Acer :: 5930g AHCI Driver For WinXP
Sep 29, 2008
So I wanted to try out WinXP, to see the performance difference.
At first, the WinXP setup wasn't able to see the HDD. So I changed the SATA Controller Bios mode to IDE mode. (was AHCI for Vista).
I managed to install so have a dual booted system. However I can't use IDE mode for Vista. (must switch SATA bios each time).
Everything installed fine. Even got 3dMark06 increase of 150 points (not much lol). Oh and CrystalMark of 100K instead of 90K on Vista.
But I'd like to use AHCI mode for WinXP. Saw a link in a WinXP 5930g Guide, however that link was out of date.
The driver was called: "Intel(R) ICH9M M-E Family 4 Port SATA AHCI Controller - 2929 Driver".
View 10 Replies
ADVERTISEMENT
Nov 29, 2008
IDE to AHCI
Here is what I have as IDE ATA/ATAPI Controller
Intel ICH8M 3 port Serial ATA Storage Controller – 2828
Intel ICH8M Ultra ATA Storage Controllers – 2850
Primary IDE Channel
Primary IDE Channel
Secondary IDE Channel
Secondary IDE Channel
My laptop is a 5620z or 5620-4025 with a Hitachi HTS542512K9SA00 ATA Device. When I looked up this HD, it appears to be the standard SATA HD, or is it?
The original setup under VISTA, had ATA Channel 0 (twice) and ATA Channel 1 (twice) instead of the above Primary and Secondary IDE Channels.
The files to be used are in the requested C:Drive, yet I am reluctant to pull the trigger because I am not sure that I should nor am I sure which one of the above is the driver that is to be changed if when I make the change.
NO SOUND
One other thing has be going in circles regarding sound with the Realtek software. The Manager in the 3D Audio Demo works fine………….but……..the MultiMedia, which is most important, indicates that there is NO Audio Device.
View 7 Replies
View Related
Oct 28, 2008
i recently installed WinXP on my Acer 5930G (went from vista). i managed to find all the drivers (including the ICH9M SATA ACHI-mode driver) except one called the SM Bus Controller which is showing up in device manager with a little yellow ! symbol. Does anyone know where I can find this driver? the Intel website and their chipset identifier tool seems to be quite useless. The chipset identifier can't identify anything except the I/O controller (82801MB ICH9M SATA AHCI-mode) which was installed from the '32-bit floppy configuration files'
5930G Specs:
C2D P7350
3GB RAM
Geforce 9600M GT
Intel 965 Express (i think)
does anyone know which SM Bus Controller driver i need for XP?
View 4 Replies
View Related
Feb 13, 2009
5930g, every time I but a dvd or cd in my dvd driver it cant be read by the vista.., I just hear sounds in the driver and got nothing at all!
after I restart for 2 or 3 times it works and the vista does recognize it.., I got really sick of this.., so what should i do.., should I install xp or what.., even if that was the solution I need a dvd rw driver to burn a bootable cd with the sata drives..,
View 10 Replies
View Related
Feb 19, 2009
I purchased a laptop for my sister, it is the HP Dv4-1280us.
I installed WinXP, and found that I am having a hard time finding the drivers for it on the internet.
Even HP's website only have drivers for Vista.
View 5 Replies
View Related
Jun 6, 2009
do i need to slipstream the driver into my DVD when burning the windows 7 image onto my DVD?
if i need to, how can i do that??
View 5 Replies
View Related
Aug 19, 2009
I am about to install Windows 7 thanks to my school's MSDNAA program and plan to use the 64-bit version (replacing Vista/32-bit). I remember from the bloatware removal thread where it is highly recommended to install the AHCI driver before installing the OS since there is a performance boost.
Should I continue to use the AHCI driver before installing Windows 7? On Dell's site, they only list vista versions, so I don't know if it is needed or if it even works with 7.
If I should keep using it, should I use the 32-bit or 64-bit driver on Dell's site? I know it sounds obvious that I would want the 64-bit driver if I am upgrading to a 64-bit OS, but I have heard people say many 64-bit drivers are not as reliable as 32-bit, so I am wondering if it matters which one I use
View 10 Replies
View Related
Jan 2, 2010
I'm gonna clean install Win 7 on my notebook, can someone point me in the direction of an ahci driver,
as I assume I'll need it on installation like when I clean installed Vista?
