My SZ-770 become extremely loud and can be used as waffle maker sometimes.
I've disassembled it and cleaned all the dust using compressed air, but it's too hot and too noisy.
I'm thinking about buying a cooling pad to partially solve the problem. But most of pads have fans on the bottom and I'm not sure that it will fix my problem.
Can anyone recommend a good pad for SZ series?
It has been just a week after getting my new laptop it has stated to thermal shutdown the base becomes too hot to touch i logged the cpu temperatures it reaches 100c but gpu is cool below 60c . this shut down happens when i play games even very light games i face this problem . i had done a clean install of windows 8.1 and i updated all my drivers and bios from the lenovo site.
View 5 Replies View RelatedHaving geforce go 7900 gs 256 Mb (17 inch, 1920x1200) died after 2 years of using it, but played only moderately. I noticed sometimes GPU was over 80 C. No more warranty, so I plan on getting a replacement.
7900 gs is 20 Watt current consumption. There are cards like 7900 GTX, FX2500M tht have 45 Watt. So roughly we could expect twice as much heat made if replaced to a 45 Watt card. Am I right here? Now, even 20 Watt card (7900 GS) was overheating with only single heat pipe. 7900 GTX or FX2500 would have to have for sure 2 heat pipes, but since we have twice as much heat, do we have the same situation?
What is your experience with 45 Watt video cards in Inspiron E1705 / 9400 ? Do they overheat (and break) as often as 20 Watt and single pipe cards?
And second question - reliability of refurbished cards or "working pulls" How long can they last? I know it all depends, how the previous owner was using it, etc. When buying used card, what possibly was overheated more? 20 Watt single pipe or 45 Watt dual pipe (like the question above)
I would appreciate any oppinion and experiences from you.
In the future, I plan to better take care of cooling, remove dust more often, use AS5 paste, fan control, use dual pipe. Anything else can be done? Maybe going to 20 Watt with 2 pipes - would probably cool down system the best.
Can any ENVY owners (any model is fine), comment on the cooling system, hardware temperatures, physical temperatures, etc.? And if anyone knows about the cooling system/features/vents for the ENVY 14.
Also, compare ENVY's gamingability to the m11x, MSI GE600 or MSI GX640, if possible.
I bought my Sony three years ago. The Model was SZ3VMP/X, 13.3 inch with Core2Duo T7400 and 2GB RAM and 120GB HDD.
Everything was ok till last year. It becames louder and louder. I cleaned Heat sink and still it was loud.
After that I found there is cooling fan, above left from the Touchpad. Last two days I can hear noises like fan is dying.
Is it possible to buy this fan somewhere, when not to open it and clean it. It looks like pretty complicate to open that part of Notebook. To remove the keyboard wasn't a problem or HDD.
I have just disasembled and cleaned, (to the best of my abilty), my SONY SZ2XP comp using compressed gas. Hopefully,
it will yield some results getting rid of all the dust, although i did feel like i could have done better if i managed to disassemble it further to reach all affected areas.
I'll continue to my question though, I unscrewed the heatsink and noticed that the thermal paste on the cpu looked really misapplied.
It has some big lumps of paste and seems very unevenly applied. I have owned this computer for about 2 years or so, and i have never disassembled it until now
I was thinking of making my own notebook cooler, one with a fan directly over the air intake.
I was wondering if too much air going into the intake will spoil the fan inside, kinda like the air is moving faster than the internal fan can handle.
I am looking at cooling pad for my 1340. Most of them have the fan in the center (like the Belkin, with great reviews) but my laptop gets hot at the very top left above the "studioXPS" logo and power button.
To me, this means I need a 3 fan-cooler with fans at the top corners as well as the center
Anyone know which is the best cooling pad to use with the XPS 13?
View 7 Replies View RelatedSince my laptop gets quite hot and my nvidia 8 serie is dying slowy I was thinking, since I only use my laptop as a dekstop replacement anyway, of unscrewing the bottom of my laptop so the laptopcooler would have more effect.
My question is:
is this a good idea? or will my computer become polluted with dust which will make my hardware components defect?
