I just got my second 1545 and and it runs a good 10 degrees C' hotter than the first. I saw it hit 70 degree spike with real temp just idling.
Quick edit: just checked the heatsink and the screws weren't tightened down.
I was thinking of changing my thermal paste on my CPU and GPU chipset, many ppl out there saying this would void the warranty and hell yeah it will, but the question is, will DELL engineer would be able to differentiate between stock silicone paste and new thermal paste (for my case is Coolermaster Nanofusion), anyone ever get busted by modding XPS?
Unless you change the obvious purple/pink thermal pad at the ACPI chipset to copper sheet then it's a totally different story.
I have come to grips with the fact that my E6400 (see specs below) has idle temps of around 42 for both CPUs and around 62 for the GPU (while docked).
While these are not dangerous, and while the slow fan speed is very quiet and therefore doesn't bother me, I refuse to accept defeat so easily.
So, I am thinking of replacing the thermal paste and possibly the thermal pad on my E6400. There is at least one person here at the Latitude/Precision sub-forum who did that, with amazing results
i have a question for everyone who has removed the heatspreader from an acer 6920g. Did the northbridge made contact with the heatspreader by a thermal pad or by a thermal paste ? mine had something that looked like a thermal pad but when i tried to remove it , it tore into small pieces ( i know a thermal pad is not like that ). i used a thermal paste when i put everything back together. Should i open it up again and use a thermal pad for the northbridge ?. In everst in the sensor menu it shows 42 degrees celsius for the motherboard sensor ( i assume that is the northbridge).
View 10 Replies View RelatedI just had the motherboard/video card on my m1530 replaced by the dell guy because of the old defective graphics card issue. I watched him do the whole thing, and when he re-attached cooling mechanism to the motherboard, he used new thermal paste for the cpu, but not the video card.
I asked him about this, and he said that the surface of the gpu is different and doesn't need it. I don't really believe this, since it looks just like the desktop gpus that I always use thermal paste on. I'm getting pretty high temps now (65-70C idle).
I bought THIS from dealextreme.
I want to use it when Im gonna be replacing the heatsink
Alright, my CPU is idling at 75c and my GPU is at 80c, I've opened up my M170 and It didnt seem dusty at all, so I went out and bought a small tube of AC5 which people say will help.
Now the problem Is I have no idea where to apply it, or how much is needed. I dont really know anything about hardware components, so If anyone has any pics which could show me where and how much to apply that would great.
The M170 is currently in peices at my desk and Im typing this on a MacBook, and I really dont want to spend anymore time on the OSX than I have to.
Well i finally decided that i should give this a try after seeing my temps creep up by about 1 degreeC per week. I just ordered some Arctic Silver 5. Ive looked at all the thermal paste topics here and still have a few questions. Firstly, what exactly is the thermal pad and do i have to worry about it? I saw that some people had to remove the pad but when i read through
http://www.robertbromfield.com/Tutor...he%20M1530.pdf tutorial i didnt see anything about taking off or replacing a thermal pad.
Secondly, when applying the thermal paste, do i want to cover the whole "black square" of the cpu/gpu with a thin layer?
And lastly, i heard that this may void your warranty. I was wondering, if i did break my lappy somehow, couldnt i just clean it off so that when the tech guy comes i just claim that i never even opened it up?
I already undervolted my computer which did help, but the fan is so weak now that I feel i need to do everything possible to keep it from overheating. Does anybody have an extensive guide on applying thermal paste?
I really need to do this. I am pretty noob at computer hardware, So i would need a guide that would even tell me how to take apart my entire case/etc... I am sorta running out of options.
My temps are starting to creep up and I suspect the thermal paste is the culprit. I'm looking to replace it. If anyone has done it before. My question is, does the Vostro use a thermal pad or just a heatsink on on top of the CPU?
I checked the service manual and it made no mention of a thermal pad. Just looking to make sure before I tear it down.
So ive been dabbling with the thermal paste on my m1530 for a few months now but havent really stressed the gpu to know for sure. Today however, while playing l4d, my gpu temp got up to 88 degrees C and my cpu was in the high 70s.
I havent seen these kinds of temps since i got my mobo/heatsink replaced a year ago. I have opened up my laptop and my fan looks a little dusty but i am not sure if that would warrant a 88 degree gpu temp.
I am wondering if this could be because i applied the paste incorrectly? I am quite sure i did it right and i followed the instructions that were posted on here for m1530s exactly.
1) Will changing the processor on a dell xps 1330 void the warranty? Just checking, by mobo is fried, and they're coming out to replace it.
Just want to make sure that I didn't screw myself by upgrading the processor (processor had nothing to do with it, upgraded over six months ago).
2) dell told me that there is a "known problem" with Nvidia cards frying the dell.
Replacing Dell's default thermal paste in the Dell Studio XPS 1340 can lower your cpu, gpu and ambient temperatures by as much as 15C/60F.
When I first received my SXPS 1340 from Dell, my temperatures were:
THRM-57C, CPU-52C, GPU-62C.
For me, these temperatures were O.K., but I knew I could lower them by replacing the thermal paste.
My temperatures after replacing the thermal paste were:
THRM-48C, CPU-34C, GPU-50C. Note that after a month or two of having the MX-2 inside your computer, the cooler it will become as it settles
Taking apart my Vaio Z was easier that I thought. Changed to Artic Silver 5, temperature came down 2 degrees.
View 6 Replies View Relatedit's been one year and a 2 months i've had my MBP.
I am thinking about redoing all the thermal paste, once i get my new 320GB hard drive.
Should i do that? Or no?
