Since my laptop gets quite hot and my nvidia 8 serie is dying slowy I was thinking, since I only use my laptop as a dekstop replacement anyway, of unscrewing the bottom of my laptop so the laptopcooler would have more effect.
My question is:
is this a good idea? or will my computer become polluted with dust which will make my hardware components defect?
Well my wife and I picked up an Acer 6920G. So far we like it. She wants to use it sometimes at night in bed to play WoW so I was looking for a good cooling pad for it. So what are some good ones out there?
I just replaced the T5550 cpu with a T9500 (SLAYX) in my Acer Aspire 5920. I cleaned and applied Arctic Silver 5 to the cpu and gpu. It started right up, but now it seems like the cooling fan doesn't ever shut down. When the temp. hits about 55 deg C. (according to speedfan 4.39), the fan runs at full speed. With the T5550, it would need to reach about 65 deg before running full speed, but not for long.
I have system BIOS v.1.3810
Is it possible that I did a poor job of applying the Arctic Silver 5? Any settings that
I need to change for the fan to stop continuously running?
I removed all of the unnecessary programs that Acer put in (they do make decent laptops but really overbload the OS with stupidities) and optimized Vista as much as I could (which is working nicely if i do say so myself ... but I'm still considering on going back to XP SP3 until Windows 7 comes out.).
Right ... I also played Mass Effect for a while on the laptop (maxed out at native res of 1280x800 works without a problem).
Now the only thing is, I'd like to reduce the temperatures of the laptop. The idle CPU temp is at about 52 degrees, while under load reaches about 72 degrees Celsius (which is pretty good considering the casing).
I will buy myself the ZALMAN ZM-NC2000B cooler ... but what I would also love to do is to undervolt both the CPU and the GPU.
I'm aware the RMClock is not exactly effective when it comes to P7350 cpu. I tried to undervolt it last night, and as much as I reduced the current going to the multipliers, the temperatures remained the same under stress for prolonged periods of time.
So ... until I find a way to undervolt the cpu and get myself the forementioned cooler, I'd like to undervolt the gpu (9600m GT GDDR3) If it's possible (and I know it is), I need to know of programs that can be used to acomplish this.
As much as I like my new laptop, it would be nice to further extend it's lifespan (even though it's brand new) and reduce the heat output.
I was also thinking on getting the thermal paste and applying it to cpu/gpu. Although I'm not sure I want to go ahead with it as I don't want to void the warranty.
how to overclock the cpu/gpu in question without significant gains in temps.
a have a new notebook Acer Extensa 5630g and i would like to know a good cooling pad for him. i have a cooling master notepal d1 but i can't feel no difference on the temperature i think he is too small.
I've bought my Acer Aspire 5570 with T2450 Core Duo 2.0 CPU and Intel GMA950 Video 1.5 years ago and back then I wasn't into fiddling around with it, plus I also had warranty on it and didn't feel like voiding that.
But lately it has been pissing me off, because if I actually use it for anything other than browsing text-based web pages it gets hot. And if put under max load after 10minutes you run the risk of burning your hand if you touch the laptop underneath (75C according to RMClock Utility).
But now, since warranty is long over i decided to see what I can do to improve cooling. After spending a good amount of time looking for service manual I found one on ed2k network and set it download. Eager to get the things rolling I took it apart blindly (wasn't hard at all) and of course, right when I was done with the last screw the service manual finished downloading... *sigh* (To save you from the same fate I've uploaded the service manual at the end of this post.)
I have cleaned the heatsinks (there wasn't much hair, since i used to blow it out with compressed air occasionally), reapplied thermal paste and then I noticed that about 3/4 of air vent on the bottom of the laptop (where air gets sucked in for cooling) was blocked by a piece of removable plastic, whereas the fan was big enough to use the whole vent......................
I am looking at cooling pad for my 1340. Most of them have the fan in the center (like the Belkin, with great reviews) but my laptop gets hot at the very top left above the "studioXPS" logo and power button.
