is it possible to overclock this version of 1810T?
I've read about a mode to apply, but it was for SU3500, I dunno if it's needed also for SU7300.
Second question, is: this Kingston Hyperix 2x4GB 800MHz memory at 4-4-4-12 timings compatible with this laptop?
As i understand it the differences in the 2 netbooks (in terms of performance) is solely the processor and amount of memory:
T
SU7300 - 3MB L2-Cache, Intel VT
4GB RAM
TZ
SU4100 - 2MB L2-Cache, no Intel VT, dual core
3GB RAM
Which of these will perform better?
Which is the difference?
Im thinking about buying acer timeline with SU4100 , does watching divx, movies, multitasking work? And does dvd's stutter ?
is it alot slower than su7300 ?
I'm looking to buy a 14" Acer Timeline. They come in 2 variants at my place, the SU3500 and SU7300 processor. Which is better? I'm not really a gamer. I'm just looking for a smooth multi tasking, web and word processor experience.
View 4 Replies View RelatedI"m looking at the comparisons between the Acer 1810 T and TZ models. The primary differences are in processor and cache sizes. Could anybody guesstimate whether there would be differences in battery life on the two models, ie the SU4100 and the SU7300?
Battery life is probably more important to me than slight performance differences.
Is it possible to have both ssd and hdd? Ok there is not enough room for both, but, beside that, could it be possible to use at the same time ssd and hdd?
Like ssd for os, and hdd for boot? Doesn't the mobo have 2 sata channel?
Btw could be a nice idea to use the pcie expansion slot where to put a 1.8 sized drive...
I have read a lot of people ask if theyr Acer laptop are overclockable on the CPU, and sometimes different users say that is possible but is difficult. I search some guide, but i don't find nothing.
if is possible overclock my CPU?
I have try whit SetFPS, i have find the proper chip on my Notebook, but when i try to move the frequencies they return to original valor.
I recently bought a N-wireless gigabit router. It is DLink DIR-655. It is reporting the connect to my 1810T AGN wireless is using G. I'm wondering why if my computer supports N and the router supports N, why am I not getting N?
When I checked properties of my wireless card in my 1810T it tells me it is a Intel WiFi Link 5100 AGN. If I check the properties and it shows N is enabled. However, under Wireless Mode it is set to 802.11a/b/g. Also, while there are several options that include a, b, and g, there is no option for N.
I actually have a Gateway EC1815U and heard it is identical to the acer 1810t.
In the Gateway bios (insyde) I see an option for a device on IDE1. IDE0 is used for the internal hard drive.
I am wondering if there is either
1- a way to expose the 2nd IDE externally to use like a eSATA device with it
or
2 - Be able to install a 2nd IDE device like a SSD to use that interface
I'm wondering out loud and checking here to see if anyone can offer some advice.
I just bought an 1810T two days ago. It is suppose to have an 8+ hour battery. However, with the setting on Power Saver it is the BatteryBar utility is telling me 6 1/2 hours after a full charge.
View 5 Replies View RelatedWould a CL4 ddr2 800 be a noticeable upgrade compared to CL6 ddr 800? Could I see a performance improvement?
View 4 Replies View RelatedI've found out that the webcam is a Suyin, I installed drivers from acer website.. and the result is still terrible.
The webcam is so slow, like 1 fps. Even when not in videocall and using acer crystal eye webcam to set it, it's slow, pixelated and sloow.. I don't mind about the colour, yellowish but adjustable, but I do mind about the fps and quality.
I guess it's a driver matter, because the driver installed is the microsoft's standard one. But I couldn't manage to get better results, also some of the settings like auto and white balance or camera control are not selectable.
i tesed if my pc could run cod4, well everything was working i meeted minimum but i failed recommended, it said my cpu was not fast enought, so should i get adriver to overclock my CPU speed,
View 8 Replies View Relatedi have a question and is very simple. My acre is the model 6930g with a p7450 a graphic card ati 4650 and 2 hard drives. i have already done overclock in my graphic card but i cant do in my cpu. how can i do? because i have already saw a lot of notebooks that the cpu could reach 2.5ghz, so i think that it is also possible do in the acer 6930g.
View 7 Replies View Relatedi want to overclock my cpu and my grafic card...
I know notebook are not made for oc because they overheat very fast,but i already got a solution for it ,i modify my back off the notbook and put in another cooler.
I got no idea how to overclock because u cant make it on Bios...
Acer Aspire 7520 G
Microsoft Windows XP Professional sp3
CPU Typ Mobile DualCore AMD Turion 64 X2 TL-64, 2200 MHz (11 x 200)
2048 ram
NVIDIA GeForce 8600M GS (512 MB)
Are there any programs out there? I believe it uses the same PLL as the 5930g.
View 6 Replies View RelatedWhich driver did you guys use to overclock the Acer 6920G's Nvidia 9500m Gs? How much did you overclock it?
View 4 Replies View RelatedAfter a few days of happy 1810T ownership, the computer has begun to have a problem where the screen locks up tight. Nothing revives the computer except holding the power button down to force a powerdown. It reboots OK but shows the screen to optionally boot into Safe Mode.
The screen is a random color when this happens: sometimes green, blue or red. It is NOT the traditional "blue screen of death".
At first I thought it was due to some problems I was having with a conflict between The KM Player and Adobe Flash (as detailed here and here, for example). Luckily I had done Acronis 2010 images at each step of the way in the "new notebook" process:
- image made right out of the box by booting from Acronis disc first, before ever running Win7 on the computer (I call this the "Day 0 Image")
- image made after doing Windows Updates, Windows Security Essentials, installing apps (KM Player, IrfanView, FireFox, etc) and user data
Thinking the problem was due to the KM Player conflicts, I restored the computer back to when there was no KM Player, i.e. out-of-the-box Day 0 Image. This went fine and Acronis worked smoothly.