View 4 Replies
View Related
Jan 12, 2009
So I am trying to find the AHCI driver for my m1530 but I dont see it under drivers for my service tag, does this mean I dont need it? In my BIOS I have that as an option though!
View 4 Replies
View Related
May 7, 2014
I need to find a working AHCI driver (Windows XP)Â for my Elitebook 8570p. I want do use both Windows 7 and XP on it but I can't install windows XP while in AHCI mode. I've tried to use the driver posted in here: [URL] ..... but that did not work for me. I just get bluescreen when I try to install, I've tried all 4 verisions of the driver but none works. I boot on the dvd and press f6 to add the driver before the installation but I need some other driver......
Â
The full model number is: B6Q05EA#AK8
View 7 Replies
View Related
Oct 27, 2013
I got a T430s with the nvidia nvs 5400m and when i try to update drivers etc via the lenovo system update I got a message that I should update the Intel rapid storage driver to 11.2.0.1006, and that isn't even the latest version, but anyway I mark the update and let it install and then reboot. But when I search for updates I have to update the same driver to the same version I just installed. I have tried to remove the driver via device manager, but without results.
View 7 Replies
View Related
Sep 2, 2009
I have a Acer TM 4000 which I am trying to reinstall windows xp. I can boot into windows setup, but as soon as i get to "windows setup is starting windows" the laptop shuts down? i have tried different hard drives, changing the ram, trying battery only and a/c power only... all with the same result..
sometimes i can reach the screen that asks if i want to repair or install windows, but after a few seconds it shuts down
View 10 Replies
View Related
Nov 19, 2008
whenever i press the power button the lights come on, the hdd spins up a bit then it restarts and runs normally....
also, it may not be related but every so often the screen goes blank and comes back saying the drivers were lost and recovered.
View 4 Replies
View Related
Feb 24, 2009
this is my HD it was prepartitioned into these 4 Primary Partitions (i did resize C and extended the D partition) any way i know the 1st partition is the recovery but what about that last one?
now i wanna install windows 7 beta to try it out for real (I did try it in VM) so i want to dual boot it with the pre installed Vista Home premium SP1, the problem is i can't create any partitions bcuz i already have 4 primary partitions.
with Paragon Partition manager i can convert the D partition to Logical partition but will my data be safe ... i wanna be sure about that first.
View 6 Replies
View Related
Feb 21, 2009
I have a 5930g and I'm thinking of going from my Vista home premium to the Windows 7 beta, has anyone else tried it? I'm mostly thinking of issues with the media touch buttons, wireless, touchpad and the battery settings.
View 4 Replies
View Related
Nov 24, 2008
The settings are "IDE" in BIOS for the HDD.
Bios Ver: v1.21 (got that version by default)
So I got REAL problems when trying to install Win XP Pro SP2 on my brand new Acer Aspire 5930G-733G25Mn.
First I tried to slipstream the ahci driver and making a custom XP disk, that didn't work, I got BSOD before the first part (blue background and white text) of the Windows installation.
Ok so I bought a USB-floppy only for this problem and loaded "f6flpy32_85.zip" onto a floppydisk and pressed "F6" to load SATA drivers under the Win XP installation boot.
EDIT: I extracted the files onto a floppy, there are no .zip file on the floppy only the contents of that .zip file.
I then chose "Intel(R) ICH8M-E/ICH9M-E SATA RAID Controller" then I can get past the "first phase" of the Win XP installation.
BUT when I get to the end of the first installation with an automatic reboot within 15sec or enter to do it directly the following happends:
(I remove the floppy before rebooting).......................
View 8 Replies
View Related
Dec 9, 2008
I got myself the Acer Aspire 5930G this past Sunday. I can also mention that my friend bought the exact same computer just a couple hours before, from the same store here in Stockholm, Sweden.
The problem now is that the built in speakers make a fizzing, or I don't know exactly how to describe it, sound, when I play a song for example. The sound became more obvious when having a voiceconversation through Msn with a friend and playing musicvideos on youtube.
Now, my friend appeared to have the same problems with his speaker, just slightly less obvious. It bugged me enough to make a trip back to the store in order to set things straight. Listening to the Demoex at the store, the speakers were even worse, so I just had to accept the fact that "speakers on laptops generally suck"...
I still can't though, and I'd like to know how you experience your built-in speakers, are they "crystal clear" no matter how high of a volume you play (75% and up)?
