I rwad a guide and it said all laptops were different so im wondering what this laptop is like. Is t ok to also blow dust etc out and not use compressed air if i cannot get compressed air?
View 4 Replies
I think its time i gave everything a quick clean.
What is the best method?
Compressed air?
Do you take the back off and clean down the fans etc or does this void the warranty?
I would like to know where i can get windows XP drivers for Acer Aspire 5930G. I want to dual boot XP with the Vista that came preinstalled.
I have two partitions on factory setup: one for VISTA OS and the other is labelled as DATA. I thought of formatting the second partition and installing XP on it. Is this possible? Would a boot menu be created? Or is there any other sequence in which i should install this.
The Specification is as follows:
Intel Core2Duo P8400 2.26 GHz
512 MB nVidia GeForce 9600M GT
4GB DDR2
250 GB HDD
and the rest...
I own a 5930G for almost a year.It has an NVidia 9600M GT and it says "1080p full hd" on a sticker.
3 questions:
Using Vlc media player,I have minor sound problems with 720p .mkv files.Particularly,every 3-4 seconds,the sound seems discontinuous for an instant.Is there something I can do about it?
How can I check if I have the latest graphics card drivers and if not,update them?
This and my former aspire acer model,can only burn a few brands of cd/dvds without error.Lots of common brands,like TDK,philips etc get a failure while burning always at the time that the burning process is beyond 80% complete.I start to think that this is a common problem for acer laptops.Can you suggest brands of cd's/dvd's that work well?in my former acer aspire model,"that's write" were the only ones that I could find that worked 100% of the time.And I had tried about 12 known brands.In my 5930g model,I haven't tried to test a lot of brands yet,but the "that's write" brand doesn't work any more.I have burned less than 10 cds and the problem occured right from the beginning.
my battery life is reduced to a mere 30 seconds.Is there a way to recalibrate it?can't seem to find it in the acer e-power management
I've got problem with my webcam. She worked well when I had got linux Fedora 9 and preinstalled MS Windows Vista. Later I changed Vista 32 bit on Vista 64 bit and I long didn't used the webcam. Later I updated my bios under MS Windows Vista x64 (to v1.19 earlier I had got v1.15). One day I wanted to make a foto with webcam but with no success because Suyin application say Camera not found. Webcam "Vendor ID" is 0c45 and "Product ID" is 63e0. These values indicate on Sonix Webcam but I'am sure that I've got Suyin Webcam and that before I had corect Vendor ID and Product ID for Suyin Webcam. I want to add that i have tried to downgrade to older bios but it makes no difference. I want my Webcam back.
View 10 Replies View RelatedI have an Acer Aspire 5930G and I'm simply wondering what acer programs are worth still having on the computer (or any programs that came with the computer for that matter e.g. NTI backup now 5) =)
View 4 Replies View RelatedI decided to restore my aspire 5930g laptop to factory defaults, and started out with creating the restoration discs. At this point, i wasn't really aware that one could restore from the harddrive.
So i booted up the discs and started the restoration process. But now, the dialog tells me to insert the third disc, while i only have two. What should i do? I could try to kill the restoration process and start over from the harddrive, but im afraid to harm the system.
I just reinstalled my Acer Aspire 5930G (844G32BN) with Vista Home Premium. Everything looks fine except the wireless connection. My computer cannot find any wireless networks (although my other notebook finds all 3 around me). It looks like as if the notebooks WiFi signal would not work.
Could anyone tell me what exact drivers the original installation have? I tried the Intel ProSet/Wireless drivers now. The WiFi led flashes, but cannot find any networks.With the original installation I had no problem regarding the WiFi.
My VGA card Nvidia ((Geforce9600m)) has a 54c to 50c on Idle. gaming 87c to near 90c on playing Burnout paradise.
so, is that normal? or should I downclock my VGA? if so . how could I do it. note: my VGA card setting is default.
Is there a way to remove the keyboard from the laptop so it can be cleaned thoroughly?
View 10 Replies View RelatedLet's start off with: Acer Aspire V3-772G (Intel(R) ore(TM) i7-4702MQ CPU @2.20GHz, 8 gb Ram)
Regardless: After noticing a slight dip in preformance from games and use of my laptop in general so i decided to clean the fans. As this laptop is close to impossible to open up i decided to clean it the easy way, to blast compressed air directly into the fan in slow and infrequent blasts. After getting alot of dust out of the system i turned the laptop back on only to hear this "cd-reading"-like hissing from the left side of the laptop (where the fan is). Being worried i might have broken something i turned it stright off, and then on again realising there was not much i could do about it right now.
I am worried i might have spun the fan to fast, causing this, as the fan did not make this sound when i bought it new or before i cleaned it for that sake. It was bought online from a norwegian store (i currently live in norway) at 2014-08-18. I thought i would ask here before i contacted the store or support to see if this is just me over-reacting or if
I have cleaned my Aspire 5750 as it had accumulated dust over last 3years, I stripped down, clean the fan, re-pasted the CPU and put everything back carefully, when I switched it on, the fan spins for a while and turns off, battery gets charged( changing from orange to blue) but only black screen.
