Sony :: Replacing CPU Cooling Paste
Apr 9, 2009
I have just disasembled and cleaned, (to the best of my abilty), my SONY SZ2XP comp using compressed gas. Hopefully,
it will yield some results getting rid of all the dust, although i did feel like i could have done better if i managed to disassemble it further to reach all affected areas.
I'll continue to my question though, I unscrewed the heatsink and noticed that the thermal paste on the cpu looked really misapplied.
It has some big lumps of paste and seems very unevenly applied. I have owned this computer for about 2 years or so, and i have never disassembled it until now
View 5 Replies
ADVERTISEMENT
Jan 23, 2010
Does anyone know how to apply thermal paste to the Sony TZ series? I've opened it up and not really sure where the CPU/heatsink is. Looks complicated to further disassemble the thing
View 3 Replies
View Related
Aug 20, 2009
I'd like to replace the fan in my laptop (Dell's Latitude d830) with a faster/better one. From what I've seen, most people seem to think that this is impossible.
I, however, find this hard to believe that Dell would have included the only possible fan that's compatible with this laptop, or that this particular fan is the best possible cooling option.
Why is it so hard to upgrade in the first place? I'm sure it can be done, I've opened up my laptop a few times in the past and it's not exactly rocket science .....
View 10 Replies
View Related
Jan 25, 2009
Taking apart my Vaio Z was easier that I thought. Changed to Artic Silver 5, temperature came down 2 degrees.
View 6 Replies
View Related
May 23, 2010
I bought my Sony three years ago. The Model was SZ3VMP/X, 13.3 inch with Core2Duo T7400 and 2GB RAM and 120GB HDD.
Everything was ok till last year. It becames louder and louder. I cleaned Heat sink and still it was loud.
After that I found there is cooling fan, above left from the Touchpad. Last two days I can hear noises like fan is dying.
Is it possible to buy this fan somewhere, when not to open it and clean it. It looks like pretty complicate to open that part of Notebook. To remove the keyboard wasn't a problem or HDD.
View 4 Replies
View Related
Oct 28, 2009
My SZ-770 become extremely loud and can be used as waffle maker sometimes.
I've disassembled it and cleaned all the dust using compressed air, but it's too hot and too noisy.
I'm thinking about buying a cooling pad to partially solve the problem. But most of pads have fans on the bottom and I'm not sure that it will fix my problem.
Can anyone recommend a good pad for SZ series?
View 8 Replies
View Related
Oct 26, 2009
I have just upgraded my old Sony Vaio VGN SZ370P to WIN 7 and I am very happy with it.
The computer still performs beautifully. However, I know that as a laptop its end is near (Three years and hundreds of thousands of miles.)
It is already running very hot, though that does not seem to be affecting it at this point.
My question is simple, I have noticed that the SZ line seems to have disappeared. It looks like it has been replaced by the Z line
View 10 Replies
View Related
Apr 30, 2010
I'm about to order a Sony Z but want to use my own SSDs (Intel X25-M 160GB x 2). I checked out the manual
on the Sony website but there is nothing about upgrading/swapping out the hard drives.
Is this possible to do and how
View 3 Replies
View Related
Apr 30, 2009
I have a Vaio VGN-SZ61WN and I would live to get the HDD replaced with the one I've just bought. Thing is, it doesn't look too straight forward to me. The HDD is situated on the bottom left of the notebook when looking at the keyboard. There isn't a way in from the back. Just thought I'd ask before I destroy my notebook
View 3 Replies
View Related
Apr 5, 2010
I have the new Z model VPCZ117GG..and unfortunately for my region it didn't come with a Bluray drive and I had no choice of customization as well..
My version is the one with the Full HD screen,256GB SSD and 8GB Ram.
I'm wondering if it's possible to replace the DVD drive with a bluray drive. I know this will void warranty, but i'll be doing it after my warranty expire
View 10 Replies
View Related
Apr 17, 2009
I have ruined the C key.
Can anyone tell me if I can just replace the one key OR must I replace the WHOLE keyboard and if so, what sort of cost might I be looking at?
View 4 Replies
View Related
May 9, 2010
I am a frequent traveller who needs a reliable and ultra-portable notebook. I have owned a Sony Vaio VGN-TZ37 for almost 18 months. While I like it very much, it is very slow to boot up (XP). For that reason, I decided to replace the notorious in-built HDD with a SDD.
