Is it possible to install winXP on MBA without the superdrive?
I know you can install Mac OS X via remotely without external cd drive since OS X cd has the file required for it.
So I want to know if there's a way installing winxp without it and if there is, can someone give me a tip or anyone had successful install without the superdrive?
I installed Win XP SP2 on my DELL XPS M1530.I followed the steps in the below URL
First disabled “Flash Cache” and set SATA AHCI mode in BIOS to SATA ATA mode.After i installed Win XP SP2 when i tried to install SATA AHCI driver i got the message "system does not meet minimum requirements".
I got the rest of the drivers installed,Win XP is working fine with one problem RAM is showing as 3.5GB when the actual is 4GB.Looking forward for a resolution
I have a Acer TM 4000 which I am trying to reinstall windows xp. I can boot into windows setup, but as soon as i get to "windows setup is starting windows" the laptop shuts down? i have tried different hard drives, changing the ram, trying battery only and a/c power only... all with the same result..
sometimes i can reach the screen that asks if i want to repair or install windows, but after a few seconds it shuts down
The new MB runs with DDR3 memory but I was woundering to save money to use my existing 4GB DDR2 Modules... Is this posible?
View 3 Replies View RelatedHow easy is it to install windows on a partition of the HD of a Macbook air instead of running windows in a virtual machine environnement of OS X ? It should be much faster and consume less power, no ?
View 4 Replies View RelatedI'm pretty sure I crashed my hard drive. I came back in and my two year old white dual core macbook had froze up. I screwed around with it and finally got it to boot from the external backp drive.(Don't ask me how I did it) I know it had the system on it. I put it on when I did the intial backup a year ago. I tried to reinstall the software but the internal doesn't show up. ANd you can't install to an external hardrive. SO can I just install a new harderive and does anybody have any suggestions as to what brand,size and best deal.
Also there is a ton of upgrades that want to download as the OS I have is over a year old on the external.
I'll be checking in cause I know I probably don't have enough info on here. ANd i aint gonna shut down
Anyone have a quick reference guide to downloading/installing Windows 7 Beta on the macbook pro?
View 10 Replies View Relatedabout installing a SSD drive in a Mac but I have a couple of questions.
Is a clean install really nessasary? I know Windows computers come with lots of bloatware but do Macs?
Do I have to install drivers?
Do SSD's and Mac's play nice together?
For someone with average computer abilties is replacing the hard drive doable?
I have the 13" Macbook Pro 7,1 and everytime I try to install Linux/Windows they come up with errors which basically say that they can't find my HDD or the Optical Drive during installation.
I don't like the idea of being stuck with OS-X.
Turns out it's a MBP 7,1...not 6,1.
I've heard you can't, but don't actually see anything excluding that integrated 9400 on Nvidia's page.
Anyone know? (Or if you can't, can you force install the regular or notebook drivers through device manager as you can on Nvidia hardware under XP?)
To start I should remind everyone that i'm not a mac user. I have never owned a mac or used OSX properly before today. As such, my opinions should be taken as coming from someone who has much knowledge and experience as far as PC's are concerned, but who is a total mac n00b.
First Impressions
When I first walked over to the Macbooks I was quite taken aback. The build quality is out of this world. In fact, I immediately walked over to the latest PC laptops to compare and immediately thought "manufacturing FAIL". Really, the Macbooks are italian sports cars, and PC's are 30 year old farm tractors to use the typical "car analogy".
The Macbook
I really only had any interest in the Macbook when I first went to the Apple stand, but came away with the intention of buying a MacBook Pro. Let me explain:
The MacBook's build quality is awesome. It's solid, no creaking plastic or flexable build, completely and utterly solid. Awesome.............
I have been speculating over this prospect giving the direction that Apple took with the starting price of the 24" iMac (upgrade everything else and downgrade the VRAM).
I mean, this is something I would like to see, but I wonder if it is a smart move on Apple's part given how much they make off the current MBP's with the so called Apple Tax.
And, if they made this move, one has to wonder if it still would be considered a Pro.
This is going to be my very first Mac. I'm really excited about it, but I don't know which one I should go for... I narrowed it down to these two models. Which one should I go for and why?
View 10 Replies View RelatedI bought a black macbook this summer and every night when I'm in bed trying to do work I can barely see which keys is which. Obviously this wouldn't be a cheap fix but is there a way or is it possible to install the new light up keys of the new macbooks onto a pre-remodel macbook?
View 10 Replies View RelatedI downloaded this updated for my unibody Macbook Pro, and I think it's pretty vital. However, it gave me this error when I tried to install it: "You cannot install Macbook, Macbook Pro software update on this volume. This update requires Mac OS X 10.5.5 or newer." Now don't tell me that I have selected the wrong partition to install the update, or that I need to update my OS to 10.5.5 because I already have 10.5.6 and I chose the Macintosh HD partition to install the update.
View 6 Replies View RelatedSo I'm definitely getting a 13" Macbook or Macbook Pro. Apple has some great prices on refurbs so that's probably the route I'll be going however I'm having trouble discerning the difference between the 13" Aluminum Unibody standard macbook and the 13" Unibody Macbook Pro. From what I've read they both have the upgraded screen, they're obviously both unibody, both have the large button-less trackpad, and both have the 9400m. They even have the same dimensions and the only difference I can see between the images is a slightly different case bevel (also the firewire and sd card ports, both are useless to me).
Unfortunately, none of the Apple stores or BestBuys in the area have a non-pro unibody 13" Macbook for me to actually handle and compare. So, basically, what makes the pro version with the slower cpu and smaller hard drive at the same price point worth it?
If I make an image of my hdd from my white macbook with disk utility onto a hard drive I take out of a unibody macbook pro will it work and boot properly?
