Well i finally decided that i should give this a try after seeing my temps creep up by about 1 degreeC per week. I just ordered some Arctic Silver 5. Ive looked at all the thermal paste topics here and still have a few questions. Firstly, what exactly is the thermal pad and do i have to worry about it? I saw that some people had to remove the pad but when i read through
http://www.robertbromfield.com/Tutor...he%20M1530.pdf tutorial i didnt see anything about taking off or replacing a thermal pad. Secondly, when applying the thermal paste, do i want to cover the whole "black square" of the cpu/gpu with a thin layer?
And lastly, i heard that this may void your warranty. I was wondering, if i did break my lappy somehow, couldnt i just clean it off so that when the tech guy comes i just claim that i never even opened it up?
I was thinking of changing my thermal paste on my CPU and GPU chipset, many ppl out there saying this would void the warranty and hell yeah it will, but the question is, will DELL engineer would be able to differentiate between stock silicone paste and new thermal paste (for my case is Coolermaster Nanofusion), anyone ever get busted by modding XPS?
Unless you change the obvious purple/pink thermal pad at the ACPI chipset to copper sheet then it's a totally different story.
My notebook, Acer 5755G is after warranty and it's overheating. I have to clean a cooling system and change thermal paste. On the Internet I found few guides, but there people are dissembling this notebook almost completely... Do I have to do it or can I just remove a back cover to get access to cooling system?
Due to popular demand of people requesting a guide on how to change their thermal paste I decided to make a video guide for the community as a way of giving back. Enjoy and sorry if I'm no high quality youtube blogger. This is my first video ever.
Changing Studio XPS 1645 Thermal Paste(AS5) from XmDXtReMeK on Vimeo.
You need isopropyl alcohol(99% or high purity)/arctic clean solution would work too with Q-Tips to clean up the previous compound. So please have that handy guys.
Also watch this video on why I will not spread the compound but put a pea size dab of the compound and let the pressure spread it. You do not want air pockets between your cpu and heatsink, it will cause a lose of the thermal interface and wont work optimal. http://www.youtube.com/watch?v=EyXLu1Ms-q4 .....
i have a question for everyone who has removed the heatspreader from an acer 6920g. Did the northbridge made contact with the heatspreader by a thermal pad or by a thermal paste ? mine had something that looked like a thermal pad but when i tried to remove it , it tore into small pieces ( i know a thermal pad is not like that ). i used a thermal paste when i put everything back together. Should i open it up again and use a thermal pad for the northbridge ?. In everst in the sensor menu it shows 42 degrees celsius for the motherboard sensor ( i assume that is the northbridge).
I just had the motherboard/video card on my m1530 replaced by the dell guy because of the old defective graphics card issue. I watched him do the whole thing, and when he re-attached cooling mechanism to the motherboard, he used new thermal paste for the cpu, but not the video card.
I asked him about this, and he said that the surface of the gpu is different and doesn't need it. I don't really believe this, since it looks just like the desktop gpus that I always use thermal paste on. I'm getting pretty high temps now (65-70C idle).
Alright, my CPU is idling at 75c and my GPU is at 80c, I've opened up my M170 and It didnt seem dusty at all, so I went out and bought a small tube of AC5 which people say will help.
Now the problem Is I have no idea where to apply it, or how much is needed. I dont really know anything about hardware components, so If anyone has any pics which could show me where and how much to apply that would great.
The M170 is currently in peices at my desk and Im typing this on a MacBook, and I really dont want to spend anymore time on the OSX than I have to.
I already undervolted my computer which did help, but the fan is so weak now that I feel i need to do everything possible to keep it from overheating. Does anybody have an extensive guide on applying thermal paste?
I really need to do this. I am pretty noob at computer hardware, So i would need a guide that would even tell me how to take apart my entire case/etc... I am sorta running out of options.
My temps are starting to creep up and I suspect the thermal paste is the culprit. I'm looking to replace it. If anyone has done it before. My question is, does the Vostro use a thermal pad or just a heatsink on on top of the CPU?
I checked the service manual and it made no mention of a thermal pad. Just looking to make sure before I tear it down.
So ive been dabbling with the thermal paste on my m1530 for a few months now but havent really stressed the gpu to know for sure. Today however, while playing l4d, my gpu temp got up to 88 degrees C and my cpu was in the high 70s.
I havent seen these kinds of temps since i got my mobo/heatsink replaced a year ago. I have opened up my laptop and my fan looks a little dusty but i am not sure if that would warrant a 88 degree gpu temp.
I am wondering if this could be because i applied the paste incorrectly? I am quite sure i did it right and i followed the instructions that were posted on here for m1530s exactly.
I replaced the thermal paste of the CPU and the GPU with "Coollaboratory liquid pro". And I replaced the thermal pad of the northbridge with "Arctic Silver 5" thermal paste.
Here are my sesults (in a 20 degrees Clesius enviroment, T9600, 2,8GHz, stock voltage): 73 dregrees Celsius at 100% load (instead of 92) 39 dregrees Celsius at 0% load (fan off) (instead of 45)
According to my research and different experiments this combination is my actual optimum. The cooler and more silent system supports my usage of voice recognition (using the internal mic). Of cause later the voltage could be reduced using rmclock.....
Trying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
I have cleaned my Aspire 5750 as it had accumulated dust over last 3years, I stripped down, clean the fan, re-pasted the CPU and put everything back carefully, when I switched it on, the fan spins for a while and turns off, battery gets charged( changing from orange to blue) but only black screen.
I have checked the connections, changed CMOS battery, tried pressing Power button without battery and mains for 20 secs.
I just got my 1st macbook and was trying to burn win 7 iso file in my macbook.
1st problem, it wont let me copy and drag/paste the files from the usb, said that i do not have enough access/permission.....then the copying thingy hangs, will not close until i forcequit the finder. Then all the files in the usb flashdisk disappeared....could not be seen...cant eject it eitherhad to unplug it without ejecting .
I tried burning with my brother's old macbook (tiger) everything was a breeze, no prob except the dvd was not able to be read when i try to boot with bootcamp....
I have tried repairing permission with disk utility but that didnt work either.
I can cut/copy and paste url's and text from word, etc, but I am unable to cut/copy and paste files within file explorer windows. I have tried running malware bytes and virus programs. HP support has tried remote access to find the problem unsuccessfully. Is there any other option besides doing a factory reset or restore point?
I have just been given a VAIO PCG8A2M (GRX316MP) , i was told "it's broken but if you can fix it yo can have it" so having a quick look at it there's no sign of life on the display but the lights come on and i can here the HDD heads moving about.
Looking a little more i found that all the ram is missing , so now im not sure if its worth buying some ram to see if it works or not ? The lack of ram would prob explain the lack of display but i wonder if i should be getting POST beeps at least, which im not.
So my question is if a VAIO had no ram should (if all else was working) it be getting POST beeps ?