I have succeeded in replacing the original one with a Photofast G-Monster 1.8” ZIF SSD V 4 and am very happy with the result. The following is my experience.
When I decided to change to SSD, I did a lot of internet search and finally took 3 key decisions:
(1)Which SDD? – After a lot of search, I settled for G-Monster 1.8” ZIF SSD V 4. It is not the least expensive, but I am happy with the results.
(2)DIY? – A few repair shops could provide the service but they could not assure compatibility or system installation.
I decided to do it myself which is a good decision because I had to re-open the case 3 times.
(3)Secret of opening the case – There are a few weblinks offer pictures and tips on the internet. They are essential for non-technical people like me .....
View 7 Replies
View Related
Jul 16, 2009
My power plug on my laptop finally gave out. I cant find any articles on taking a VGN-AW series laptop apart. This is my second AW series which is a VGN-AW120J. I know theirs 2 different plugs for them. The on I have doesn't have a enclosure inside the plug and has 2 prongs that touch the pin in the power adapter.
View 8 Replies
View Related
Jan 30, 2009
I'm about to pull the trigger on a FW, but it has a 320GB 4200rpm. HD.
I've planned on buying a WD Scorpio Black later and the replacing it.
How complicated would that be? What I mean is, that I can do the hardware replacing and all that, but is it enough that I would do a recovery disc with the original HD inside and then replace the HD's and then just boot from the disc. Or do I need to fiddle around with the SATA drivers,
View 9 Replies
View Related
Dec 13, 2009
Just received a z590 that I want to repalce the 5400rpm HD with a faster one.
I did a search, but all the links no longer work.
Looking specifically for directions on how to remove the keyboard to get to the hardddrive (e.g. what screws or tabs to pop open)
View 3 Replies
View Related
Aug 6, 2009
I'm currently thinking of buying a Sony SR series laptop, but unfortunately here in Sweden we only get two configurations:
Vaio SR49 - P8800, Radeon 3470 256MB
Vaio SR41 - T6400, Radeon 4750 512MB
Since I would like P8800+Radeon 4750, the only possible way seems to get a SR41 and upgrade the cpu. Has anyone here got any experience on upgrading a laptop CPU? More specifically, upgrading from a T-series to a P-series.
I guess they use the same motherboards, so I can't imagine it would be incompatible, but I'm wondering whether it requires any BIOS changes which would be hard to do in a laptop bios.
View 3 Replies
View Related
Oct 27, 2009
I think I need to replace my 4965AGN on my SZ71WN/C as my laptop will loose connectivity with my router for no reason. I get the dreaded unidentified error and the only way to resolve the issue is to reboot my laptop. This was happening even before I upgraded to Win7. Even on a vanialla Win7 install, with no antivirus, it happens. You could ask if it's my router (Netgear DG834GT), but another Vaio SZ that I have works fine....
So has anyone changed their WIFI module and if so, should I upgrade to one which is WIN7 compatiable out of the box?
View 10 Replies
View Related
Apr 22, 2009
I just had the motherboard/video card on my m1530 replaced by the dell guy because of the old defective graphics card issue. I watched him do the whole thing, and when he re-attached cooling mechanism to the motherboard, he used new thermal paste for the cpu, but not the video card.
I asked him about this, and he said that the surface of the gpu is different and doesn't need it. I don't really believe this, since it looks just like the desktop gpus that I always use thermal paste on. I'm getting pretty high temps now (65-70C idle).
View 4 Replies
View Related
Jul 25, 2009
I bought THIS from dealextreme.
I want to use it when Im gonna be replacing the heatsink
View 4 Replies
View Related
Apr 5, 2008
Alright, my CPU is idling at 75c and my GPU is at 80c, I've opened up my M170 and It didnt seem dusty at all, so I went out and bought a small tube of AC5 which people say will help.
Now the problem Is I have no idea where to apply it, or how much is needed. I dont really know anything about hardware components, so If anyone has any pics which could show me where and how much to apply that would great.
The M170 is currently in peices at my desk and Im typing this on a MacBook, and I really dont want to spend anymore time on the OSX than I have to.
View 10 Replies
View Related
Apr 22, 2009
Well i finally decided that i should give this a try after seeing my temps creep up by about 1 degreeC per week. I just ordered some Arctic Silver 5. Ive looked at all the thermal paste topics here and still have a few questions. Firstly, what exactly is the thermal pad and do i have to worry about it? I saw that some people had to remove the pad but when i read through
http://www.robertbromfield.com/Tutor...he%20M1530.pdf tutorial i didnt see anything about taking off or replacing a thermal pad.