I will do this by taking the 250gb hdd out of the unibody macbook pro and putting it into a sata external usb hdd enclosure, then making an image of my current 120gb white macbook and writing the image onto the 250gb. After, I plan to put the 250gb hdd back into the macbook pro and boot it up normally as if everything from my white macbook was just copied onto the macbook pro.
Was curious what is the difference between the short-lived aluminum macbooks and macbook pros. Only thing i could spot is the illuminated keyboard.
View 8 Replies View RelatedShe has a white macbook with leopard I think, and has a separate partition in which she has boot camp, she uses specialized software that can only run in windows (doesnt run in vm). She got a new macbook air but wants to keep everything intact.
Do programs like duper clone drives with all files intact, including partitions? Keep in mind that the windows side is more important, installation of this software can only be done remotely from Russia, so it's a bit of a hassle if we screw up, we have to contact IT at a specific time and get them to do it.
Would I have to take the drive of the macbook air out? Or can i just clone to an external hard drive and then move that to the mba hard drive, in target disc mode or something.
I really love the black color of MB404, but is it good? does it crack easily?(is it plastic?)
Hows screen quality?
What do you think? which one should i buy?
I really wanted to buy Alu one before i hear about slanted keys and loose battery covers(i know %99 of them don't have that, but it's hard to risk when there's no way to fix it in here), because there's no Mac center in my country and i'm SO picky.
I've been looking at basicly two models, both got almost the exact same price tag here in Norway, so I'm not sure which one to go for.
The first ones is a MacBook Pro 15" with High-resolution 1650x1080 glossy screen, featuring the top of the line Intel Core i7-620M CPU the other is a MacBook Pro 17" with even higher resolution (1920x1200) glossy screen, featuring the slightly slower Intel Core i5-540M.
I don't list the other specifications as I don't really care about them, I already got a pair of 4GB 1600MHz CL7 (2x2GB) DIM's and a Intel X25-M 80GB SSD that I'll be using anyway.
There will be lots of movies and series played on my MacBook Pro, that's why I don't really considering paying a premium for the anti-glare screen, even though I love anti-glare and tend to struggle with glossy screens I don't see the point in actually paying more for it. And when watching movies and series, in often very dark rooms the glossy screen actually have some advantages.
The hard thing to decide here is slicker and lighter, with smaller screen and lower resolution, but better CPU versus the bigger, more heavy but featuring bigger screen and Full-HD+ resolution but slower CPU.....................
I installed XP on my 1530.
Everything works great. Well for sake of full disclosure, I have paired my phone to the laptop via the Bluetooth, but haven't transferred anything. And I don't have an HDMI device to test the HDMI output.
Which brings me to my issue. I can't get video out of the s-video port for love nor money.
I tried the nVidia/Dell driver 174.31. In the nVidia Control Panel/Change the Signal/HD source, I only get one option - Component. I tried reverting the old nVidia Control Panel style based on this thread [url] No joy.
Next, I upgraded to nVidia driver 177.66 from laptopvideo2go.com (with the modded .inf file). Nd change.
I tried both an s-video cable, and the Dell s-video to composite/s/pdif adapter. Nada.
Since I'm running XP and a non-Dell video driver, I really don't want to try Dell support. (I had a 3 hour conversation over the definition of 'overnight' when I ordered this 1530).
What else can I try, check, look for? I have read threads that suggest it might be a bad mainboard, which would suck big-time.
I have a Dell XPS 1330 that happily runs Windows XP.
It has the Mata DVD+-Rw UJ-857G writer.
It can read DVDs alright, but I never ever managed to write any CD or DVD with it .....
Been waiting for these for a while! Dell's last update was 2006 before this. I know, theres modded drivers, but I was looking for something official (stable!)
View 10 Replies View RelatedI want to install WinXP on my Inspiron 1520, but I need the SATA drivers.
View 15 Replies View RelatedFor curiosity I just want to know, If we have dual boot install of WinXP SP and Ubuntu after complete removal of WinVista, does the machine found all drivers and the machine runs smoothly ?
View 8 Replies View RelatedWhen I connect my Z590 via HDMI to TV nothing happens. Same TV and HDMI cable work when connecting to a Vista Lenovo laptop
View 3 Replies View RelatedSo I wanted to try out WinXP, to see the performance difference.
At first, the WinXP setup wasn't able to see the HDD. So I changed the SATA Controller Bios mode to IDE mode. (was AHCI for Vista).
I managed to install so have a dual booted system. However I can't use IDE mode for Vista. (must switch SATA bios each time).
Everything installed fine. Even got 3dMark06 increase of 150 points (not much lol). Oh and CrystalMark of 100K instead of 90K on Vista.
But I'd like to use AHCI mode for WinXP. Saw a link in a WinXP 5930g Guide, however that link was out of date.
The driver was called: "Intel(R) ICH9M M-E Family 4 Port SATA AHCI Controller - 2929 Driver".
This dv2000t came with Vista installed but Vista is now broken and erased. I installed WinXP in place of Vista and I notice many of the hardware devices show yellow question mark icons in Windows device manager. The yellow question mark means no driver is installed for the device. I went to the HP driver download page (using a different computer because no network driver for the dv2000t) and I found MANY drivers for dv2000t hardware devices for which I have no driver. I can't tell which specific drivers I need. For example there are drivers for more than one type of network adapter but I don't know which adapter is in my dv2000t. Also the same situation for other hardware devices with missing drivers: the HP site has multiple drivers available and I don't know which one I need. OK
OK there is a service tag on the dv2000t which says:
SERIAL #: 2CE71317GD
PART #: RM669AV
I always use a headset when I need a mic, so I want to basically disable the internal mic but I can't figure it out.
I'm running WinXP with the sigmaTel drivers on my M1530