I take back what I said about this not getting as hot as my 1720. It most certainly runs hotters, especially under a medium to heavy load.
What steps have those of you with a 16 started taking to reduce your temperature? Anyone done any neat heatsink mods, replaced fans, found a program to control the fans, any of that?
Happy to hear any and all input, I love the Studio XPS 16 so far but it does get mighty toasty...and for the record, the warm touchpad area doesn't really bother me, but the underside does.
I want to buy a cooling pad for an XPS M1710 I just ordered but need some advice first. Some cooling pads out there blow air up to the bottom of the laptop, and others draw air from the bottom of the laptop and exhaust the hot air to the back or sides. Can somebody tell me whether the bottom of the M1710 draws cool air in, or blows hot air out? If the M1710 draws air in, then I will get a cooling pad that blows cool air to the bottom. If the bottom of the M1710 blows out hot air, then I will get a cooling pad that draws the hot air out
View 9 Replies View RelatedI have ordered Dell S XPS16 with the below configuration:
Intel Core 2 Duo T9550(2.66GHz/1066Mhz FSB/6M L2 Cache)
Obsidian Black High Gloss Finish with Leather XPS 1640
4GB, DDR3, 1067 MHz 2 Dimm
16.0 inch Wide Screen 16:9 1080p FullHD RGBLED LCD W/2.0 MP
ATI Mobility RADEON M96XT (this is HD 4670 right??) - 1GB
500GB 7200RPM Free Fall SensorSeagate Hard Drive
Microsoft Windows Vista SP1 Ultimate 64-bit
BluRay Combo Drive
Intel WiFi Link 5300 802.11AGN Half Mini Card
56 WHr 6-cell (Will order 9 cell battery later with the 100$ gift card )
Dell Wireless 370 Bluetooth Internal (2.0+Enhanced Data Rate)
I plan to use the laptop mainly for Internet browsing, watching blu ray movies, some gaming. I do not plan to do any hard core gaming (some strategy and racing games like AOE, Ceaser, NFS etc.).
Please let me know what all from the below do I need to do for the heat problem (if any):
1. Undervolting CPU
2. Get Cooling Pad (I currently have Antec, but if needed I can buy Zalman NC2000)
3. Replace thermal compound .....
I'm gonna purchase a cooler for my Studio 17 before it comes in. My question is, are the fans on the bottom of the laptop an intake or exhaust?
View 10 Replies View RelatedI'm now very happy owner of a cooling pad with fans. My temps are :
CPU : 29 degrees
GPU : 40 degrees
HDD : 27 degrees
Got a m1530 and, so far, it is fantastic.
i've been keeping an eye on temps and was wondering which is the best bios for cooling.
at the moment my fans don't really kick in until the gpu reaches 70c. The moment the fan starts (not super loud like when you play games but louder than the normal hum) the temp drops back to 58ish very quickly (talking seconds). However, in my mind, it makes more sense to keep temps as stable as possible.
Without fans running (or at least without me noticing them running), my temps normally hang around high 50's low 60's on the gpu. However, if i am doing lots of stuff the temps slowly rise to high 60's before the fan turns on and brings it back to 58-63. I think if fans were on more often i could easily have temps in the low 50's pretty much all the time..
I think I have bios 13 at the mo.. that or 12. is there anyway to increase fan usage?
i have seen and read about cooling dock stations for the i9300 that involve removing the PCMCIA slot insert. i am curious if my notebook would benefit from leaving this slot insert out even without a cooling dock? would the extra ventilation be of any value? i am currently uninterested in buying a cooling dock.
View 10 Replies View RelatedWell my wife and I picked up an Acer 6920G. So far we like it. She wants to use it sometimes at night in bed to play WoW so I was looking for a good cooling pad for it. So what are some good ones out there?
View 10 Replies View Relatedmy laptop runs extraordinarily hot (I believe it was a faulty fan/heatsink assembly.) So I purchased a replacement, opened up the laptop and replaced it.
