I have a Acer TM 4000 which I am trying to reinstall windows xp. I can boot into windows setup, but as soon as i get to "windows setup is starting windows" the laptop shuts down? i have tried different hard drives, changing the ram, trying battery only and a/c power only... all with the same result..
sometimes i can reach the screen that asks if i want to repair or install windows, but after a few seconds it shuts down
I installed Win XP SP2 on my DELL XPS M1530.I followed the steps in the below URL
First disabled “Flash Cache” and set SATA AHCI mode in BIOS to SATA ATA mode.After i installed Win XP SP2 when i tried to install SATA AHCI driver i got the message "system does not meet minimum requirements".
I got the rest of the drivers installed,Win XP is working fine with one problem RAM is showing as 3.5GB when the actual is 4GB.Looking forward for a resolution
Is it possible to install winXP on MBA without the superdrive?
I know you can install Mac OS X via remotely without external cd drive since OS X cd has the file required for it.
So I want to know if there's a way installing winxp without it and if there is, can someone give me a tip or anyone had successful install without the superdrive?
I cannot install a driver for Intel HD Graphics 4000 on my Inspiron 7520 / i7 (Windows 8 64bit).
I downloaded the driver  (11/1/2012, 9.17.10.2843.A02) [URL] .....
But I get an error message: "This computer does not meet the minimum requirements for installing the software.".
The same driver works fine on my second Inspiron 7520 / i5 (Windows 8 64bit).
Why I'm not able to install the driver? because of different processor? i7?
all of a sudden my laptop is not turning on...
i see the power light and the HDD(constantly glowing not blinking as if in use)..and a blank screen...not even the POST screen is showing up
I have a Acer Ferrari 4000 AMD Turion 64 2GHz, and I'm trying to upgrade the internal HDD to an SDD drive (IDE interface) - it's a Photofast G-Monster-IDE SSD 90R/70W 128GB
The drive is working OK - I have conneceted it to the machine via a USB adapter, and partitioned it with no problem, I've also cloned the existing HDD onto the SSD with clonezilla.
But when I put it in the laptop it won't get past the initial splash page with "press F2 for setup" prompt and nothing happens. If I press F2 to enter the Bios, it just says "please wait" and never enters the bios configuration.
The bios version is S3A27
After using my ferrari for about 3 years now it's been with me in a lot of different places, climates, dust conditions and so forth. Lately I started to notice that the laptop was kind of hot , and the primary use of my laptop is internet browsing and office applications so no heavy cpu or gpu loads. The heat was annoying problem but not annoying enough to make me do any actions. But a week ago I noticed that when I watch flash based videos (like youtibe) laptop gets really hot and after 15-20min it just shuts off or reboots . This was annoying as shit. I tried things like putting it on a try of ice, didn't help, and since I don't believe in "gay" things like those cooling pads I decided to get to the root of the problem .
First thing I noticed was that the flow of hot air from the grill around the cpu was very weak, this gave me the hint that the radiator is probably stuck with dust. The solution I came to is simple: open the body clean it and see how it works.............
Acer Ferrari 4000.. Ive upgraded pretty much everything on it from mem to hdd.. Now I would like to buy some faster Turion from ebay and try it on my baby.. Currently I have Turion ML-30 (1.6GHz) I wonder whats fastest CPU supported by MB of this mobo ? ML-40 (2,2GHz)? Are there some specs arround on net about this stuff?
View 4 Replies View RelatedSo I wanted to try out WinXP, to see the performance difference.
At first, the WinXP setup wasn't able to see the HDD. So I changed the SATA Controller Bios mode to IDE mode. (was AHCI for Vista).
I managed to install so have a dual booted system. However I can't use IDE mode for Vista. (must switch SATA bios each time).
Everything installed fine. Even got 3dMark06 increase of 150 points (not much lol). Oh and CrystalMark of 100K instead of 90K on Vista.
But I'd like to use AHCI mode for WinXP. Saw a link in a WinXP 5930g Guide, however that link was out of date.
