Acer :: Webcam Of 1810T
Feb 7, 2010
I've found out that the webcam is a Suyin, I installed drivers from acer website.. and the result is still terrible.
The webcam is so slow, like 1 fps. Even when not in videocall and using acer crystal eye webcam to set it, it's slow, pixelated and sloow.. I don't mind about the colour, yellowish but adjustable, but I do mind about the fps and quality.
I guess it's a driver matter, because the driver installed is the microsoft's standard one. But I couldn't manage to get better results, also some of the settings like auto and white balance or camera control are not selectable.
View 4 Replies
ADVERTISEMENT
Nov 19, 2009
My Acer 1810T has Windows 7 Home Premium x64 installed and it is using a Microsoft Webcam driver version 6.1.7600.16385 dated 6/21/2006.
On Acer's site, they list 3 Camera drivers for Windows 7 Home Premium x64:
Chicony - 1.1.95.71
liteon - 0.905
Suyin - 5.2.7.1
View 10 Replies
View Related
Apr 18, 2010
I took an MSI Wind U100 webcam, it has the classic USB connection you expect for! The connector is at right instead at left like the original one.
You need:
-A WindU100 Webcam (1,3 Megapixel, a very good framerate),
-Dremel
-Some wire
-A decent soldering skill
-A lot of patience, and much more crazyness.
I don't want to post a Tut how to do it, you need only to know that pinout is the same and the colours are the same.
11 Black 3.3V
22 Purple D+
33 Red D-
44 Orange GND
Don't care about the fifth (GND too).
You need four wires to move the connection from the right to the left,and some dremel to leave out some "plastic keys" about the old one. Newer is a little thicker that the old one, so dremel the plastic at back of the webcam too.
The WindU100 Webcam has a led to show when it's used, so if you want you can do a hole to see it in the Acer. I didn't: the plastic is white so i see it too...!
A good idea is to change the whole cable if you have the MSI original one, but i didn't dismantle all....
View 10 Replies
View Related
Feb 16, 2010
Is it possible to have both ssd and hdd? Ok there is not enough room for both, but, beside that, could it be possible to use at the same time ssd and hdd?
Like ssd for os, and hdd for boot? Doesn't the mobo have 2 sata channel?
Btw could be a nice idea to use the pcie expansion slot where to put a 1.8 sized drive...
View 7 Replies
View Related
Dec 20, 2009
I recently bought a N-wireless gigabit router. It is DLink DIR-655. It is reporting the connect to my 1810T AGN wireless is using G. I'm wondering why if my computer supports N and the router supports N, why am I not getting N?
When I checked properties of my wireless card in my 1810T it tells me it is a Intel WiFi Link 5100 AGN. If I check the properties and it shows N is enabled. However, under Wireless Mode it is set to 802.11a/b/g. Also, while there are several options that include a, b, and g, there is no option for N.
View 10 Replies
View Related
Mar 7, 2010
I actually have a Gateway EC1815U and heard it is identical to the acer 1810t.
In the Gateway bios (insyde) I see an option for a device on IDE1. IDE0 is used for the internal hard drive.
I am wondering if there is either
1- a way to expose the 2nd IDE externally to use like a eSATA device with it
or
2 - Be able to install a 2nd IDE device like a SSD to use that interface
I'm wondering out loud and checking here to see if anyone can offer some advice.
View 10 Replies
View Related
Nov 19, 2009
I just bought an 1810T two days ago. It is suppose to have an 8+ hour battery. However, with the setting on Power Saver it is the BatteryBar utility is telling me 6 1/2 hours after a full charge.
View 5 Replies
View Related
Feb 11, 2010
Would a CL4 ddr2 800 be a noticeable upgrade compared to CL6 ddr 800? Could I see a performance improvement?
View 4 Replies
View Related
Nov 11, 2009
After a few days of happy 1810T ownership, the computer has begun to have a problem where the screen locks up tight. Nothing revives the computer except holding the power button down to force a powerdown. It reboots OK but shows the screen to optionally boot into Safe Mode.
The screen is a random color when this happens: sometimes green, blue or red. It is NOT the traditional "blue screen of death".
At first I thought it was due to some problems I was having with a conflict between The KM Player and Adobe Flash (as detailed here and here, for example). Luckily I had done Acronis 2010 images at each step of the way in the "new notebook" process:
- image made right out of the box by booting from Acronis disc first, before ever running Win7 on the computer (I call this the "Day 0 Image")
- image made after doing Windows Updates, Windows Security Essentials, installing apps (KM Player, IrfanView, FireFox, etc) and user data
Thinking the problem was due to the KM Player conflicts, I restored the computer back to when there was no KM Player, i.e. out-of-the-box Day 0 Image. This went fine and Acronis worked smoothly.