I have checked the connections, changed CMOS battery, tried pressing Power button without battery and mains for 20 secs.
Ive taken the back cover off my 5920 many times and really never took a look at it until now. What i noticed is that the vents for the ram are covered by a glossy black see through tape rather than mesh, which covers all the other vents.
Ive linked a picture below: add http into brackets
Has anyone else noticed that in their laptop? or is mine the only one where they ran out of mesh and decided tape was just as good. I wanna just rip it off.
Another thing, has anyone been able to overclock their 5920?(mines got a T8100) ive been searching for days and cant find anyone who has. I always have my backcover off and have my laptop resting on a custom dual 120mm fan notebook cooler. My idle temps are from 37-42, load is just over 60. I wanna push this thing just a bit more.
whenever i press the power button the lights come on, the hdd spins up a bit then it restarts and runs normally....
also, it may not be related but every so often the screen goes blank and comes back saying the drivers were lost and recovered.
this is my HD it was prepartitioned into these 4 Primary Partitions (i did resize C and extended the D partition) any way i know the 1st partition is the recovery but what about that last one?
now i wanna install windows 7 beta to try it out for real (I did try it in VM) so i want to dual boot it with the pre installed Vista Home premium SP1, the problem is i can't create any partitions bcuz i already have 4 primary partitions.
with Paragon Partition manager i can convert the D partition to Logical partition but will my data be safe ... i wanna be sure about that first.
I have a 5930g and I'm thinking of going from my Vista home premium to the Windows 7 beta, has anyone else tried it? I'm mostly thinking of issues with the media touch buttons, wireless, touchpad and the battery settings.
View 4 Replies View RelatedThe settings are "IDE" in BIOS for the HDD.
Bios Ver: v1.21 (got that version by default)
So I got REAL problems when trying to install Win XP Pro SP2 on my brand new Acer Aspire 5930G-733G25Mn.
First I tried to slipstream the ahci driver and making a custom XP disk, that didn't work, I got BSOD before the first part (blue background and white text) of the Windows installation.
Ok so I bought a USB-floppy only for this problem and loaded "f6flpy32_85.zip" onto a floppydisk and pressed "F6" to load SATA drivers under the Win XP installation boot.
EDIT: I extracted the files onto a floppy, there are no .zip file on the floppy only the contents of that .zip file.
I then chose "Intel(R) ICH8M-E/ICH9M-E SATA RAID Controller" then I can get past the "first phase" of the Win XP installation.
BUT when I get to the end of the first installation with an automatic reboot within 15sec or enter to do it directly the following happends:
(I remove the floppy before rebooting).......................
I got myself the Acer Aspire 5930G this past Sunday. I can also mention that my friend bought the exact same computer just a couple hours before, from the same store here in Stockholm, Sweden.
The problem now is that the built in speakers make a fizzing, or I don't know exactly how to describe it, sound, when I play a song for example. The sound became more obvious when having a voiceconversation through Msn with a friend and playing musicvideos on youtube.
Now, my friend appeared to have the same problems with his speaker, just slightly less obvious. It bugged me enough to make a trip back to the store in order to set things straight. Listening to the Demoex at the store, the speakers were even worse, so I just had to accept the fact that "speakers on laptops generally suck"...
I still can't though, and I'd like to know how you experience your built-in speakers, are they "crystal clear" no matter how high of a volume you play (75% and up)?
I got myself 5930G a week ago.
I removed all of the unnecessary programs that Acer put in (they do make decent laptops but really overbload the OS with stupidities) and optimized Vista as much as I could (which is working nicely if i do say so myself ... but I'm still considering on going back to XP SP3 until Windows 7 comes out.).
Right ... I also played Mass Effect for a while on the laptop (maxed out at native res of 1280x800 works without a problem).
Now the only thing is, I'd like to reduce the temperatures of the laptop.
The idle CPU temp is at about 52 degrees, while under load reaches about 72 degrees Celsius (which is pretty good considering the casing).
I will buy myself the ZALMAN ZM-NC2000B cooler ... but what I would also love to do is to undervolt both the CPU and the GPU.
I'm aware the RMClock is not exactly effective when it comes to P7350 cpu.
I tried to undervolt it last night, and as much as I reduced the current going to the multipliers, the temperatures remained the same under stress for prolonged periods of time.
So ... until I find a way to undervolt the cpu and get myself the forementioned cooler, I'd like to undervolt the gpu (9600m GT GDDR3)
If it's possible (and I know it is), I need to know of programs that can be used to acomplish this.
As much as I like my new laptop, it would be nice to further extend it's lifespan (even though it's brand new) and reduce the heat output.
I was also thinking on getting the thermal paste and applying it to cpu/gpu.