The driver was called: "Intel(R) ICH9M M-E Family 4 Port SATA AHCI Controller - 2929 Driver".
Is any of you guys have a link for the Cyberlink PowerDVD application file which came with the Ferrari 4000?
View 7 Replies View RelatedIDE to AHCI
Here is what I have as IDE ATA/ATAPI Controller
Intel ICH8M 3 port Serial ATA Storage Controller – 2828
Intel ICH8M Ultra ATA Storage Controllers – 2850
Primary IDE Channel
Primary IDE Channel
Secondary IDE Channel
Secondary IDE Channel
My laptop is a 5620z or 5620-4025 with a Hitachi HTS542512K9SA00 ATA Device. When I looked up this HD, it appears to be the standard SATA HD, or is it?
The original setup under VISTA, had ATA Channel 0 (twice) and ATA Channel 1 (twice) instead of the above Primary and Secondary IDE Channels.
The files to be used are in the requested C:Drive, yet I am reluctant to pull the trigger because I am not sure that I should nor am I sure which one of the above is the driver that is to be changed if when I make the change.
NO SOUND
One other thing has be going in circles regarding sound with the Realtek software. The Manager in the 3D Audio Demo works fine………….but……..the MultiMedia, which is most important, indicates that there is NO Audio Device.
i have a ferrari 4000 lappy. I just noticed that my speakers do not work but my headphones do, which indicates it has to be hardware related,
View 4 Replies View RelatedI have acer 5570-4011 laptop with vista home (and ubuntu on a separate partition). I rebooted from cd, using winxp pe, deleted all files on vista partition, except those in the root, and started to install win xp pro. After installation files were copied to the hard drive, I restarted without cd and when setup continued, it gave me "file ntkrnlmp.exe could not be loaded. Error code is 7".
On MS support site they say about ACPI or memory problems and suggest to press F7 during that step to skip ACPI check, but it doesnt help in my case.
How can I install WinXP ?
I've just reinstalled Windows XP on a TravelMate 5510, and almost everything went fine.
All the drivers has been downloaded from here.
Now i got a problem and seems i can't get rid of it.
Audio is not working, but i installed the drivers correctly. The program (AzMixerSel.exe) crashes everytime i run it. I don't know if having this .exe working would let me hear something, but that's an issue.
I installed this audio driver -->
Am i missing something important?
Funny thing is that i got a kind of Bluetooth Audio Controller since when i installed this ->Bluetooth Driver 5.1.2535 and Utilitiy 5.0.1.1500.zip
When I click on the DVD-RAM drive (E, there is no "Format" option available (missing).
That means that when inserting a blank DVD or CD media in the drive, I cannot format using the operating system format option; however, I can burn DVDs under other (3rd party) media editing programs.
How can I add the "Format" onto the list of other available options such as Eject etc.
By the way, the Operating System is Windows XP 64 bit (with all the latest updates) installed on a Ferrari 4000.
The DVD Drive make is MATSHITA DVD-RAM UJ-845S with the FD-200 firmware installed.
I pretty much messed up my VGNFZ4000, I installed (did a CLEAN install) of Windows7 RC.
Then i came to realize i could not install the Nvidia or FN keys so i decided to go back to Vista 32bits.. But i did not make my Recovery DVD soo i managed to install vista home Premium. But I obiously dont have the drivers. Ive been downloading some from the support site...however im not sure if i need all of those, or which ones?
what is essensial to install to have the best performance
my notebook specs are:
8400 Nvidia graphics card
4gb memory (ram)
I got the HD screen
Blueray reader
intel core 2duo CPU t9300 @ 2.50ghz
I installed XP on my 1530.
Everything works great. Well for sake of full disclosure, I have paired my phone to the laptop via the Bluetooth, but haven't transferred anything. And I don't have an HDMI device to test the HDMI output.
Which brings me to my issue. I can't get video out of the s-video port for love nor money.
I tried the nVidia/Dell driver 174.31. In the nVidia Control Panel/Change the Signal/HD source, I only get one option - Component. I tried reverting the old nVidia Control Panel style based on this thread [url] No joy.