I did the Windows Updates but did not install any apps or user data... and the screen lockup still happens! Sometimes it happens soon after login, other times things run OK for a while first.
I am really concerned about this. If I can't rely on the computer to not lock up regularly, it is essentially useless to me. I am very surprised to see the problem even after an "out of the box" disk restore.
Any suggestions? Even if you don't have knowledge of how to deal with this problem specifically, do you know where else I can ask? What will Acer's take on this be? I am afraid they will just pass it off as "user error" and leave me stuck...
To Add:
1) I can't remember if this has happened only when on battery, or also when plugged in. I will check and see if it happens in both modes. If it only happens when on battery, at least that shows a path forward.
2) I have not tried to restore via the Acer eRecovery DVDs yet, though I don't know why this would be any better than the Acronis 2010 Day 0 image. I was in the process of burning the first Acer recovery DVD last night when... the screen locked up!
3) I have emailed Acer Support about the problem, though I suspect they won't trust Acronis 2010 and they'll tell me to restore via Acer eRecovery DVD...
View 10 Replies
View Related
Nov 7, 2009
I'm looking at picking up an AS1810T to replace my Samsung NC10 netbook and my HP DV8230US laptop.
I was looking at an MSI earlier due to its better warranty (3 years) and better price ($450 as opposed to $600)...but unfortunately, the lack of VT on the T6600 is a deal-breaker.
Does Acer have Virtualization enabled on the AS1810T? The SU7300 has it, but I want to make sure that there's nothing else that would prevent me from being able to use the laptop properly...as VMWare and XP Mode are requirements for what I'll be doing with it.
View 6 Replies
View Related
Feb 12, 2010
just got my son the 1810TZ and reinstalled with Win7 64Bit Ultimate.
I now cannot get the wifi to work no matter what. Thoughts? Is it an Atheros? I have installed the atheros package as well as all other drivers that say wifi with no luck...keep getting network cable unplugged and in system properties it identifies a network controller to which there are no drivers installed...
I thought Win 7 would pick up all poss hardware for the most part. I never had this prob on my 1810T-6188.
View 10 Replies
View Related
Oct 30, 2009
I put on cpu-z ( I got the crappy ram like some of the others) but what I thought was odd that it said FSB was 800 and multiplier was 8 and indicated my CPU was running at 1.6Ghz. Is this an error on CPU-z?
View 4 Replies
View Related
Nov 26, 2009
I have a utility reccommended here called BatteryBar. It has a category called Battery wear. What is battery wear? Is it as it sounds, a degradation of the maximum potential of a battery over time? Is there particular actions that cause an increase in battery wear?
I have a 1 week old Acer 1810T. Up until now the battery wear has been 0.0%. However, I let the battery run down to the point that the computer shutdown. I thought this was a good thing. I know in the old days batteries would develop a memory. They recommended a occasion full run down and charge. I think I read this is not true for the Lithium battery, however.
Well, after restarting my computer I see my battery wear is now at 1.4%. Is this because I let it run down? Also, if I want to my battery to last as long as it can, is it better to take it out when using it at home on AC power? That is about 90% of my usage.
View 5 Replies
View Related
Feb 22, 2010
Is it adviceable to delete the old preinstalled partition just to install w7 ultimate?
I have on HDD 12GB of recovery partition, 100MB of system , and 280 of OS.
What would you do.. erase all and proceed with new fresh W7? Is it risky?
View 4 Replies
View Related
May 4, 2010
I got my new 1810T and after opening it up, the first thing I noticed was that the touchpad buttons are not even.
By "even" I mean they're not level with each other. The left button sits a little higher on its right side and the right button sits lower on its left side.
Anyone else experience this? Is this something that has a simple fix like the double-sided tape for the mushy keyboard?
Also, I went into the device manager, opened up the monitor properties and when I choose "Hardware Ids" it shows this:
MONITORCMO1100
What type of panel do I have?
View 4 Replies
View Related
Oct 24, 2009
I have the Asus PVR and have a bunch of movies in H.264 format. Can anyone tell me if they play well on the 1410. I will buy the 1810T if I have to but the 1410 fits my pocket better and if it does everything I need it to I can live with the minus 2 hours on the battery.
View 8 Replies
View Related
Apr 20, 2010
I've noticed our new 1810T's arrow and PageUp/PageDown keys often don't respond to presses, specifically when pressed higher on the key (along the upper border as someone says in one of the 1810T owner threads). This ends up happening quite a lot the way I situate my hands over the keyboard and the touchpad, and is a serious issue for me since I'm using these keys a lot in the development environment I use. As referenced above I've seen a few mentions of this issue on the forum, but no clear confirmation whether it is normal for the 1810T. Can anyone with a 1810T out there verify whether their unit exhibits this issue?