Now I get underload temps Up to 94C on GPU (and around 80 on CPU -
despite the fact that it can only use 3 of its 4 gigs of RAM, I still love my new DV5.
There's only one, tiny kink...
It's getting hot. Very hot. My hands aren't burning, but I can feel the heat in my palms.
Speedfan readings:
Core 0: Average temperature's around 47C
Core 1: Avg. Temp. is 49C
GPU: Here's the real problem. IT'S ON FREAKING 54C!!!
These temperatures are bloody DANGEROUS. And I'm going to be using this for gaming.
I just got my DV3T. I noticed that the cooling pad I currently have will not work with this laptop since it sucks air from under the laptop, while the DV3T sucks the air from under the laptop and blows it out the side.
So are there any cooling pads that work well with the DV3T? Ones that blow air from the bottom to the top?
I've owned a D630 for about a year now and have noticed that the bottom of the laptop can get very hot. My dad owned the same model for a couple years and he had multiple hard drive failures. His hypothesis was that the computer might have been overheating and burned out the hard drive.
However, in doing a little research, I heard it's not so much that the computer overheats as it is that the metal frame conducts heat very easily. So while the outside might be hot, the inside isn't at a temperature that's damaging to the parts.
Any experiences with this? Any help would be appreciated. If overheating is a common problem, I'll probably shell out the money for a cooling mat. If it's not a problem, then that's money saved.!
I'm thinking of buying a SXPS 13, but I read that it is very warm compared to other 13" laptops, and it is not really pleasant for a "lap" usage.
Did any of you try advanced methods to improve the cooling system, such as adding a thermal compound, replacing the fan, changing the voltage in the BIOS?
Did it work? Did it avoid the warranty?
I also have one unrelated question, but I don't want to create a new topic for this: Does the display port allow us to use a Dual Screen?
I am waiting for my XPS to come and I want to know what is the best cooling device I can get on it. The reason I mentioned "safest" is because one person I know said sometimes it can be harmful to the laptop(I have no idea how true that is).
View 9 Replies View RelatedI like my M6400. Except that I am sick of the noise the fans make.
My M6300 runs at hotter temperatures without the fans almost ever kicking in for light applications. As a result it is a pleasant quite piece of kit to work with.
The M6400 is loud and annoying in the continuous on-off cycles. Notebook coolers with fans do not work well in my experience .....
if there are any DIY mods to enable better vid card cooling.
i googled and am aware of "cooling pad" to put under the laptop, but its not a portable solution
i am looking for something along the lines of cut bigger vents / more vents or even a fan? or put in more efficient heat sink in there...
I'm not sure what is going on, but I think my cooling fan may have broke inside my m1530.
A couple months ago, I was having many heating issues that I diagnosed as just the poor thermal pad application from the factory. So I undervolted my CPU and applied arctic silver 5 to the heatsink.
Everything was well at first, but in the past few weeks my comp has started running really hot again.
It will idle around 45-50 C, which is pretty good and much better than before the thermal pad change. However, under load (especially graphical) the temps go up to 90 again now.
I have a Dell Latitude C600 that I purchased with a non working cooling fan. I bought a fan and tested it in the laptop when it was apart and it worked. I tested it again as I put it together and it worked.
Once totally together it never comes on. Is there somewhere in the BIOS where I can control it or how else can I check it?
Shouldit always be on like my other 2 laptops? Thanks for any help. Also, it is a PIII 750 MHZ C600.
I'm curious if anyone knows of a higher capacity fan or fans for the gpu and cpu heatsinks in an I9300/xps2.. I got to wondering if there are same size fans which move more air, maybe they spin faster, higher RPMs.. Also, would cutting slots or a hole in the left side of the cpu/gpu heatsink fan help or harm that side..? Anyone played with this, or experimented? My 7800gtx GPU idles at near 60degrees when fan control is set to auto..
View 10 Replies View Relatedby what i read about the critical heating in the sxps16, i see that the problem is caused by the SB..
So.. anyone tried to cooling that component? Only with cooling pad? can't do a heatsink maybe linked to the heatpipe?