Next, I upgraded to nVidia driver 177.66 from laptopvideo2go.com (with the modded .inf file). Nd change.
I tried both an s-video cable, and the Dell s-video to composite/s/pdif adapter. Nada.
Since I'm running XP and a non-Dell video driver, I really don't want to try Dell support. (I had a 3 hour conversation over the definition of 'overnight' when I ordered this 1530).
What else can I try, check, look for? I have read threads that suggest it might be a bad mainboard, which would suck big-time.
I have a Dell XPS 1330 that happily runs Windows XP.
It has the Mata DVD+-Rw UJ-857G writer.
It can read DVDs alright, but I never ever managed to write any CD or DVD with it .....
Been waiting for these for a while! Dell's last update was 2006 before this. I know, theres modded drivers, but I was looking for something official (stable!)
View 10 Replies View RelatedI want to install WinXP on my Inspiron 1520, but I need the SATA drivers.
View 15 Replies View RelatedFor curiosity I just want to know, If we have dual boot install of WinXP SP and Ubuntu after complete removal of WinVista, does the machine found all drivers and the machine runs smoothly ?
View 8 Replies View RelatedI have a problem with a HP Pavilion dv4000. I have tried to repair windows, and I have also installed windows once more (over the current one to secure that no personal files is deleted).
But when starting up it reboots under loading. at the bluescreen it says "unmountable_boot_volume", and the error code is 0x000000ED.
How is the simplest way to fix this without loosing any private files?
Fixboot?
It's Windows XP Home version.
When I connect my Z590 via HDMI to TV nothing happens. Same TV and HDMI cable work when connecting to a Vista Lenovo laptop
View 3 Replies View RelatedThis dv2000t came with Vista installed but Vista is now broken and erased. I installed WinXP in place of Vista and I notice many of the hardware devices show yellow question mark icons in Windows device manager. The yellow question mark means no driver is installed for the device. I went to the HP driver download page (using a different computer because no network driver for the dv2000t) and I found MANY drivers for dv2000t hardware devices for which I have no driver. I can't tell which specific drivers I need. For example there are drivers for more than one type of network adapter but I don't know which adapter is in my dv2000t. Also the same situation for other hardware devices with missing drivers: the HP site has multiple drivers available and I don't know which one I need. OK
OK there is a service tag on the dv2000t which says:
SERIAL #: 2CE71317GD
PART #: RM669AV
I always use a headset when I need a mic, so I want to basically disable the internal mic but I can't figure it out.
I'm running WinXP with the sigmaTel drivers on my M1530
I have a FZ180E but this could be about any FZ series I guess!
I connect it with HDMI cable with no problem to TV and have sound with windows vista. But with XP I get only image and no sound !
I purchased a laptop for my sister, it is the HP Dv4-1280us.
I installed WinXP, and found that I am having a hard time finding the drivers for it on the internet.
Even HP's website only have drivers for Vista.
I am a newbie to graphics. When I bought my laptop I was told that it has inbuilt intel hd graphics 4000. So when I checked the device manager there was no such driver or device. Is this because it is inbuilt in the processor or have I missed installing any driver.
View 9 Replies View RelatedI have HP Pavilion DV 4000 laptop and I forget BIOS PASSWORD. When I entering password then laptop give me message error code- 07437.
View 3 Replies View RelatedI have had an aspire 5920g for about 18 months now and it was all working fine until I updated the graphic drivers, but the drivers stopped installing halfway through and now I can't install any graphic drivers.
I tried to install my original drivers and they won't install. The system keeps freezing and I think thats the problem.
I've tried making a recovery disc but erecovery won't recognize blank DVD's and acer 'support' are only too happy to grab you by your feet, turn you upside down and let all your money fall out so they can charge you for a reovery disc - absolutely ridiculous - instead of actually trying to help me.
And also for some reason a yellow triangle appeared next to the ACEYTS4Y IDE controller a week after I got it but up until now didn't seem to cause any problems.