View 6 Replies
View Related
Feb 1, 2010
is it possible to overclock this version of 1810T?
I've read about a mode to apply, but it was for SU3500, I dunno if it's needed also for SU7300.
Second question, is: this Kingston Hyperix 2x4GB 800MHz memory at 4-4-4-12 timings compatible with this laptop?
View 8 Replies
View Related
Jan 20, 2010
I am looking at replacing my 1810T bilingual keyboard with a US version very soon and am trouble finding any info or disassemble guide with respect to that model.
View 8 Replies
View Related
Nov 15, 2009
UPDATED FOR UBUNTU 10.04 LUCID LYNX
Here it comes, updated guide for Lucid.
Packard Bell / Gateway clones:
This guide has also been tested on a Packard Bell Dot M/U with bios v3303, and it should also work on the Gateway clone. If you have a 1410/1810 and something doesn't work, please report back.
What's working after a standard Ubuntu 10.04 install:GraphicsAudio out, speaker mutes when pluging in headphones. Good volume.Networking, both wireless (intel wifi 1000) and wired (the atheros gigabit)FN +:F4, suspends fineF6, monitor goes blackF7, touchpad on / offF8, muteF9, Bloq NumRePag: HomeAvPag: EndUp: increase volumeDown: decrease volumeRigh: increase brightness: skips steps.Left: decrease brightness: skips steps.J,K,L, etc: numeric keyboard ok.What's not working:Audio in: the integrated mic doesn't work.FN + F5: not recognised, doesn't toogle displaysAutomated Install (recommended): I've done a script that should do it all automatically. In detail:
What the script does:Configure gnome-power-manager backlight dim and hard disk power savingDownload, patch, install and setup acerhdfInstall the power saving scriptInstall the debugging scriptIf laptop-mode-tools is installed, suggest uninstalling and, if you want, uninstallFix the brightness hotkeys issue (jumps 2 levels on every key press)Disable ethernet Wake on Lan (doesn't enable when on AC)Disable uneeded services: cron, anacron and atd (they don't enable when on AC)What the script doesn't:Add the noatime parameter to the ext2/3/4 partitions in fstab. You'll have to do it manually.How it works:In a terminal, run ./InstallAcer_11.6_PowerSaving.sh --help to get a full list of options.If you want to install everything: ./InstallAcer_11.6_PowerSaving.sh --installDisclaimer:This script comes with no warranty. Use it at your own risk. I won't be responsible for any damage this could do to your system or data.Manual Install:
Power saving tips:The Script:By default, an ubuntu install won't take too much care of saving power, which is very important in an ultra mobile laptop. You can easily setup the system to enter some power saving modes, specifically the sata controller and the sound chip......................
View 10 Replies
View Related
Jan 14, 2010
I recently bought 1810T. It has W7 ultimate 64bit and 3303 bios installed. Unfortunately there is the issue that battery is discharging for about 5-8% per day when laptop is off (shut down).
I've disabled all "wake on" properties in network adapter driver properties but
unfortunately it does not help.
View 10 Replies
View Related
Jan 6, 2010
I was thinking of picking up a 1810T with an SU7300 and 4GB DDR2; I want something portable, good on battery, and for (very) light gaming.
How would the 4500MHD handle KOTOR, WarCraft III, or TorchLight? These aren't very demanding games and I was hoping to be able to play them on the go...
Honestly, the 1810T is a very nice little system!
View 4 Replies
View Related
Jan 5, 2010
I installed Windows 7 Ultimate, downloaded software/installed software the entire time, and browsed the internet).
Anyway, I plugged it in today, and it's been charging for just over 4 hours now and it's only at 78%...is this unusually slow to charge? Should I send mine back? I've never had a proper working battery take this long to charge, even 9 cells.
View 10 Replies
View Related
Oct 13, 2009
I add wwan option gtm 382 mo40x in my acer 1810tz dual core.
I solderin mini-pci-e connector 3.9mm hight and sim slot.
wwan modem is unloced.
Why my acer + gtm382 working only bios v0.3108 not 3113 3115 3117 "not boot, display is boot is nothin and tilt " but 3108 working nice.
I need new bios.
Crack bios? Hack modem firmware?
