Sony :: Replacing An SZ With?
Oct 26, 2009
I have just upgraded my old Sony Vaio VGN SZ370P to WIN 7 and I am very happy with it.
The computer still performs beautifully. However, I know that as a laptop its end is near (Three years and hundreds of thousands of miles.)
It is already running very hot, though that does not seem to be affecting it at this point.
My question is simple, I have noticed that the SZ line seems to have disappeared. It looks like it has been replaced by the Z line
View 10 Replies
ADVERTISEMENT
Apr 30, 2010
I'm about to order a Sony Z but want to use my own SSDs (Intel X25-M 160GB x 2). I checked out the manual
on the Sony website but there is nothing about upgrading/swapping out the hard drives.
Is this possible to do and how
View 3 Replies
View Related
Apr 30, 2009
I have a Vaio VGN-SZ61WN and I would live to get the HDD replaced with the one I've just bought. Thing is, it doesn't look too straight forward to me. The HDD is situated on the bottom left of the notebook when looking at the keyboard. There isn't a way in from the back. Just thought I'd ask before I destroy my notebook
View 3 Replies
View Related
Apr 5, 2010
I have the new Z model VPCZ117GG..and unfortunately for my region it didn't come with a Bluray drive and I had no choice of customization as well..
My version is the one with the Full HD screen,256GB SSD and 8GB Ram.
I'm wondering if it's possible to replace the DVD drive with a bluray drive. I know this will void warranty, but i'll be doing it after my warranty expire
View 10 Replies
View Related
Apr 17, 2009
I have ruined the C key.
Can anyone tell me if I can just replace the one key OR must I replace the WHOLE keyboard and if so, what sort of cost might I be looking at?
View 4 Replies
View Related
May 9, 2010
I am a frequent traveller who needs a reliable and ultra-portable notebook. I have owned a Sony Vaio VGN-TZ37 for almost 18 months. While I like it very much, it is very slow to boot up (XP). For that reason, I decided to replace the notorious in-built HDD with a SDD.
I have succeeded in replacing the original one with a Photofast G-Monster 1.8” ZIF SSD V 4 and am very happy with the result. The following is my experience.
When I decided to change to SSD, I did a lot of internet search and finally took 3 key decisions:
(1)Which SDD? – After a lot of search, I settled for G-Monster 1.8” ZIF SSD V 4. It is not the least expensive, but I am happy with the results.
(2)DIY? – A few repair shops could provide the service but they could not assure compatibility or system installation.
I decided to do it myself which is a good decision because I had to re-open the case 3 times.
(3)Secret of opening the case – There are a few weblinks offer pictures and tips on the internet. They are essential for non-technical people like me .....
View 7 Replies
View Related
Apr 9, 2009
I have just disasembled and cleaned, (to the best of my abilty), my SONY SZ2XP comp using compressed gas. Hopefully,
it will yield some results getting rid of all the dust, although i did feel like i could have done better if i managed to disassemble it further to reach all affected areas.
I'll continue to my question though, I unscrewed the heatsink and noticed that the thermal paste on the cpu looked really misapplied.
It has some big lumps of paste and seems very unevenly applied. I have owned this computer for about 2 years or so, and i have never disassembled it until now
View 5 Replies
View Related
Jul 16, 2009
My power plug on my laptop finally gave out. I cant find any articles on taking a VGN-AW series laptop apart. This is my second AW series which is a VGN-AW120J. I know theirs 2 different plugs for them. The on I have doesn't have a enclosure inside the plug and has 2 prongs that touch the pin in the power adapter.
View 8 Replies
View Related
Jan 30, 2009
I'm about to pull the trigger on a FW, but it has a 320GB 4200rpm. HD.
I've planned on buying a WD Scorpio Black later and the replacing it.
How complicated would that be? What I mean is, that I can do the hardware replacing and all that, but is it enough that I would do a recovery disc with the original HD inside and then replace the HD's and then just boot from the disc. Or do I need to fiddle around with the SATA drivers,
View 9 Replies
View Related
Jan 23, 2010
Does anyone know how to apply thermal paste to the Sony TZ series? I've opened it up and not really sure where the CPU/heatsink is. Looks complicated to further disassemble the thing
View 3 Replies
View Related
Dec 13, 2009
Just received a z590 that I want to repalce the 5400rpm HD with a faster one.
I did a search, but all the links no longer work.