To me, this means I need a 3 fan-cooler with fans at the top corners as well as the center
I want to buy a cooling pad for an XPS M1710 I just ordered but need some advice first. Some cooling pads out there blow air up to the bottom of the laptop, and others draw air from the bottom of the laptop and exhaust the hot air to the back or sides. Can somebody tell me whether the bottom of the M1710 draws cool air in, or blows hot air out? If the M1710 draws air in, then I will get a cooling pad that blows cool air to the bottom. If the bottom of the M1710 blows out hot air, then I will get a cooling pad that draws the hot air out
I have ordered Dell S XPS16 with the below configuration:
Intel Core 2 Duo T9550(2.66GHz/1066Mhz FSB/6M L2 Cache) Obsidian Black High Gloss Finish with Leather XPS 1640 4GB, DDR3, 1067 MHz 2 Dimm
16.0 inch Wide Screen 16:9 1080p FullHD RGBLED LCD W/2.0 MP ATI Mobility RADEON M96XT (this is HD 4670 right??) - 1GB 500GB 7200RPM Free Fall SensorSeagate Hard Drive Microsoft Windows Vista SP1 Ultimate 64-bit
BluRay Combo Drive Intel WiFi Link 5300 802.11AGN Half Mini Card 56 WHr 6-cell (Will order 9 cell battery later with the 100$ gift card ) Dell Wireless 370 Bluetooth Internal (2.0+Enhanced Data Rate)
I plan to use the laptop mainly for Internet browsing, watching blu ray movies, some gaming. I do not plan to do any hard core gaming (some strategy and racing games like AOE, Ceaser, NFS etc.).
Please let me know what all from the below do I need to do for the heat problem (if any):
1. Undervolting CPU
2. Get Cooling Pad (I currently have Antec, but if needed I can buy Zalman NC2000)
i've been keeping an eye on temps and was wondering which is the best bios for cooling.
at the moment my fans don't really kick in until the gpu reaches 70c. The moment the fan starts (not super loud like when you play games but louder than the normal hum) the temp drops back to 58ish very quickly (talking seconds). However, in my mind, it makes more sense to keep temps as stable as possible.
Without fans running (or at least without me noticing them running), my temps normally hang around high 50's low 60's on the gpu. However, if i am doing lots of stuff the temps slowly rise to high 60's before the fan turns on and brings it back to 58-63. I think if fans were on more often i could easily have temps in the low 50's pretty much all the time..
I think I have bios 13 at the mo.. that or 12. is there anyway to increase fan usage?
i have seen and read about cooling dock stations for the i9300 that involve removing the PCMCIA slot insert. i am curious if my notebook would benefit from leaving this slot insert out even without a cooling dock? would the extra ventilation be of any value? i am currently uninterested in buying a cooling dock.
I just got my DV3T. I noticed that the cooling pad I currently have will not work with this laptop since it sucks air from under the laptop, while the DV3T sucks the air from under the laptop and blows it out the side.
So are there any cooling pads that work well with the DV3T? Ones that blow air from the bottom to the top?
I've owned a D630 for about a year now and have noticed that the bottom of the laptop can get very hot. My dad owned the same model for a couple years and he had multiple hard drive failures. His hypothesis was that the computer might have been overheating and burned out the hard drive.
However, in doing a little research, I heard it's not so much that the computer overheats as it is that the metal frame conducts heat very easily. So while the outside might be hot, the inside isn't at a temperature that's damaging to the parts.
Any experiences with this? Any help would be appreciated. If overheating is a common problem, I'll probably shell out the money for a cooling mat. If it's not a problem, then that's money saved.!
I am waiting for my XPS to come and I want to know what is the best cooling device I can get on it. The reason I mentioned "safest" is because one person I know said sometimes it can be harmful to the laptop(I have no idea how true that is).
I have a Dell Latitude C600 that I purchased with a non working cooling fan. I bought a fan and tested it in the laptop when it was apart and it worked. I tested it again as I put it together and it worked.
Once totally together it never comes on. Is there somewhere in the BIOS where I can control it or how else can I check it?
Shouldit always be on like my other 2 laptops? Thanks for any help. Also, it is a PIII 750 MHZ C600.