View 10 Replies
View Related
Nov 17, 2009
[url]
Release Notes
Please post your results like this:
-Model(Device/CPU)
-Operating system
-Graphics Drivers
-Browser
-Results
My results:
1810T/su3500
Vista x86
1986
Firefox/IE
Does not work
Update: It works now after applying these useful instructions:
Quote:
Firefox 3.5.5 users have to follow a separate set of instructions:
Before running a YouTube HD clip, please go to Firefox menus and select Tools/Clear Recent History. Ensure the Cookies checkbox is checked, and do the clear. Next, go to Tools/Options/Privacy and select “Never Remember History”.
The above procedure will ensure an HD clip is first loaded in SD mode with 640x horizontal resolution, and then you select the HD button and get GPU- accelerated playback at 1280x HD mode. If you do not first delete Cookies and then turn off history, you may enter an 854x SD horizontal resolution upon starting up an HD clip which is not GPU-accelerated today. If starting in 854x SD mode, when you switch to the HD version, it will still be non-GPU accelerated.
View 10 Replies
View Related
Feb 5, 2010
When I try to remove it, I can't. There are 4 mini holder on the top of the keyboard, after I push them, the keyboard lifts up a bit, but at the upper angles it is still stick to the chassis. No video disassembly guide is available...
View 4 Replies
View Related
Sep 19, 2009
This is the follow-up thread to Phil's great Timeline Tweaks thread.
I've decided to leave out 13"+ timelines for now and focus on the 11.6" models.
3810T, 4810T, 5810T and Travelmate users are welcome to create dedicated tweaks threads.
Some tweaks in this thread work for other timelines too, though.
Software
...Drivers:
......Chipset & SATA
......Graphics:
Update:.................................
View 10 Replies
View Related
Sep 29, 2009
I know that the Fn + Brightness key issue on XP has been mentioned in other 1410/1810T threads, but I thought it might be nice to start a thread specific to the problem. After it's fixed we can add it with the other stickies.
I recently installed XP on a coworkers 1810T and because i'm interested in the machine myself i wanted to investigate the brightness issue and see if Acer is working on a fix, or even recognizes the problem.
My correspondence with Acer has been extremely frustrating and disappointing. I was considering using the 1810T laptops to replace our office's aging Lenovos but Acer's lack of support has made me majorly turned me off to that idea.
Here's my discussion with Acer, reverse chronological order (start at the bottom):............................................
View 10 Replies
View Related
Jan 28, 2010
Anyone who has compare the two?
Similiar price, similiar specs, similiar 3 pound weight, similiar form factor, same 11.6" screen, except for CPU and graphics.
I've got an Acer Aspire One 11.6" netbook, which I had to purchase in an emergency to replace a failing laptop two days before travel. It's great, except it's a bit too slow. I managed to make it perform miracles such as smooth YouTube playback and 100% stutterfree AVCHD video file playback (from my Panasonic camera), but I need to use heavyweight apps now, plus a little lightweight video editing (just trimming clips) and much faster copying and synchronization of big files between computers over Ethernet (gigabit) and faster USB performance. And possibly, occasional Blu-Ray quality playback, which both alternatives can do.
So.... I'm looking for a full-performance laptop in the same form factor, and it has boiled down to the Acer Timeline 1810T (SU7300 Core2 Duo version and Intel GMA4500), and the Acer Ferrari One (with the AMD Turion64 X2 and Radeon HD3200). Some love/hate the Ferrari branding, but I don't really care about the Ferrari branding, however red is my favourite color, and is the color of my ao751h anyway.
Which CPU and graphics perform better than the other?
I would bet the 1810T with the Core2 Duo would have better CPU scores, while the Ferrari One would have the better graphics score (being a Radeon HD3200).
View 10 Replies
View Related
Feb 16, 2010
Today i went to a computer store to check the 2 above mentioned laptops.
1. Gateway EC1815u
[url]
2. Acer Timeline 1810T
[url]
Both are identical in screen size, weight, features... The only difference is that the Gateway has 500gb Hdd whereas the Acer Timeline has 320gb.
So i was deciding to buy the Gateway however on close inspection of both the laptops side by side i found that the Acer Lcd was slightly brighter and more crisper than the Gateway Lcd.
At this point in time i searched the internet but could not find any reviews for the gateway laptop though there are quite a few for the Acer Timeline which all praise the Acer's Lcd Screen Quality.
Now i'm totally confused as to which one to buy...? I was more keen on the EC1815u since it has 500gb hdd compared to 1810T which only has a 320gb hdd but i found the 1810t screen quality to be better than EC1815u...!
1. Has anyone compared both these laptops screen..? I was told that Acer owns Gateway and that the EC1815u is the exact copy of 1810T then how come the screen quality of both the Laptops is different...?
View 6 Replies
View Related