View 6 Replies
View Related
Nov 3, 2008
I got myself 5930G a week ago.
I removed all of the unnecessary programs that Acer put in (they do make decent laptops but really overbload the OS with stupidities) and optimized Vista as much as I could (which is working nicely if i do say so myself ... but I'm still considering on going back to XP SP3 until Windows 7 comes out.).
Right ... I also played Mass Effect for a while on the laptop (maxed out at native res of 1280x800 works without a problem).
Now the only thing is, I'd like to reduce the temperatures of the laptop.
The idle CPU temp is at about 52 degrees, while under load reaches about 72 degrees Celsius (which is pretty good considering the casing).
I will buy myself the ZALMAN ZM-NC2000B cooler ... but what I would also love to do is to undervolt both the CPU and the GPU.
I'm aware the RMClock is not exactly effective when it comes to P7350 cpu.
I tried to undervolt it last night, and as much as I reduced the current going to the multipliers, the temperatures remained the same under stress for prolonged periods of time.
So ... until I find a way to undervolt the cpu and get myself the forementioned cooler, I'd like to undervolt the gpu (9600m GT GDDR3)
If it's possible (and I know it is), I need to know of programs that can be used to acomplish this.
As much as I like my new laptop, it would be nice to further extend it's lifespan (even though it's brand new) and reduce the heat output.
I was also thinking on getting the thermal paste and applying it to cpu/gpu.
Although I'm not sure I want to go ahead with it as I don't want to void the warranty.
how to overclock the cpu/gpu in question without significant gains in temps.
View 10 Replies
View Related
Dec 27, 2007
I have acer 5570-4011 laptop with vista home (and ubuntu on a separate partition). I rebooted from cd, using winxp pe, deleted all files on vista partition, except those in the root, and started to install win xp pro. After installation files were copied to the hard drive, I restarted without cd and when setup continued, it gave me "file ntkrnlmp.exe could not be loaded. Error code is 7".
On MS support site they say about ACPI or memory problems and suggest to press F7 during that step to skip ACPI check, but it doesnt help in my case.
How can I install WinXP ?
View 4 Replies
View Related
Feb 11, 2009
I've just reinstalled Windows XP on a TravelMate 5510, and almost everything went fine.
All the drivers has been downloaded from here.
Now i got a problem and seems i can't get rid of it.
Audio is not working, but i installed the drivers correctly. The program (AzMixerSel.exe) crashes everytime i run it. I don't know if having this .exe working would let me hear something, but that's an issue.
I installed this audio driver -->
Am i missing something important?
Funny thing is that i got a kind of Bluetooth Audio Controller since when i installed this ->Bluetooth Driver 5.1.2535 and Utilitiy 5.0.1.1500.zip
View 4 Replies
View Related
Jan 11, 2009
I would like to know where i can get windows XP drivers for Acer Aspire 5930G. I want to dual boot XP with the Vista that came preinstalled.
I have two partitions on factory setup: one for VISTA OS and the other is labelled as DATA. I thought of formatting the second partition and installing XP on it. Is this possible? Would a boot menu be created? Or is there any other sequence in which i should install this.
The Specification is as follows:
Intel Core2Duo P8400 2.26 GHz
512 MB nVidia GeForce 9600M GT
4GB DDR2
250 GB HDD
and the rest...
View 7 Replies
View Related
Nov 26, 2008
Computer: Acer 5930G-733G25Mn
Just finished installing all drivers in Win XP but I can't get the HDMI audio to work.
When I go to "Control Panel" then "Sounds and Audio" and change to "NVIDIA HDMI Audio" the volumebar is down at its lowest and the entire bar is "greyed out". Also if I play some music I hear a "thumping" sound from my TV:s speakers.
The driver I am using is 1.0.0.30 taken directly from the drivercd that I burned out together with recoverydiscs so its an "orginal" Acer (although Vista) driver.
I have also tried 1.0.0.26 to no luck.
My graphic driver is 180.70 with the modded .inf from Laptopvideo2go.
The other device is "Realtek HD Audio output" and it works fine, that driver ought to be me primary audio driver if I'm not misstaken.
View 7 Replies
View Related
Oct 5, 2009
I own a 5930G for almost a year.It has an NVidia 9600M GT and it says "1080p full hd" on a sticker.
3 questions:
Using Vlc media player,I have minor sound problems with 720p .mkv files.Particularly,every 3-4 seconds,the sound seems discontinuous for an instant.Is there something I can do about it?