Looking specifically for directions on how to remove the keyboard to get to the hardddrive (e.g. what screws or tabs to pop open)
View 3 Replies
View Related
Aug 6, 2009
I'm currently thinking of buying a Sony SR series laptop, but unfortunately here in Sweden we only get two configurations:
Vaio SR49 - P8800, Radeon 3470 256MB
Vaio SR41 - T6400, Radeon 4750 512MB
Since I would like P8800+Radeon 4750, the only possible way seems to get a SR41 and upgrade the cpu. Has anyone here got any experience on upgrading a laptop CPU? More specifically, upgrading from a T-series to a P-series.
I guess they use the same motherboards, so I can't imagine it would be incompatible, but I'm wondering whether it requires any BIOS changes which would be hard to do in a laptop bios.
View 3 Replies
View Related
Oct 27, 2009
I think I need to replace my 4965AGN on my SZ71WN/C as my laptop will loose connectivity with my router for no reason. I get the dreaded unidentified error and the only way to resolve the issue is to reboot my laptop. This was happening even before I upgraded to Win7. Even on a vanialla Win7 install, with no antivirus, it happens. You could ask if it's my router (Netgear DG834GT), but another Vaio SZ that I have works fine....
So has anyone changed their WIFI module and if so, should I upgrade to one which is WIN7 compatiable out of the box?
View 10 Replies
View Related
Jan 13, 2010
I am down to 1 GPU on my M1730, in the interest of replacing it , from the forum sticky these seem to be the options
XPS M1730
Nvidia 8700M (both single and SLI****)
Nviida 8800M GTX SLI
Nvidia 9800M GT SLI
Nvidia 9800M GTX SLI
(I assumme this list is complete still . i.e. no 260's or 280's available)
Other than Dell or EBay are there any other sites , suppliers that people know of who might supply one of the above
DELL want 340 + Vat for a sli 8700m and there is every so often a 8800M for sale on ebay but they typically want approx 500 pounds for it (anyone had experience of buying one?)
I am dubious about the 8800 as evidence suggests it runs hot so would prefer a cheap 8700m or a warrentied 9800M
View 14 Replies
View Related
Jan 3, 2009
it's an owner to join such an informative/ friendly form
I have the M1330 system and after the crazy vertical lines and freezing over and over, the motherboard is replaced now.
My wonder/worry is, AM I able to use my notebook w/out the fear of the same issue coming again ?!
View 10 Replies
View Related
Sep 22, 2009
My E6500 is having the motherboard replaced later today. Is there anything I should be aware of or that I should check out once it's done?
View 10 Replies
View Related
Jun 30, 2009
I buy the SXPS 16 with a 4670 the minute it is released in Canada and configure it to as closely to my current config as possible.
When it comes in, I manually swap the HDDs from my current SXPS 16 to the new one.
Would this allow me to get around installing Windows and all my programs? Once I swap the HDDs and turn on the new laptop, will it boot up as if it was the old one, but with newer hardware?
And I'd just like to vent my frustration that I can't order the SXPS with the 4670 and a T9800/T9900 in Canada yet
View 3 Replies
View Related
Oct 20, 2009
I'm under the impression that the Studio XPS 1645 will be using a similar, if not identical, chassis to the 1640. Given that, how easy is it to replace the hard drive with a SSD?
I didn't bother with a SSD option on account of the price, but once the price comes down a bit I'm hoping to replace the drive and use the existing drive externally.
How much of a headache is this and what should I be aware of with regard to known SSD issues,
View 7 Replies
View Related
Oct 5, 2009
Well the worst happened and my trusted Dell M1710 powerhouse that I've had for several years was dropped into a tub of water. I've got the complete care warranty so I called Dell to get a replacement unit.
Well after waiting a little over a week Dell agreed to send me a replacement unit; however, since the Dell XPS M1710 is no longer in stock they're going to send me a Dell Studio XPS 16.
I was wondering if everyone here thought that was a fair trade or an upgrade?
View 9 Replies
View Related
Dec 8, 2009
My sister believes the fan has failed (again) in her Acer 5672wlmi laptop. Last time I replaced the entire heatsink/fan unit, but I can't find them anywhere anymore. I have, however, found a fan that's supposedly compatible...
Has anyone here replaced a fan in a heatsink module without replacing the heatsink as well? From what I remember they really seem to be built quite firmly together... but if the store says this is compatible I have to assume there's some way to take them apart.