I did the Windows Updates but did not install any apps or user data... and the screen lockup still happens! Sometimes it happens soon after login, other times things run OK for a while first.
I am really concerned about this. If I can't rely on the computer to not lock up regularly, it is essentially useless to me. I am very surprised to see the problem even after an "out of the box" disk restore.
Any suggestions? Even if you don't have knowledge of how to deal with this problem specifically, do you know where else I can ask? What will Acer's take on this be? I am afraid they will just pass it off as "user error" and leave me stuck...
To Add:
1) I can't remember if this has happened only when on battery, or also when plugged in. I will check and see if it happens in both modes. If it only happens when on battery, at least that shows a path forward.
2) I have not tried to restore via the Acer eRecovery DVDs yet, though I don't know why this would be any better than the Acronis 2010 Day 0 image. I was in the process of burning the first Acer recovery DVD last night when... the screen locked up!
3) I have emailed Acer Support about the problem, though I suspect they won't trust Acronis 2010 and they'll tell me to restore via Acer eRecovery DVD...
I'm looking at picking up an AS1810T to replace my Samsung NC10 netbook and my HP DV8230US laptop.
I was looking at an MSI earlier due to its better warranty (3 years) and better price ($450 as opposed to $600)...but unfortunately, the lack of VT on the T6600 is a deal-breaker.
Does Acer have Virtualization enabled on the AS1810T? The SU7300 has it, but I want to make sure that there's nothing else that would prevent me from being able to use the laptop properly...as VMWare and XP Mode are requirements for what I'll be doing with it.
just got my son the 1810TZ and reinstalled with Win7 64Bit Ultimate.
I now cannot get the wifi to work no matter what. Thoughts? Is it an Atheros? I have installed the atheros package as well as all other drivers that say wifi with no luck...keep getting network cable unplugged and in system properties it identifies a network controller to which there are no drivers installed...
I thought Win 7 would pick up all poss hardware for the most part. I never had this prob on my 1810T-6188.
My Acer 1810T has Windows 7 Home Premium x64 installed and it is using a Microsoft Webcam driver version 6.1.7600.16385 dated 6/21/2006.
On Acer's site, they list 3 Camera drivers for Windows 7 Home Premium x64:
Chicony - 1.1.95.71
liteon - 0.905
Suyin - 5.2.7.1
I put on cpu-z ( I got the crappy ram like some of the others) but what I thought was odd that it said FSB was 800 and multiplier was 8 and indicated my CPU was running at 1.6Ghz. Is this an error on CPU-z?
View 4 Replies View RelatedI have a utility reccommended here called BatteryBar. It has a category called Battery wear. What is battery wear? Is it as it sounds, a degradation of the maximum potential of a battery over time? Is there particular actions that cause an increase in battery wear?
I have a 1 week old Acer 1810T. Up until now the battery wear has been 0.0%. However, I let the battery run down to the point that the computer shutdown. I thought this was a good thing. I know in the old days batteries would develop a memory. They recommended a occasion full run down and charge. I think I read this is not true for the Lithium battery, however.
Well, after restarting my computer I see my battery wear is now at 1.4%. Is this because I let it run down? Also, if I want to my battery to last as long as it can, is it better to take it out when using it at home on AC power? That is about 90% of my usage.
Is it adviceable to delete the old preinstalled partition just to install w7 ultimate?
I have on HDD 12GB of recovery partition, 100MB of system , and 280 of OS.
What would you do.. erase all and proceed with new fresh W7? Is it risky?
I got my new 1810T and after opening it up, the first thing I noticed was that the touchpad buttons are not even.
By "even" I mean they're not level with each other. The left button sits a little higher on its right side and the right button sits lower on its left side.
Anyone else experience this? Is this something that has a simple fix like the double-sided tape for the mushy keyboard?
Also, I went into the device manager, opened up the monitor properties and when I choose "Hardware Ids" it shows this:
MONITORCMO1100
What type of panel do I have?
is it a good idea to get a T9300 and overclock it to 2.6 GHz-2.8 GHz? The only difference (according to Intel's sheets) is the clock speed between T9300 and T9500.
I plan to buy a T9500/T9300 and put it in my Acer Aspire 6920G. Hopefully T9300 and OC.
I want to overclock my processor P8400, but there are no program that's work with this processor....I use setFSB and ClockGen but this freeze my laptop.....
View 8 Replies View RelatedI have a Acer Aspire 3610 and it works really well. (after turning the video card up in the bios). anyway, i wish to overclock it to get around 1.8 to 2 GHZ out of the cpu. unfortuntly this means more heat, im wanting to replace the fan with something faster. but after a fustraiting battle, i cant find out how to open it. i removed all the screws and pried the edges open but it wont budge. it would be awesome if someone could give me a step by step way to open it. some pictures would be cool too.
View 8 Replies View RelatedI have the Asus PVR and have a bunch of movies in H.264 format. Can anyone tell me if they play well on the 1410. I will buy the 1810T if I have to but the 1410 fits my pocket better and if it does everything I need it to I can live with the minus 2 hours on the battery.
View 8 Replies View RelatedI've noticed our new 1810T's arrow and PageUp/PageDown keys often don't respond to presses, specifically when pressed higher on the key (along the upper border as someone says in one of the 1810T owner threads). This ends up happening quite a lot the way I situate my hands over the keyboard and the touchpad, and is a serious issue for me since I'm using these keys a lot in the development environment I use. As referenced above I've seen a few mentions of this issue on the forum, but no clear confirmation whether it is normal for the 1810T. Can anyone with a 1810T out there verify whether their unit exhibits this issue?
View 6 Replies View Related