when i have the back cover off i cant get to the heatsink completely.. there isnt so much dust there.. look at the pic in the red squares im pretty sure there is a lot of dust but i cant get to it?
View 7 Replieshow do i dust this thing, i dont just want to spray air into the vents...i actuly want to open it and clean all of it from dust, since i think this is become a problem with me and heating up and lagging in games. So how do i open this up without breaking it, do i unscrew the bottom?
View 5 Replies View RelatedTheres a little speck of dust thats got to be behind the glass that i cant figure out how to clean. Im about 98% sure its not a dead pixel. Can i do anything about this?
Also, i have the tv tuner. How do i start watching tv? Is it through media center? i tried it and it cant recognize it, even after i go through all the steps. when i click on live tv, it says theres not tuner card.
I have an older e4200 (roughly late 2008) and want to let my child use it. Before I hand it down, I want to completely clean the hard drive and start from a "brand new" perfectly clean hard drive with Windows and all the appropriate drivers installed. How do I accomplish this?
View 7 Replies View RelatedThere's all little bits of white dust in the speaker panel and it won't come out if I try to vacuum it.
View 10 Replies View RelatedI actually want to wipe my HDD because I get an error in partition table and I can't use Partition Magic and other tools..
I have created an Acronis Image for my PQService of about 8,5 GB and one for the other Hidden partition 3,5 GB - is this a CompaqSetup Diagnostic partition with ROM BIOS ? or is Acer Arcade-InstantOn ? cause I've seen it's name like CompaqSetup and in some utility program it's says about something with diagnostic.. I'm confused about this... and btw I have already created my Recovery DVD's.
So if I wipe my HDD, after it's all gone I can use my Acer recovery disks and reinstall Vista Ultimate and Restore PQservice and the other partition ? How do I restore my backed up partitions like PQservice and Acer Arcade if I don't have them already when I use Recovery Disks ?
I went into empowering Technology And chose the option Restore to factory default. I followed all the directions and it went to factory default correctly. But then, when i tried to re install (Visual Studio 08) From a CD I noticed that it had the serial already in it.. I had put that serial in befor I chose the factory default option. Does some info like serials stay in registry after the factory default? If Yes then is there a way I can COMPLETLY remove EVERYTHING from my HDD? To its original state?
View 7 Replies View RelatedMy daughter has managed to get a virus on my laptop which has completely wiped it out, it won't start windows, it won't do anything. Its an acer aspire laptop and I worked out it has a partition from googling and did the Alt F10 thing which seemed to work a dream, did a restore to factory defaults etc. etc. but it then started to load windows, I had to choose my location,enter username and password etc. etc. and then nothing, just a blue screen (which is the windows backdrop) and nothing. I've taken the battery out after about 2 hours, restarted the computer and it did the same again and has now been sitting at this blue screen for an hour or so, should I do Alt F10 again? or am I just suppose to wait it out?
View 10 Replies View RelatedI got an E1-572G Acer Laptop and I'm having a problem with it.When I press SHUT DOWN the screen goes black but the power led is on.. and I can't turn it ON because I have to press the POWER BUTTON for about 5 seconds then all the led-s turn off and then I can start it. I searched on Google, made a few changes in settings (FAST STARTUP, etc) but I'm having still the same problem. I have this problem about 2 weeks, and I'm really nervous about it.
View 4 Replies View RelatedHave this laptop a couple of months for sons schoolwork. Now it wont stay on unless power cord in. When its on, verything goes fine, it battery icon says its at 98%avaliable (plugged in, not charging). As soon as cord is out, it dies completely no power even when start button pushed.
View 3 Replies View RelatedI have an Aspire M5-581T. In March of 2014, the battery suddenly stopped working. It would not charge, the unit would not boot from the battery, and if I unplugged the computer from the AC outlet it shut down completely.
View 1 Replies View RelatedI have an Aspire E1-572 that is five months old, running Win 8.1. I've loved the notebook to this point, but now the speakers have quit working completely (the headphone jack still works). I called tech support and they had me delete and reinstall the driver (Realtech high definition audio), which made no difference.