View 5 Replies
View Related
Mar 13, 2009
if any of you dv4t owners have run into the same issue trying to replace your hard drive... I opened the hard drive cover, removed the 3 screws holding the drive in place, and tried pulling up on the metal tab (the one facing the inside of the notebook) but couldn't get the drive free... I've been struggling to get the drive out for awhile now without any luck. Out of desperation I used a pair of pliers to try and get a better grip on the tab, but all I ended up doing was bending the outer casing (not the drive) slightly. It's like it glued in there or something!
View 4 Replies
View Related
Oct 27, 2009
last summer I was given a HP Pavillion dv5 that had a little problem with his screen:
The part number of the piece is 484363-001, and it seems it has to be WXGA because of the resolution (1280x800). Is there any problem if it's WSXGA instead?
View 8 Replies
View Related
Mar 14, 2009
My Bundled DVD burner is goin creepy and i wanna change it to something like BluRay.. i selected dis - [url]
i m getting it at a spl discount so i was guessing if dis will install into my laptop HP dv9000 by using the previous brezel and whatever it is....
will it install? in short, jst like hard disks, are the dvd burners /optical drives are interchangeable in laptops provided u change the caddy or whatever in the case of optical drivers...
View 3 Replies
View Related
Jan 3, 2009
When I got my new MBP with Leopard last May I was initially disappointed with iMovie 08, so I replaced it with the free download of iMovie HD from the apple website (more info here).
However, now I changed my mind and I want to put iMovie 08 back. Would I need to do a complete Leopard re-install or can I just use my discs to selectively install iMovie 08?it was easy to do just using the install discs.
View 4 Replies
View Related
Jun 12, 2009
One of my headphone jacks on my M1530 is broken and needs to be replaced. Are those part of a separate board that can be hooked into the motherboard without the need of any soldering? I'd like to get this issue fixed, and don't want to send it into dell depot for repair. So if it's just a board that needs to be replaced, I'd like to replace it myself. If so, what would the name of this board be? I haven't had much luck looking through the forum or online.
View 10 Replies
View Related
May 1, 2010
After two years of using my XPS1530, I received an error or reminder message that I need to replace my battery.
It's still working though, but not sure what is the side effect of not replacing the battery immediately.
Do I need to replace my battery if it's still holding more than an hour or so?
View 6 Replies
View Related
Sep 29, 2008
I have a M1530, with the Dell 1505 Wireless N card installed.
To say the least, it is probably the worst card I have ever seen, getting no more than 6Mb/s on internal transfers (basically wireless G speeds) even though connecting at 130Mb/s.
I have a Dlink Extreme N DIR-655 router and it is pretty good, so I know it isn't that.
Looking at PCMIA cards on the internet, I suddenly realized that there is no expansion port on this system (or I am just stupid and can't see it), so I have to go with an internal card.
Is there anything I should be looking for when getting the new card? Are they easy to install?
View 10 Replies
View Related
Nov 9, 2008
I just got my hands a Studio 15 with great specs at the cheap, but with a pretty badly scratched up LCD lid. Has anyone attempted replacing the lid? Is it hard? I've opened up and replaced a processor, keyboard, fingerprint reader, ram, and hard drive before, but never an LCD cover. I'm kinda worried about the power button and wifi catcher, and I'm worrying I may not put the screen back the right way. This is supposed to be for my cousin, but I can't give it this badly scratched up.
View 9 Replies
View Related
Mar 13, 2009
I've got a Dell M1210 with an Intel T2500 (Yonah). It is showing its age, but I love the computer. Possible to upgrade the CPU on this, even if it voids whatever warranty I might have left? If so, what are the limitations?
View 10 Replies
View Related
Feb 18, 2010
I got a new Dell Studio 1558 a week or so back. Ever since I got it, I feel a constant vibration to the left of the touchpad.
After doing some research and asking some questions, apparently the Seagate 7200 RPMs have this issue. I confirmed it was the HD by putting the HD to sleep and the vibration would stop.
The best solution to me seems to replace the Seagate with a WD 5400 RPM HD. I have been looking at their Scorpio Blue for this:
http://accessories.us.dell.com/sna/p...4&sku=A2436199
Will it work with the 1558? And, how do I go about setting up the laptop after replacing the HD?
I don't have any important documents that need to be transferred, but I am guessing I will have to use the Dell DVDs to setup Windows?
Thanks
View 7 Replies
View Related