Secondly, when applying the thermal paste, do i want to cover the whole "black square" of the cpu/gpu with a thin layer?
And lastly, i heard that this may void your warranty. I was wondering, if i did break my lappy somehow, couldnt i just clean it off so that when the tech guy comes i just claim that i never even opened it up?
View 10 Replies
View Related
May 20, 2010
I already undervolted my computer which did help, but the fan is so weak now that I feel i need to do everything possible to keep it from overheating. Does anybody have an extensive guide on applying thermal paste?
I really need to do this. I am pretty noob at computer hardware, So i would need a guide that would even tell me how to take apart my entire case/etc... I am sorta running out of options.
View 10 Replies
View Related
Feb 21, 2009
it's been one year and a 2 months i've had my MBP.
I am thinking about redoing all the thermal paste, once i get my new 320GB hard drive.
Should i do that? Or no?
I would be using artic silver 5
View 8 Replies
View Related
Mar 10, 2010
My temps are starting to creep up and I suspect the thermal paste is the culprit. I'm looking to replace it. If anyone has done it before. My question is, does the Vostro use a thermal pad or just a heatsink on on top of the CPU?
I checked the service manual and it made no mention of a thermal pad. Just looking to make sure before I tear it down.
View 10 Replies
View Related
Jul 20, 2009
I just got my second 1545 and and it runs a good 10 degrees C' hotter than the first. I saw it hit 70 degree spike with real temp just idling.
Quick edit: just checked the heatsink and the screws weren't tightened down.
View 4 Replies
View Related
Dec 2, 2008
I was thinking of changing my thermal paste on my CPU and GPU chipset, many ppl out there saying this would void the warranty and hell yeah it will, but the question is, will DELL engineer would be able to differentiate between stock silicone paste and new thermal paste (for my case is Coolermaster Nanofusion), anyone ever get busted by modding XPS?
Unless you change the obvious purple/pink thermal pad at the ACPI chipset to copper sheet then it's a totally different story.
View 10 Replies
View Related
Jul 21, 2009
So ive been dabbling with the thermal paste on my m1530 for a few months now but havent really stressed the gpu to know for sure. Today however, while playing l4d, my gpu temp got up to 88 degrees C and my cpu was in the high 70s.
I havent seen these kinds of temps since i got my mobo/heatsink replaced a year ago. I have opened up my laptop and my fan looks a little dusty but i am not sure if that would warrant a 88 degree gpu temp.
I am wondering if this could be because i applied the paste incorrectly? I am quite sure i did it right and i followed the instructions that were posted on here for m1530s exactly.
View 7 Replies
View Related
Oct 8, 2014
I have cleaned my Aspire 5750 as it had accumulated dust over last 3years, I stripped down, clean the fan, re-pasted the CPU and put everything back carefully, when I switched it on, the fan spins for a while and turns off, battery gets charged( changing from orange to blue) but only black screen.
I have checked the connections, changed CMOS battery, tried pressing Power button without battery and mains for 20 secs.
View 3 Replies
View Related
Aug 26, 2009
Replacing Dell's default thermal paste in the Dell Studio XPS 1340 can lower your cpu, gpu and ambient temperatures by as much as 15C/60F.
When I first received my SXPS 1340 from Dell, my temperatures were:
THRM-57C, CPU-52C, GPU-62C.
For me, these temperatures were O.K., but I knew I could lower them by replacing the thermal paste.
My temperatures after replacing the thermal paste were:
THRM-48C, CPU-34C, GPU-50C. Note that after a month or two of having the MX-2 inside your computer, the cooler it will become as it settles
View 10 Replies
View Related
Jun 4, 2009
I just got my 1st macbook and was trying to burn win 7 iso file in my macbook.
1st problem, it wont let me copy and drag/paste the files from the usb, said that i do not have enough access/permission.....then the copying thingy hangs, will not close until i forcequit the finder. Then all the files in the usb flashdisk disappeared....could not be seen...cant eject it eitherhad to unplug it without ejecting .
I tried burning with my brother's old macbook (tiger) everything was a breeze, no prob except the dvd was not able to be read when i try to boot with bootcamp....
I have tried repairing permission with disk utility but that didnt work either.
View 3 Replies
View Related