She then told me the next step is to refresh my Windows installation, which will apparently blow away everything I've installed since it was new. I declined to do that because I really don't want to spend an entire day reinstalling all the programs, even though I have the data backed up. Is this truly the only way to make a final determination if it's a hardware or software problem?
i have laptop Acer 5920G
VGA card NVIDIA GeForce 8600 GT
but its performance very bad and i cant believe its up 2 1024
i barely can play FIFA 2007 and its slow!
is it up 2 VGA driver?
setup icon details say it's version is 9.1.0.429
is their any new drivers 4 it .........
My 5920G which I got for Christmas is giving me some problems.
I have gone to power options and and changed the settings so when I close the lid, nothing must happen. But when I come back in about 20 minutes after leaving the lid closed, there is no way of me getting the LCD to start up. The only way I can get past this is by pressing the power button in for a few seconds forcing it to shut down. Obviously this is bad for my notebook. How do I get this sorted out? The same thing happens if I leave the lid open and come back in a while.
well i have decided to replace the stock thermal paste on my 5920g, however, i was suprised to see that acer used therma pads intead of thermal paste
im even more suprised to see that there are thermal pads all over my gpu and cpu
heres a rough picture of how it looks like
silver color denotes where thermal pads where installed
the weird thing is that the copper plate of the heat sink only touches the parts of the picture with the orange circle
should i put AC MX-2 on the areas where i found thermal pads or just on the areas where the copper plates of the heat sink touches the core
I have the Acer Aspire 5920G. Since my laptop is starting to get a bit too warm, I would like to know the steps in cleaning the fan for my laptop. I already got a can of compressed air. Can someone please tell me the exact steps to clean the fan?
View 8 Replies View RelatedI have had a 5920G for nearly a year and it runs great when it is plugged in. As soon as I unplug it when it is 100% charged, the battery runs out in like 30 seconds.
View 7 Replies View RelatedAcer 5920G won't charge. When I plug in the charger the light that normally comes on to indicate that it is charging does not light up and in windows the icon that indicates that it is charging does not come up either.
My PC is the Acer 5920G best buy configuration, about two years old and no components are overclocked.
I was using it when this happened, I just noticed that the light went off and then it wouldn't charge when I plugged in the charger. As far as I know all the other components work correctly though it does have poor battery life. I was downloading a large file so I had it running for about six hours straight if that makes any difference.
I've checked the charger itself and nothing came loose. The green light on the charger also lights up when I plug it in so it is probably not the outlet that is the problem plus I've tried it in multiple outlets.
I'm pretty sure its either the battery or the charger, but I would like to know for sure and get advice from anyone else who may have had this problem.
Past few days I got my 8600M GT 256MB DDR2 GPU overheated and it is broken now. Sigh!! The system was still bootable and I did even hear the login sound not until today when I just unplugged the HDD and GPU myself. When I put them back together, I won't boot as usual. It stops loading a while after I turned it on and stays freeze until I shut it off.
FYI, I removed the HDD to copy a backup of my content into another PC. While connecting to other PC, I did change some setting on the Ownership of some folder to get it accessible. As for the GPU, I just simply removed it to take a look myself and snap some photo of it, then inserted it back as before.
So, I wonder will these techies stuff I did awhile back could corrupted the bios that would make the system halted halfway.
Additional information that I would like to share is that I have decided to replace my GPU with ATi Mobility Radeon HD3650 512MB DDR2 instead of the original and did learn the method to do so. Read on some info regarding flashing the GPU, but was not sure bout it.
I tried installing Service Pack 1 and it won't boot. Microsoft has just sent me a Vista Home Premium Repair CD that will hopefully fix it. I have Recovery Discs, but then I'll lose all my data. This is the 2nd time that my 5920G has broke like this, is there a huge design flaw with this laptop?
Is Acer always like this? It was such a high end laptop for its price (8600M GT, Core 2 Duo 1.5 Ghz, 2 GB RAM, HDMI, HD-DVD, for $1099), but I can never trust this company again.
I recently bought an Aspire 5920G with geforce8600M GT 512MB and windows vista premium.
My graphics card takes more than 700 MB from the RAM memory.
I would like to know if there's a way to make it take less or even disable this option?
