Acer :: Aspire 6920g- Wiped All My Factory Settings
Nov 20, 2008
i have a Acer aspire 6920g problem is i upgraded to vista ultimate now its wiped all my factory settings for example it used to have a nvidia 9500m gs now it says its only a standard vga onboard,it used to display 1366x1024 now only 1024x768, also i lost alot of things like the tuba bass sound the hd,and crystalbrite stuff ,it also says i only have one storage device when before,if a sucessful resolution and my baby is back then there will be ££££ involved as i know next to nothing of tech
when I restart my laptop what button do I press so it brings up the option to reboot the laptop back to factory settings this should include original state of the OS etc.
I have an Aspire V3 which has become very crippled. As the laptop was not in my care before now, I had tried to use the Restore Factory Settings option in the Recovery Management tool, however when I click the button to restore, nothing happens. Â I have tried running windows 8 in safe mode as well as pressing alt-f10 on start up. Nothing seems to be working. Is there any way I can reset this short of using a pre-made recovery disc?
I have an Aspire V3 which has become very crippled. As the laptop was not in my care before now, I had tried to use the Restore Factory Settings option in the Recovery Management tool, however when I click the button to restore, nothing happens. Â I have tried running windows 8 in safe mode as well as pressing alt-f10 on start up. Nothing seems to be working. Is there any way I can reset this short of using a pre-made recovery disc?
settings I should be using for gaming. Currently i'm using the default settings. It seems to run spore perfectly fine no lag/choppy game play (offline) a little online though and the graphics are smooth and sharp. When I play nhl 09 the gameplay is very erratic and choppy and the graphics are terrible, they start off decent and then just digress completely to box like looking players as if it were played on something a bit better then the n64. I checked the system requirements for nhl 09 the 6920g meets the requirements I even have 4gig ram not 3. Is it something to do with my settings or is the 6920g just not good enough to play it? Would I be better off returning it and try to exchange it for 08 see if that runs better, although ultimately i'd like to keep 09 if possible.
Some notes about my computer: Not much is installed on it games/ software wise, I only have spore, nhl 09 and nba 2k9 installed, office ultimate 07, and then antivirus software and what ever came with the computer, plus the usual media players, IM, etc. I have 92 gigs free on my first partition, where it is installed. on the other partition is where i keep all my media.
to put laptop back to factory settings, so I done the Alt/F10 on the Acer logo page to take me to the page to start this. On the Acer eRecovery Management Page I use the restore system to factory default, when I do this I get a message saying D2D32 - Type mismatch and then hangs there forever until you turn it off. I was reading on here about that error code and done what it said to do to make sure that it was enabled and it is.
I have rang Acer and they said theres nothing they can do as it out of warranty, by 24 days
He didnt make any recovery discs and hes pissed at me because this has happened! am not happy myself, as I rebooted 3 other acers with no problems.
Would he need to purchase disks or can they be got free?
About a week ago, some serious problems happened to my TravelMate 3280 to the point that booting in safe mode doesn't even work. I couldn't access the eRecovery Management either and didn't any recovery DVD.
So finally, I reinstalled windows XP SP3 from scratch. As a result, the computer didn't have Acer eRecovery Management installed. I still prefer the original factory settings though. So I browsed around online forums and found a thread by Pupples at Install Factory default, eRecovery
I did what Pupples suggested, managed to restore the alt+F10 function, and entered the Acer Recovery Management during start-up. Then, I chose the Restore Factory Settings option.
The restoration process began smoothly until about 50-60% progress when an error message occured. It says:
Fails in creating or opening a file C:preload.tag D:preload.tag X:preload.tag
After those messages, the computer booted again from the beginning and then entered a black screen with a writing on the top of the screen. The writing:
NTLDR is missing. Press any key to continue.
I pressed any key, but the same NTLDR message kept on re-appearing.
Does this have anything to do with the FAT32 or NTFSthing?
Are there any ways to restore my TravelMate 3280's factory settings?
My daughter has managed to get a virus on my laptop which has completely wiped it out, it won't start windows, it won't do anything. Its an acer aspire laptop and I worked out it has a partition from googling and did the Alt F10 thing which seemed to work a dream, did a restore to factory defaults etc. etc. but it then started to load windows, I had to choose my location,enter username and password etc. etc. and then nothing, just a blue screen (which is the windows backdrop) and nothing. I've taken the battery out after about 2 hours, restarted the computer and it did the same again and has now been sitting at this blue screen for an hour or so, should I do Alt F10 again? or am I just suppose to wait it out?
What is the point of sending a laptop to repairs if they do more damage than good? I could put up with the dodgy screen. I have months of work, musical compositions etc. stored on that laptop. This is a disgrace and I can't imagine what would possibly compensate for it. I'll have to see what I can get off my old laptop that I gave to someone else and look through my emails for stuff I sent people.
I don't use it very much; it's more a backup machine and the occasional Skype to grandkids. Been having a problem with being unable to use windows update; keeps getting an 8007005 error.
Googling reveals a lot of folks with the same problem, some different fixes, and mixed success stories. I've tried several of the fixes with no luck and probably made things worse than they were before (now Defender won't update).....
I got rid of multiple malware problems, but I still don't have sound when going to youtube e.g., as well as can't install anything. Therefore I think the best thing to do is to reset the computer to factory settings.
I have a Acer Aspire 6920g with the following specs:
Geforce 9500m GS 512MB 4GB RAM Inter Core 2 Duo Processor T5750 2.0 Ghz Windows Vista SP1 Home Premium
I have tried lowering settings to lowest, but i only notice a couple of fps gain.. So if i change my settings from medium to low, i notce +3 fps wish seems really weird. I tried using a lot of tweaks with the commandline, turning off clip capture.. but nothing help, it's still runs at about 15-17fps. Ireally love this game, and I hope i can play it at an acceptable speed. I understand that the game is extremely unoptizmed, but i hope there is something i can do.
I've tried a couple of drivers like the ones on acer site 176, 179.28, 179.48, 182.50 (dox).. but i noticed that all are about the same.. I even tried installing XP, but that didn't help either.
so what do you think i should do?
And for those who have acer 6920g, are you able to play GTA4 fine?
this thing makes a loud noise and know one responded to my thread concering my DVD-R :'I'll guess I have to do it on my own or call acer support . But how can i take this thing out so i can see if some screw is lose or there is some dents(How could there be dents who knows)I'd like to see the and were they are located...i'll probably be ended calling support with my dad, Hes another thing. Some CD's it makes no noise, and its always working with those CD's. Other CD's make hella lotta noise...this is a werid conclusion but I THINK DVD's make no noise, and CD's make noise, now not just Music CD's but i mea CD's with 700m not 4 gb like DVD's.
well i have a very old dell demension 3000, i saw restoring the os with a hidden partition/program created by dell can restore to factory settings. but the thing is if it fails i dont want to go by windows xp/windows vista os operating disk/activation key
cannot access the Dell back to factory condition in my young daughters Inspiron 6400, Ctrl - F11 I get no response except a load bleeping, is there any other way of accessing it?
I have a Inspiron 5437 with windows 8.1. I'm unable to boot it past a blue box asking for the system password. I don't have that password. My wife and daughter had somehow set this password up. before this I could not get windows 8 to open without a password. I do not have either of the required passwords. Is there a way for me to easily restore to factory settings? hey have no data on the computer that needs to be saved.
I have a inspiron mini 10v that I wish to set back to factory settings, I have searched through boot menu's and as well as tried ctrl+F11 but still have no luck resetting it.
I have pushed the f8 button every way I can think, before the windows screen, after the dell splash, the whole time, and cannot get to the factory restore menu.