Although I'm not sure I want to go ahead with it as I don't want to void the warranty.
how to overclock the cpu/gpu in question without significant gains in temps.
i recently installed WinXP on my Acer 5930G (went from vista). i managed to find all the drivers (including the ICH9M SATA ACHI-mode driver) except one called the SM Bus Controller which is showing up in device manager with a little yellow ! symbol. Does anyone know where I can find this driver? the Intel website and their chipset identifier tool seems to be quite useless. The chipset identifier can't identify anything except the I/O controller (82801MB ICH9M SATA AHCI-mode) which was installed from the '32-bit floppy configuration files'
5930G Specs:
C2D P7350
3GB RAM
Geforce 9600M GT
Intel 965 Express (i think)
does anyone know which SM Bus Controller driver i need for XP?
So I wanted to try out WinXP, to see the performance difference.
At first, the WinXP setup wasn't able to see the HDD. So I changed the SATA Controller Bios mode to IDE mode. (was AHCI for Vista).
I managed to install so have a dual booted system. However I can't use IDE mode for Vista. (must switch SATA bios each time).
Everything installed fine. Even got 3dMark06 increase of 150 points (not much lol). Oh and CrystalMark of 100K instead of 90K on Vista.
But I'd like to use AHCI mode for WinXP. Saw a link in a WinXP 5930g Guide, however that link was out of date.
The driver was called: "Intel(R) ICH9M M-E Family 4 Port SATA AHCI Controller - 2929 Driver".
5930g, every time I but a dvd or cd in my dvd driver it cant be read by the vista.., I just hear sounds in the driver and got nothing at all!
after I restart for 2 or 3 times it works and the vista does recognize it.., I got really sick of this.., so what should i do.., should I install xp or what.., even if that was the solution I need a dvd rw driver to burn a bootable cd with the sata drives..,
Computer: Acer 5930G-733G25Mn
Just finished installing all drivers in Win XP but I can't get the HDMI audio to work.
When I go to "Control Panel" then "Sounds and Audio" and change to "NVIDIA HDMI Audio" the volumebar is down at its lowest and the entire bar is "greyed out". Also if I play some music I hear a "thumping" sound from my TV:s speakers.
The driver I am using is 1.0.0.30 taken directly from the drivercd that I burned out together with recoverydiscs so its an "orginal" Acer (although Vista) driver.
I have also tried 1.0.0.26 to no luck.
My graphic driver is 180.70 with the modded .inf from Laptopvideo2go.
The other device is "Realtek HD Audio output" and it works fine, that driver ought to be me primary audio driver if I'm not misstaken.
I have got a Acer 5930G John Lewis model. I flashed my Nvidia 9600M GT 512mb to overclock it. Everything was ok initially and I was able to play most games maxxed out.
After about 9 months things started going wrong. Initially the laptop would only crash when playing a heavy game such as FEAR or crysis for a long period of time. Then as time went on, the laptop become less tolerant to any GPU processing and now crashes even crashes when playing Quake Live or CS 1.6.
Migrating to Win 7 temporarily fixed the problem, but then things quicky went wrong again.
Before making any modifications, I had backed up all my files on a USB drive as I had no optical media at the time, unfortunately, the drive was placed into a mac by a friend by accident and subsequently formatted. OOPS.
So, I have lost all my original NVflash files and Im stuck with a 9600M that can't take it anymore. Is there anyway I can reclock the timings on the Gfx card or am I screwed?
I've just got my self a new AS 5930G (with the p7350 processor and 9600M GT DDR2 VRAM and 3GB RAM)
first question:
I wanna know if my entire hard drive will be formatted if i used the backup i burned on 2DVDs or just the system partition will be restored?
second Question:
when i go to Nvidia website to see if there any new drivers for my acer i can't find it anywhere
recently bought an acer aspire 5930 with an Nvidia geforce 9600M gt,3GB RAM,and an intel core 2 duo @ 2.00 Ghz.
When I play games I often notice annoying small horizontal wave-like distortions even at the intro videos of some games(Pro Evolution Soccer 09 for example).
I read that it might have been V-sync that cause these horizontal distortions, however turning it off doesn't help at all.
Vertical movement in the scenery seems to cause these wave like effects to occur and I really don't know what do to, I've tried mostly everthing.
I am using Dox's 180.7 drivers, forcing V-sync off etc.
I installed Windows 7 on my 5930G and now - even after uninstalling - I'm stuck with the screen that asks me to choose the OS when I boot my computer (original OS, Vista). What can I do to get rid of the screen?
View 4 Replies View RelatedI have the Acer Aspire 5920G. Since my laptop is starting to get a bit too warm, I would like to know the steps in cleaning the fan for my laptop. I already got a can of compressed air. Can someone please tell me the exact steps to clean the fan?
View 8 Replies View RelatedI have a problem with my keyboard. I think I've been unlucky enough that something has gotten under my 3 and t keys. Not just sitting underneath but in the mechanism itself it would seem. They still work, but they are stiff and I really have to press them to get them to respond. Is there anything I can try to fix it that won't require me to void my warranty or take it to get fixed?
View 7 Replies View RelatedI will lose the warranty or not, if I will go at a local store to upgrade my memory RAM and clean my laptop?
View 5 Replies View Related