I have a 5920g computer which I adore, sadly we always hurt the ones we love, I dropped it and broke the right hinge, because of that the plastic frame of the monitor ripped 2. It still works perfectly fine, but its annoying as hell to watch my lappy like this all the time. I called acer, and found a provider who can repair it for 400 dlrs (I payed 1000 dlrs for the lap) so well, its seem outrageous to me paying 40% of the total price for a hinge replace.
Anyway, I found the hinge and the other parts on Ebay singapore, for less tan 100 dlrs. So, heres my question, does anyone know how hard is it to replace this parts, I am a mildy medium kinda handy guy, with some hardware skills. So anyone know if this is hard, is there a guide around that can show me the process, or should I just pay the 400 dlrs and get this thing done.
Ive taken the back cover off my 5920 many times and really never took a look at it until now. What i noticed is that the vents for the ram are covered by a glossy black see through tape rather than mesh, which covers all the other vents.
Ive linked a picture below: add http into brackets
Has anyone else noticed that in their laptop? or is mine the only one where they ran out of mesh and decided tape was just as good. I wanna just rip it off.
Another thing, has anyone been able to overclock their 5920?(mines got a T8100) ive been searching for days and cant find anyone who has. I always have my backcover off and have my laptop resting on a custom dual 120mm fan notebook cooler. My idle temps are from 37-42, load is just over 60. I wanna push this thing just a bit more.
my fan is making a buzzing noise it's really enoying when i record stuff in the mic you can here it very well
View 8 Replies View RelatedMy 5920g start it wont even get to the postscreen happened right after the hdd got messed up.So i changed i figured that it was just the hdd that kept it from starting but nothing happened.So i asked and some told me it could be anything im really hopping its that its just the gcard since its the 8600m gt.One person told me to put a cd in the drive and if its spins it its probably the card and not the motherboard or cpu but idk.So best case if its the 8600m gt, could i upgrade it to the 9600m gt or the 9650m gt since they also are mxm2.
I think the bios support the 9600m gt but im not sure about the 9650m gt.
I really wana finish my fallout 3 game i was almost at the end.
so one of my hdds died on me so I decided to use the one that I was using as an external hdd.
I reformated that HDD, took out the broken HDD and replaced it with the new one.
I popped in the Recovery disc and everything started and was going smoothly until it hit 18% and it gives me this "Restore Failed - reason 0xd000001e"
I know it's possible to upgrade the hard drive in my Acer 5920G, but I've got no idea what type of hard drive to look for, and which will be compatible etc.
View 10 Replies View RelatedSystem:
CPU: Intel t7500 2.2 Ghz
RAM: 2GB 667Mhz
HD: 1 HD 5400 RPM 250 GB
GPU: Nvidia 8600M gt 512 MB ddr2
I got these temperatures by running orthos to stress the cpu, and furmark to stress the gpu at the same time. Are these temperatures normal for an Acer Aspire 5920g? Cause I find these temperatures rather high, and I'm wondering if these are safe. I already have applied some artic silver 5 thermal compound to the both the gpu and the cpu.
I am a "silver surfer" who is starting to enjoy "playing" and "tweaking" my Acer Aspire 5920G on pre-installed Vista SP1 as a little hobby to pass the time
So far I have confined myself to dabbling with software and Vista itself but am now thinking about becoming more adventurous and upgrading the RAM from present 2GB to 4GB.
Firstly, is this a worthwhile upgrade bearing in mind I do not run any particularly intensive applications? In other words will I notice a performance difference in,for instance, boot times etc ?
Secondly, a few months ago I think I saw an article or thread in this Forum explaining how to increase the RAM in a 5920G and containing a couple of very useful diagrams.
I thought I hibernated or maybe something triggered it back on... i don't know! But my laptop has been sitting inside a drawer while it was running! And I don't remember when the last time I used my laptop and stuck it in there! I opened it up and I saw was BSOD!
So I just turned it off and turned it back on. Nothing posts on the screen and the hard drive light will blink for a second and then stop. Sometimes the fan will just turn off and it will constantly reboot itself. When that happens it only stays on for a few seconds but nothing shows up on the montior.
Man I think I screwed it up. I opened it up and I don't see any physical damage. I even took the heat sinks off and the chips look normal. I don't know what to do now. I have already tried running without a hard drive, only 1 ram stick in either slot. Nothing.