I would be using artic silver 5
I am planning on buying a Studio XPS 1640 when the prices come down, hopefully run a little cooler temp wise, and maybe a different vid card option (doubtful) later this year.
I was browsing Gizmodo.com today and they had an article about someone who laser etched the world maps from Super Mario Land for the Gameboy on their Eee PC. I thought that was very cool! I was wondering about doing that to a laptop when I buy a new one, to personalize it and make it my own.
I have found a website that does it, Etchstar.com and I saw a few designs that I found interesting. I was wondering if this would void my warranty if I bought a Studio XPS 1640 like I am planning. I personally don't think it would, since it would be cosmetic and wouldn't damage the lid of the LCD screen. Any thoughts?
Also, can anyone recommend a specific site that lets me upload my own image to have it etched on the laptop? Or maybe an actual store that I can bring it to?
I have an M1330 with 2 years completecare left.
Would I lose my warranty if i open the laptop and add a 3rd antenna behind the LCD?
I have an LED screen so I only got two antennas!
I replaced the thermal paste of the CPU and the GPU with "Coollaboratory liquid pro". And I replaced the thermal pad of the northbridge with "Arctic Silver 5" thermal paste.
Here are my sesults (in a 20 degrees Clesius enviroment, T9600, 2,8GHz, stock voltage):
73 dregrees Celsius at 100% load
(instead of 92)
39 dregrees Celsius at 0% load (fan off)
(instead of 45)
According to my research and different experiments this combination is my actual optimum.
The cooler and more silent system supports my usage of voice recognition (using the internal mic).
Of cause later the voltage could be reduced using rmclock.....
Due to popular demand of people requesting a guide on how to change their thermal paste I decided to make a video guide for the community as a way of giving back. Enjoy and sorry if I'm no high quality youtube blogger. This is my first video ever.
Changing Studio XPS 1645 Thermal Paste(AS5) from XmDXtReMeK on Vimeo.
You need isopropyl alcohol(99% or high purity)/arctic clean solution would work too with Q-Tips to clean up the previous compound. So please have that handy guys.
Also watch this video on why I will not spread the compound but put a pea size dab of the compound and let the pressure spread it. You do not want air pockets between your cpu and heatsink, it will cause a lose of the thermal interface and wont work optimal.
http://www.youtube.com/watch?v=EyXLu1Ms-q4 .....
Does anyone know how to apply thermal paste to the Sony TZ series? I've opened it up and not really sure where the CPU/heatsink is. Looks complicated to further disassemble the thing
View 3 Replies View RelatedDoes upgrading the HDD void the warranty? How easy is it to upgrade?
View 3 Replies View RelatedMy notebook, Acer 5755G is after warranty and it's overheating. I have to clean a cooling system and change thermal paste. On the Internet I found few guides, but there people are dissembling this notebook almost completely... Do I have to do it or can I just remove a back cover to get access to cooling system?
View 5 Replies View RelatedI've been forgetting my curiosity about this thing, but it was just now that I remembered--what does the system actually do, aside from the strategically placed rubber stoppers beneath the laptop body?
also concerning the HDD. I don't know about you guys, but I have a "warranty void if removed" sticker over one of two screw holes in the HDD compartment..will that really void the warranty if ever it got ruined? I'm in the hopes of upgrading my hard drive..
the acer driver i dwnloaded from acer europe still freezes and acer is to lazy to fix that i guess im going to get my drivers from laptop2go, but do they void your warrenty like dox's?
View 6 Replies View RelatedI decide to reapply thermal paste and took couple of pictures to show how to do it and what kind of parts you need to remove.
First you need to download service manual and read it. All the instructions are there for how to dissemble the notebook. Following pictures might help you to understand service manual.
Things you need to unplug before remove the top panel
Things you need to unplug/unscrew before remove heatsinks
Here's the CPU picture without heatsink
Cleaned CPU heatsink
GPU picture without heatsink
Cleaned GPU heatsink
I use white cotton cloth and alcohol to clean the CPU/GPU and heatsink(s) and use AS5 as a thermal paste. CPU/GPU temp drop nearly 4C-5C. I need to wait until AS5 settle down.
I'm expecting another 2C drop after that.
Just as the title states. Dell has not given me a straight answer. When I asked in their support they said and I quote.
"We do offer upgrade packages, for windows 7 if you would like to do that it is very easy to do. I can help you with that now"
However He didn't answer my question after asking twice he gave me similar replies.
I have Hardware warranty and currently my pc is having a few hardware issues.
Would It void my warranty if I send it in with windows 7?
I know HP will tell you that it does. But if I had a problem with my computer and had to send it in to be fixed, if I switched it back to the OEM keyboard before sending it in, would they have anyway of knowing that I've been tickering with the keyboard?
Hopefully once people confirm that the HDX 18 aftermarket keyboard will work on the DV8, I'll jump the gun and order one. I really want a backlit keyboard.
Bought an HP Pavilion DV7-2170US a few weeks ago. I plan on doing a couple things to it and am wondering how this would affect the HP warranty:
1) Leaving Vista SP1 on it's own partition and installing the HP Windows 7 upgrade on it's own partition to see which I like better?
2) Going to rid the computer of the needless HP and others bloatware, but have read back and forth whether this will nullify the warranty if I have to send it back to HP?
I just recently placed an order for a Studio 1737 (replacing an Inspiron E1705). It comes with a 1 year warranty.
I'm debating whether it's worth spending $200+ to upgrade to a Dell 3 year warranty or should I get a 3 year Square Trade Warranty for less than $150 (I can get one for around $120 after a coupon)?
upgraded HD on the Z - it was a relatively short thread without any concensus.
Does anyone know definitely if upgrading the HD myself void the warranty - IF I do not damage anything?