just formatted my yoga 2 pro, downloaded the drivers and ran the Bios Update. I followed the instruction on the read me, ran the .exe, clicked next/ok until the laptop restarted and if I'm not mistaken a red menu with a progress bar showed up. At that point I left and when I came back a few minutes later the laptop was turned on, the screen lighting was on but the display was black, the keyboard backlights were also turned on and everything else was off. The lights on/near the power button that signal if it's turned on and plugged to the AC are turned off.
It's been like this for over 30 minutes now, no signs of progress. I'm not very keen on turning off or unplugging the laptop while flashing the BIOS, but at this point there's not much else I can do.
I have an Aspire 5515 with the black screen of Death. It is running Windows Vista. When you boot up lights come on, fan and HD are on but no screen. I was told to re-flash bios to fix it, so I downloaded Bios from the support site.
I have an aspire 4745G which AMD Radeon Graphics might somehow be corrupted, and so ever since I was using the Intel dedicated VRAM, However I have accidentally changed graphics from switchable to discreet in BIOS and after restart all I get is black screen. I tried resetting the BIOS by shorting the jumpers beneath the WLAN card as per the manual but its still no good. The only thing it does after turning it on is that the HDD LED lights up for a second and then gone all black screen ...
One morning, laptop powers-on (Blue led on power button and on front bezel), no display, fans spin up and down, CD drive makes the usual seek sound. Attached external screen from my desktop, no display either, no POST!!. Removed HD, RAM, NIC, no change. No beeping what so ever, really looks like the notorious Acer BSOD i've read about. What I need is the EXACT name I should rename the BIOS file (JE70D118.ROM) to be able to use the Phoenix BIOS recovery function (FN+ESC+PWR) with the BIOS file on a USB key or SD card. Seems to be a national secret or something... Acer does not seem to have this documented anywhere.... including the actual BIOS recovery procedure....
I have an Acer Aspire E5-511 that stopped booting last saturday, from what I've found I have the black screen of death (or a dead motherboard, but I'm trying to keep it positive). I think I have the proper bios .fd files, but I'm not too sure, and I can't be sure about what to name said file. I can't be sure I'm going into the Crisis mode, but I do know that If I'm holding down fn+esc when I hit the power button then the processor fan runs alot faster.
I recently upgraded the bios on my Acer Aspire One 725-0670 from version 1 to 1.08. Now I am experiencing blue screen of death intermittently so I would like to rollback to the prior bios version to see if that would resolve the issue.
I went to the Acer drivers website but only the newer 1.08 version is there.
One way I saw on the web to rollback the bios was to disconnect the button cell battery on the motherboard - the writer says that will default the computer to the original bios.
Unfortunately that involves an almost complete disassembly of the computer. Original bios available or some alternate method to get back to bios version 1.
I'm trying to reflash my BIOS from a USB stick to save a dead Aspire V5-122P. All I find is that I should extract the BIOS files found on the Acer website and load the resulting .fd file onto a USB.However, as my laptop is dead I have only a borrowed MacBook to work with, and none of my efforts to unzip the .exe file to its constituent parts have been successful. What is the BIOS files available for the V5-122P can be extracted, and if not tell me if there's any other way to find the correct files to reflash the BIOS?
I am trying to determine the maximum memory and configuration for my Apire 5745G i5. Is there somewhere I'm supposed to be able to find this information? I couldn't see it in any of the manuals. How much memory can I run total? How much per slot?
I have a HP G72 250US laptop with Windows 7 (64-bit). Laptop has been intermittently stopping. Screen goes black then shuts down tries to restart and sometimes does but screen is black so can’t see what’s on screen. Other times it just shuts down completely. Sometimes screen goes haywire with bizarre horizontal color lines mixed with strange pixelated graphics then goes black.
After restarting in safe mode and ran CCleaner then performed a Hard Reset which seemed to work for the rest of day but next day within an hour screen flashed, went black then came back on again. This time a notice come up but I clicked it thinking to get more info but only made notice go away. It said something about Intel Graphics Accelerator stopped working and had successfully restarted.
I have Intel HD Graphics Driver version 22.214.171.1246 which is what’s listed on HP for correct graphics driver.
I have an Aspire 7720z. As Vista was having so many glitches, I set up a dual boot system with XP and Ubuntu 8.10 on two partitions on the same drive. Last week I upgraded Ubuntu to 9.10 but started having power problems. I read somewhere that a BIOS update would help so I flashed to v1.45. Everything is now going great with my Ubuntu OS. The problem lies in Windows. When I try to boot to XP the splash screen comes up for a couple of seconds and the the computer reboots. I used a test disk to check the drive and everything is fine. I then tried to repair the XP installation with the install disk but was told that it couldn't find an XP installation. So, for the umteenth time, I tried to re-install XP but was told that the installer couldn't locate any devices to install onto. Completely bewildering as my Ubuntu installation works perfectly.
My Acer Aspire 5517 Laptop is running Windows 7 X 64 with an AMD Athlon TF-20 Processor at 1.6Ghz with 2GB of physical memory. Every once in a while, and lately quit frequently, my screen goes black, and it will not boot...I have attached an exterior Monitor to it, with no success, so I assume it is not the video portion. To get it to boot I turn it off and on until it re-boots. Sometimes it reboots quickly and at other times it takes several minutes...up to 20 or 30 sometimes. I have run a disc check to see if all the sectors are good on the hard drive. It checks out okay..I thought if the BIOS was out of date, I would update it, to see if that work....
I have an Acer Aspire 5100 AMD Turion 64x2 Mobile Technology TL-56, 1.8 GHZ Radeon Xpress 1100 hyperMemory 1 GB DDr2
It has vista home premium preinstalled. Lately I installed Xp on it (Ive done it many times before because its faster) The only thing is that with Xp it shutsdown after some time, 'cuase of the heat. So I thought I'll update the BIOS. It went well but then IT shutsdown! I was afraid of this but it happened. Now my Lap won't boot, nothing comes up, not even a sound! The only thing that work is the dvd driver. The fan goes like it would boot but nothing. I tried to flash it via usb but didn't read the usb.
I attempted to update the BIOS in my Acer Aspire 5315 laptop to no avail, the winbios program froze straight away, while erasing the BIOS I think. So since then I havn't been able to start the laptop, no fans, but does blink a red LED beside the little light icon when left for longer than 10 seconds or so when you press the power button. I've tried the fn+esc method to boot it to flash the bios but nothing at all, tried it with USB and CD-ROM. I've tried removing all the hardware and starting it, I've also tried resetting the CMOS, still no luck.
I'm thinking that the red LED might be a little indicator of hope, or is it maybe the capacitor filling up
I updated my Acer Aspire 4752g's BIOS to use the BIOS_Acer_2.10_Windows.zip in the BIOS downloads in the Acer site and when my laptop rebooted it was stuck in a black screen. I've tried doing the FN+ESC and tried all the BIOS downloads in the Acer site but it still did not work.
I have an Aspire E5-571 without pre-installed OS. I don't care about Windows - I am using Linux (Ubuntu).
There are some problems reported by the Linux kernel at boot (UEFI mode) an I was hoping that a BIOS update may solve some of them (ACPI issues and unclaimed hardware). May be very well the Linux kernel but I can't exclude BIOS either.
On the Downloads page, under BIOS tab, there are four current BIOS versions with brief and strange description: versions 1.08, 1.09, 1.11 and 1.24
IF (and only if) I decide to update BIOS, which version should I use? What are the real differences between versions (Release Notes)? Except Windows 8 hacks, is there any real "improved system performance" on other OS? What is BIOS (5.2MB versions) vs. VBIOS (13MB update)?