Acer :: Upgrading 5920g GPU To Hd 4650 From 8600m GT
Jun 21, 2009
I have purchased a mobility hd 4650 from an Acer spare parts source and intend to replace my 8600m GT with it.
The order has been shipped and will hopefully arrive within 2 weeks.
Based on this thread (5920G Upgraded To...Radeon HD 4650?!) I should be able to simply install the card physically (I've disassembled this laptop for a processor upgrade before) and then just throw on the drivers (the device comes with the Acer vBIOS preloaded)..................................
I have a acer 5920g with a 8600m gs 256mb ddr2. my bios is last version 1.3813 and my vga bios version is nvidia 60.86.54.00.27. The chipset is pm965. The vga is MXMII
I have obtained a 8600m gt 512mb ddr2 from a compal fl90 free. It's MXMII too
I've installed 8600m gt in my acer and when run it only see a black screen. Laptop is runnig but i don't have any image.
I've read somethig about a acer vga bios for the 8600m gt but i don't know what i've to do.
I don't know if i have to install this bios in the 8600m gt in another laptop. There is something patch for this card?
This vga bios is possible to install in any 8600m gt?
I admit that one should take this with a grain of salt but still, the fact remains that an upgrade path now exists for the previously-tricky 5920G, and possibly for ALL Acer MXM models!
I am playing "Dragon Age: Origins" and, for the first time, a game is very, very slow. I already reduced the graphics in game, i already searched better drivers for the graphic card and got no better results. Besides that, the latests drivers recommended for my graphic card has unusual results in windows: sometimes, it blinks!
I already re-installed my Windows Vista to get better results... and got the same.
I know it's possible to upgrade the hard drive in my Acer 5920G, but I've got no idea what type of hard drive to look for, and which will be compatible etc.
currently i have 2gb of RAM, and i want 4GB (if possible) as i find when ever i play games, its really starting to struggle
so really the help i need is,
what RAM do i get?
is it actually possible to have 4gb of RAM in this comp recognised?
i will note that i will probably get some expert tech ppl to fit any upgrade cos i dont want to risk breaking my laptop - but i know that if i go in there they will sell me what ever they have - and it will cost me alot more than if i buy on the net first.
I have ordered this laptop recently (Spec is below), well, it's due to arrive tomorrow, and am probably going to upgrade to Vista x64, or at least give the new Windows 7 x64 a go on it. However, I'm just unsure as to whether it will be easy enough to migrate or whether I'm likely to have issues finding drivers for the relevant hardware. I hope someone here can give me some advice as attempting to scour the internet for a response for this particular model has been a nightmare, I've found the drivers page but it's all a bit confusing with seperate 64bit and then SP1 sections! ...
Just like the title said, will upgrading my cpu from the T5450(1.66ghz) to a T7500(2.2ghz) change my gaming performance or is the T5450 enough power to fully run my videocard.
I OC my videocard by 30% so the clocks are 617.5Mhz/520Mhz instead of 475/400mhz, does the ocing get bottle necked by the weak cpu?
Is it worth the $100 to upgrade my cpu or should i just save the money and buy a new laptop because my 1520 is almost 2 years old but it's a very good laptop, i can get 4700 and sometimes even 4850 on 3dmark06.
i bought a acer gemstone 5920G M laptop a couple of years ago and the graphic card has blown up had someone look at it and he told me to buy a new graphic card to replace the blown one.
The card i need is a Nvidia 8600M GS 512 meg version im finding it difficult to find this card does anyone know of any companies. i did manage to speak to one company and they said they were out of stock but they told me i could use an nvidia 8600M GT card instead.
I have an Acer Aspire 5520G. I found a great deal on a brand new 9600M GT card. Both are MXM2. Question is: can I upgrade ?
I`m saying this because I have 2 VGA outs ( DVI + DSUB ), and I wonder if they both will work if I upgrade. Plus I want to be sure they are compatible.
My 5920G which I got for Christmas is giving me some problems.
I have gone to power options and and changed the settings so when I close the lid, nothing must happen. But when I come back in about 20 minutes after leaving the lid closed, there is no way of me getting the LCD to start up. The only way I can get past this is by pressing the power button in for a few seconds forcing it to shut down. Obviously this is bad for my notebook. How do I get this sorted out? The same thing happens if I leave the lid open and come back in a while.
I have the Acer Aspire 5920G. Since my laptop is starting to get a bit too warm, I would like to know the steps in cleaning the fan for my laptop. I already got a can of compressed air. Can someone please tell me the exact steps to clean the fan?
I have had a 5920G for nearly a year and it runs great when it is plugged in. As soon as I unplug it when it is 100% charged, the battery runs out in like 30 seconds.
Acer 5920G won't charge. When I plug in the charger the light that normally comes on to indicate that it is charging does not light up and in windows the icon that indicates that it is charging does not come up either.
My PC is the Acer 5920G best buy configuration, about two years old and no components are overclocked.
I was using it when this happened, I just noticed that the light went off and then it wouldn't charge when I plugged in the charger. As far as I know all the other components work correctly though it does have poor battery life. I was downloading a large file so I had it running for about six hours straight if that makes any difference.