How can I check if I have the latest graphics card drivers and if not,update them?
This and my former aspire acer model,can only burn a few brands of cd/dvds without error.Lots of common brands,like TDK,philips etc get a failure while burning always at the time that the burning process is beyond 80% complete.I start to think that this is a common problem for acer laptops.Can you suggest brands of cd's/dvd's that work well?in my former acer aspire model,"that's write" were the only ones that I could find that worked 100% of the time.And I had tried about 12 known brands.In my 5930g model,I haven't tried to test a lot of brands yet,but the "that's write" brand doesn't work any more.I have burned less than 10 cds and the problem occured right from the beginning.
my battery life is reduced to a mere 30 seconds.Is there a way to recalibrate it?can't seem to find it in the acer e-power management
View 13 Replies
View Related
Oct 5, 2008
I've got problem with my webcam. She worked well when I had got linux Fedora 9 and preinstalled MS Windows Vista. Later I changed Vista 32 bit on Vista 64 bit and I long didn't used the webcam. Later I updated my bios under MS Windows Vista x64 (to v1.19 earlier I had got v1.15). One day I wanted to make a foto with webcam but with no success because Suyin application say Camera not found. Webcam "Vendor ID" is 0c45 and "Product ID" is 63e0. These values indicate on Sonix Webcam but I'am sure that I've got Suyin Webcam and that before I had corect Vendor ID and Product ID for Suyin Webcam. I want to add that i have tried to downgrade to older bios but it makes no difference. I want my Webcam back.
View 10 Replies
View Related
Dec 22, 2008
I rwad a guide and it said all laptops were different so im wondering what this laptop is like. Is t ok to also blow dust etc out and not use compressed air if i cannot get compressed air?
View 4 Replies
View Related
Oct 27, 2008
I have an Acer Aspire 5930G and I'm simply wondering what acer programs are worth still having on the computer (or any programs that came with the computer for that matter e.g. NTI backup now 5) =)
View 4 Replies
View Related
Dec 11, 2009
I have got a Acer 5930G John Lewis model. I flashed my Nvidia 9600M GT 512mb to overclock it. Everything was ok initially and I was able to play most games maxxed out.
After about 9 months things started going wrong. Initially the laptop would only crash when playing a heavy game such as FEAR or crysis for a long period of time. Then as time went on, the laptop become less tolerant to any GPU processing and now crashes even crashes when playing Quake Live or CS 1.6.
Migrating to Win 7 temporarily fixed the problem, but then things quicky went wrong again.
Before making any modifications, I had backed up all my files on a USB drive as I had no optical media at the time, unfortunately, the drive was placed into a mac by a friend by accident and subsequently formatted. OOPS.
So, I have lost all my original NVflash files and Im stuck with a 9600M that can't take it anymore. Is there anyway I can reclock the timings on the Gfx card or am I screwed?
View 10 Replies
View Related
Nov 8, 2008
I decided to restore my aspire 5930g laptop to factory defaults, and started out with creating the restoration discs. At this point, i wasn't really aware that one could restore from the harddrive.
So i booted up the discs and started the restoration process. But now, the dialog tells me to insert the third disc, while i only have two. What should i do? I could try to kill the restoration process and start over from the harddrive, but im afraid to harm the system.
View 6 Replies
View Related
Nov 7, 2008
I've just got my self a new AS 5930G (with the p7350 processor and 9600M GT DDR2 VRAM and 3GB RAM)
first question:
I wanna know if my entire hard drive will be formatted if i used the backup i burned on 2DVDs or just the system partition will be restored?
second Question:
when i go to Nvidia website to see if there any new drivers for my acer i can't find it anywhere
View 7 Replies
View Related
Dec 18, 2008
recently bought an acer aspire 5930 with an Nvidia geforce 9600M gt,3GB RAM,and an intel core 2 duo @ 2.00 Ghz.
When I play games I often notice annoying small horizontal wave-like distortions even at the intro videos of some games(Pro Evolution Soccer 09 for example).
I read that it might have been V-sync that cause these horizontal distortions, however turning it off doesn't help at all.
Vertical movement in the scenery seems to cause these wave like effects to occur and I really don't know what do to, I've tried mostly everthing.
I am using Dox's 180.7 drivers, forcing V-sync off etc.
View 10 Replies
View Related