I've checked the charger itself and nothing came loose. The green light on the charger also lights up when I plug it in so it is probably not the outlet that is the problem plus I've tried it in multiple outlets.
I'm pretty sure its either the battery or the charger, but I would like to know for sure and get advice from anyone else who may have had this problem.
Past few days I got my 8600M GT 256MB DDR2 GPU overheated and it is broken now. Sigh!! The system was still bootable and I did even hear the login sound not until today when I just unplugged the HDD and GPU myself. When I put them back together, I won't boot as usual. It stops loading a while after I turned it on and stays freeze until I shut it off.
FYI, I removed the HDD to copy a backup of my content into another PC. While connecting to other PC, I did change some setting on the Ownership of some folder to get it accessible. As for the GPU, I just simply removed it to take a look myself and snap some photo of it, then inserted it back as before.
So, I wonder will these techies stuff I did awhile back could corrupted the bios that would make the system halted halfway.
Additional information that I would like to share is that I have decided to replace my GPU with ATi Mobility Radeon HD3650 512MB DDR2 instead of the original and did learn the method to do so. Read on some info regarding flashing the GPU, but was not sure bout it.
I tried installing Service Pack 1 and it won't boot. Microsoft has just sent me a Vista Home Premium Repair CD that will hopefully fix it. I have Recovery Discs, but then I'll lose all my data. This is the 2nd time that my 5920G has broke like this, is there a huge design flaw with this laptop?
Is Acer always like this? It was such a high end laptop for its price (8600M GT, Core 2 Duo 1.5 Ghz, 2 GB RAM, HDMI, HD-DVD, for $1099), but I can never trust this company again.
I have a 5920g computer which I adore, sadly we always hurt the ones we love, I dropped it and broke the right hinge, because of that the plastic frame of the monitor ripped 2. It still works perfectly fine, but its annoying as hell to watch my lappy like this all the time. I called acer, and found a provider who can repair it for 400 dlrs (I payed 1000 dlrs for the lap) so well, its seem outrageous to me paying 40% of the total price for a hinge replace.
Anyway, I found the hinge and the other parts on Ebay singapore, for less tan 100 dlrs. So, heres my question, does anyone know how hard is it to replace this parts, I am a mildy medium kinda handy guy, with some hardware skills. So anyone know if this is hard, is there a guide around that can show me the process, or should I just pay the 400 dlrs and get this thing done.
Ive taken the back cover off my 5920 many times and really never took a look at it until now. What i noticed is that the vents for the ram are covered by a glossy black see through tape rather than mesh, which covers all the other vents.
Ive linked a picture below: add http into brackets
Has anyone else noticed that in their laptop? or is mine the only one where they ran out of mesh and decided tape was just as good. I wanna just rip it off.
Another thing, has anyone been able to overclock their 5920?(mines got a T8100) ive been searching for days and cant find anyone who has. I always have my backcover off and have my laptop resting on a custom dual 120mm fan notebook cooler. My idle temps are from 37-42, load is just over 60. I wanna push this thing just a bit more.
My 5920g start it wont even get to the postscreen happened right after the hdd got messed up.So i changed i figured that it was just the hdd that kept it from starting but nothing happened.So i asked and some told me it could be anything im really hopping its that its just the gcard since its the 8600m gt.One person told me to put a cd in the drive and if its spins it its probably the card and not the motherboard or cpu but idk.So best case if its the 8600m gt, could i upgrade it to the 9600m gt or the 9650m gt since they also are mxm2.
I think the bios support the 9600m gt but im not sure about the 9650m gt.
I really wana finish my fallout 3 game i was almost at the end.
I got these temperatures by running orthos to stress the cpu, and furmark to stress the gpu at the same time. Are these temperatures normal for an Acer Aspire 5920g? Cause I find these temperatures rather high, and I'm wondering if these are safe. I already have applied some artic silver 5 thermal compound to the both the gpu and the cpu.
I am a "silver surfer" who is starting to enjoy "playing" and "tweaking" my Acer Aspire 5920G on pre-installed Vista SP1 as a little hobby to pass the time
So far I have confined myself to dabbling with software and Vista itself but am now thinking about becoming more adventurous and upgrading the RAM from present 2GB to 4GB.
Firstly, is this a worthwhile upgrade bearing in mind I do not run any particularly intensive applications? In other words will I notice a performance difference in,for instance, boot times etc ?
Secondly, a few months ago I think I saw an article or thread in this Forum explaining how to increase the RAM in a 5920G and containing a couple of very useful diagrams.
I thought I hibernated or maybe something triggered it back on... i don't know! But my laptop has been sitting inside a drawer while it was running! And I don't remember when the last time I used my laptop and stuck it in there! I opened it up and I saw was BSOD!
So I just turned it off and turned it back on. Nothing posts on the screen and the hard drive light will blink for a second and then stop. Sometimes the fan will just turn off and it will constantly reboot itself. When that happens it only stays on for a few seconds but nothing shows up on the montior.
Man I think I screwed it up. I opened it up and I don't see any physical damage. I even took the heat sinks off and the chips look normal. I don't know what to do now. I have already tried running without a hard drive, only 1 ram stick in either slot. Nothing.